2/3(15–36kg)
trillo eco
high back booster
Instruction Manual
GB
Welcome to Joie™
Congratulations on becoming part of the Joie family! We are so excited
to be part of your journey with your little one. While traveling with Joie
trillo
TM
eco high back booster you are using a high quality, fully certified
safety Group 2/3 booster. This product is suitable for use with children
weighing 15-36kg (approximately 3-12 years old). Please carefully read
this manual and follow each step to ensure a comfortable ride and best
protection for your child.
Please confirm
This booster can be installed using a 3 point retractable adult seat belt
approved to ECE Regulation No. 16 or other equivalent standards.
Booster
! IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ
CAREFULLY.
Please keep the instruction
manual in the storage pocket on
the seat cover underneath the
booster as the right picture.
GB
1
2
3
5
6
4
Parts List
Make sure all parts are available before assembly. If any part is missing,
please contact local retailer. No tools are required for assembly.
1 Head Support
2 Lower Back Support
3 Armrest
4 Base
5 Head Support Adjustment Lever
6 Shoulder Belt Guide
1 2
WARNING
!
Do take care to locate and install the booster seat
so that it is not liable to become trapped by a
moveable seat or in a door of the vehicle.
!
This booster is designed ONLY for child weighing
15-36kg (approximately 3-12 years old or under).
!
Failure to properly use this booster seat increases
the risk of serious injury or death in a sharp turn,
sudden stop or crash.
!
DO NOT use another manufacturers soft goods
with this booster seat. See your retailer for Joie
replacement parts only.
!
DO NOT use in any configuration not shown in the
instructions.
!
According to accident statistics, Children are safer
when properly restrained in rear vehicle seating
positions, rather than front seating positions. For a
vehicle with a front passenger air bag, refer to your
vehicle owner’s manual as well as these
instructions for a booster seat installation.
!
NEVER leave your child unattended.
!
Any straps of vehicle seat should be tightened and
not twisted.
WARNING
!
After your child is placed in this booster, the safety
belt must be used correctly, and ensure that any
lap strap is worn low down, so that the pelvis is
firmly engaged.
!
NEVER leave a booster seat unsecured in your
vehicle. An unsecured booster seat can be thrown
around and may injure occupants in a sharp turn,
sudden stop or crash. Remove it or make sure that
it is securely belted in the vehicle.
!
NEVER leave luggage or other objects unsecured
in a vehicle, they are liable to cause injuries in the
event of a collision.
!
Replace the booster seat after an accident of any
kind. An accident can cause damage to the
booster seat that you cannot see.
!
DO NOT modify your booster seat or use any
accessories or parts supplied by other
manufacturers.
!
The booster seat can become very hot if left in the
sun. Contact with these parts can burn your child’s
skin. Always touch the surface of any metal or
plastic parts before putting your child in the
booster seat.
3 4
WARNING
!
NEVER use a booster seat if it has damaged or
missing parts. DO NOT use a cut, frayed or
damaged vehicle seat belt.
!
NEVER give this booster seat to someone else
without also giving them this manual.
!
NEVER use a second-hand booster seat or a
booster whose history you do not know.
!
DO NOT use this booster without the soft goods.
!
DO NOT use any load bearing contact points other
than those described in the instructions and
marked on the booster seat.
!
DO NOT face your booster toward the rear of the
vehicle.
!
To avoid burns, never put hot liquids in your
cupholders.
!
DO NOT use this booster for more than 10 years
after the date of purchase, as parts may degrade
over time, or from exposure to sunlight, and may
not perform adequately in a crash.
!
The soft goods should not be replaced with any
besides the ones recommended by the
manufacturer, because the soft goods constitute
an integral part of the booster seat performance.
Emergency
In case of emergency or accidents, it is most important to have
your child taken care of with first aid and medical treatment
immediately.
Product Information
Read all the instructions in this manual before using
this product. If in doubt, consult either the booster seat
manufacturer or the retailer.
1. This booster is a ‘Universal’ child restraint. It is approved
to UN ECE regulation 44, 04 series of amendments, for
general use in vehicles and it will fit most, but not all, car
seats.
2. A correct fit is likely if the vehicle manufacturer has declared
in the vehicle handbook that the vehicle is capable of
accepting a ‘Universal’ booster seat for this age group.
3. This booster has been classified as ‘Universal’ under
more stringent conditions than those which applied to earlier
designs which do not carry this notice.
Product Booster
Suitable for Child weighing15-36kg
Mass Group Group 2/3
Materials Plastics, metal, fabrics
Patent No. Patents pending
5 6
3. When attaching backrest to
base, please press backrest
down strongly. “U”-shaped
hooks on bottom of backrest
will interlock with bars on
base.
4
!
Shake the backrest to
make sure the recline
mount is correctly fixed.
!
Do not use this booster
seat base separately.
see images 1 -
6
1. Booster taken from the
carton as
1
2. Flip head support and lower
back support over as shown.
2
!
Squeeze adjustment lever
2
-1 and slide two pieces
together until they snap
into place.
2
-2
Booster Assembly
1
2
1
2
3
4
5
7 8
8
9
2
10
1
Height Adjustment
for Head Support
7
see images 7
see images
8 -
10
6
4. The completely assembled
booster is shown as
6
Concerns on Installation
2
3
1
2
3
1
1
2
4
3
5
7
6
1
2
4
3
5
7
6
9 10
12
15
14
16
Installation with 3-point-belt
11
!
To ensure the correct head
support height is obtained,
the bottom of the headrest
MUST be even with the top of
child’s shoulders as shown in
14
and the shoulder belt
must be positioned in the red
zone as shown in
15
.
!
Place a booster seat firmly
against the back of a
forward-facing vehicle seat
equipped with a lap/shoulder
belt.
!
Have your child sit in a
booster seat with their back
flat against back of a booster
seat.
!
NOT as shown in
17
. Fasten
buckle and pull up on the
shoulder belt to tighten.
!
If the belt lays across child
neck, head or face, readjust
head support height.
!
Belt must not be twisted.
Please make sure that the backrest of the child safety seat
rests flat against the backrest of the car seat so that the child
seat is under no circumstances in a reclined position.
12
Pull
the vehicle safety belt and pass through the belt path
13
, and
then buckle it up.
13
-3
!
Position shoulder belt through the shoulder belt guide
shown in
13
-1
!
DO NOT position vehicle belt over top of the armrests. It
must pass underneath the armrests.
13
-2
!
The lap belt must be low down on hips. The booster is
shown as
13
!
The booster seat can not be used if the vehicle safety
belt buckle (female buckle end) is too long to anchor the
booster seat securely.
13
-4
see images 11 -
17
13
3
1
2
4
17
11 12
18
1
PULL
Detach Soft Goods
Open 2 pairs of buttons and 6 pairs of elastics on the back
of soft goods to remove it.
18
!
Pull down to remove button as
18
-1
To refit the seat pad simply reverse the steps above.
see images
18
Care and Maintenance
!
Please wash the soft goods and inner padding with cold
water under 30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted neutral detergent, gasoline or other
organic solvent to wash the booster. It may cause damage
to the booster.
!
Do not twist the soft goods and inner padding to dry with
great force. It may leave the soft goods and inner padding
with wrinkles.
!
Please hang dry the soft goods and inner padding in the
shade.
!
Please remove the booster from the vehicle seat if not in
use for a long period of time. Put the booster in a cool, dry
place and somewhere your child cannot access it.
P-IM0234C
Share the joy at joiebaby.com
Joie Children's Products (UK) Ltd,
Venture Point, Towers Business Park,
Rugeley, Staffordshire, WS15 1UZ
Loading...