Jokab Safety Smile 11R Data Sheet
www.jokabsafety.com
11:21
1
11
2
3
4
5
6
7
8
9
10
13
14
12
When do I need reset push button?
Smile 11RA/B are reset Push buttons intended to reset safety circuits. Smile 11RA has a connections for the NO-contact and for the LED
in the PB. The reset LED is o be turned of after reset of the safety circuit.
Smile 11RB is used together with our Pluto Safety Plc in order to reduce
the numder of terminals, on terminal is used as both input for the reset
as well as output for the LED.
Reset button
Smile 11R
Technical data – Smile 11R
Manufacturer ABB AB/Jokab Safety, Sweden
Article number/
ordering data
Smile 11RA
Smile 11RB
2TLJ030053R0000
2TLJ030053R0100
Colour
Base
Pushbutton
yellow
blue
Material
Housing
Pushbutton contact
Polyprobylene PP
Au
Power Supply
LED operating voltage
LED current consumption
Pushbutton operating voltage
Pushbutton current consumption
Pushbutton rated power
24 VDC (maximum 33 VDC)
20 mA at 24 VDC
30 mA at 33 VDC
Min: 5 V, max: 35 V
Min: 1 MA, max 100 mA
Max: 250 mW
Ambient temperature -25...+55°C
Humidity range 35 to 85% (with no icing or
condensation)
Protection class IP65
Connectors 5-pole male M12 connector
Size 84x40x36 (LxWxH) + 12 mm
for M12 connector (L)
Weight aprox. 60 g
Mechanical life 1.000.000 operations at
10 mA/24 VDC
Switching reliability 10 x 10
-6
at 5 mA/24 VDC
Loading...