Johnson Level 40-6184 User Manual

7722H_Manuals 1/17/14 8:02 AM Page 1

Three-Beam Magnetic Torpedo Laser Dot

Model No. 40-6184

Instruction Manual

Congratulations on your choice of this Magnetic Torpedo Laser Dot. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual for future use.

This is a Class IIIa laser tool and is manufactured to comply with CFR 21, parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

7722H_Manuals 1/17/14 8:02 AM Page 2

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check and Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Product Registration

14. Accessories

1. Kit Contents

Description Qty.

Magnetic Torpedo Laser Dot 1 “AA” Alkaline Batteries 3 Leveling Bracket 1 Instruction Manual with Warranty Card 1 Soft-Sided Pouch 1

2. Features and Functions

• Simultaneously projects three beams for level, plumb and square applications

• Leveling vials are in four directions: 45º, 90º, 180º and cross check

• Magnetic base attaches onto any ferrous surfaces

• Able to work with a 1/4" - 20 tripod

• Removable base plate can make horizontal leveling more convenient

• V-groove aligns unit with pipes.

7722H_Manuals 1/17/14 8:02 AM Page 3

3. Safety Instructions

Please read and understand all of the following instructions, prior to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa Laser Product Max. Power Output: ≤ 5mW Wavelength: 640-660nm

THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months) to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt to repair this tool, warranty will be void.

• Use only original Johnson authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

parts and accessories purchased from your Johnson

7722H_Manuals 1/17/14 8:02 AM Page 4

4. Location/Content of Warning Labels

7722H_Manuals 1/17/14 8:02 AM Page 5

5. Location of Part/Components

3 beams: plumb, level & square Laser output windows

Strap raceway (strap

not included)

Leveling Bracket

Precision vials

Magnetic base

1/4" Screw hole

Adjustable support feet

1/4" bolt

Battery door

On/off switch

V-groove

Laser reference edge

+ 11 hidden pages