Johnson Controls Interiors FN145HL3 User Manual
Re: Certification for JCI FN145 Series Transmitter
Models: FN145-AB, BB,DB,EB,FB,JB
FCC ID: CB2FN145HL3
CANADA: to be provided by IC
USER'S MANUAL INFORMATION
(PRELIMINARY)
The User's Manual is in preparation. The following material will be contained in the
manual:
FCC ID: CB2FN145HL3 CANADA: to be provided by IC
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The Owners Manual for the Homelink® series Universal Garage Door Opener is reproduced here.
HomeLink® Universal Transceiver
Suggested Owner’s Manual Text
October, 2000
HomeLink® Universal Transceiver
The HomeLink® Universal Transceiver in your vehicle provides a convenient way to replace up to three handheld transmitters with a single built -in component. This innovative feature will learn the radio frequency codes
of most current transmitters used to activate devices such as garage doors, entry door locks, estate gates,
security systems, and home or office lighting. For additional information on HomeLink and/or HomeLink
compatible products, call 1-800-355-3515 or refer to the HomeLink web site at www.homelink.jci.com.
Precautions
When programming the HomeLink Universal Transceiver to a garage door opener or entry
gate, make sure that people and objects are out of the way to prevent potential harm or
damage.
Do not use the HomeLink Universal Transceiver with any garage door opener that
lacks the safety stop and reverse feature as required by federal safety standards. (This
includes any garage door opener model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object, signaling the door to stop and reverse, does
not meet current federal safety standards. Using a garage door opener without these
features increases risk of serious injury or death. For more information, call
1-800-355-3515 or on the internet at www.homelink.jci.com.
Retain the original transmitter for future programming procedures (i.e., new vehicle
purchase). It is also suggested that upon the sale of the vehicle, the programmed
HomeLink Universal Transceiver buttons be erased for security purposes (follow step
1 in the “Programming” portion of this text).
Loading...