Johnson Controls Interiors BLUE15M Users Manual

Features

■ Customization flow

Press the SETTINGS button.

uuCustomized Features u

Display

Brightness

Contrast

Black Level

Sync Display Brightness

System

Settings

Default

Bluetooth

Voice

Recog

Clock

Clock/Wallpaper

Bluetooth Status

Bluetooth Device List

Edit Pairing Code

Voice Prompt

Type

Clock

Wallpaper

Clock Adjustment

Clock Format

LanguageOthers

Display Operation Restriction Tips

Background Color

Header Clock Display

Factory Data Reset

Continued

249

uuCustomized Features u

Features

Default

Memory Position Link

* Not available on all models

250

Vehicle

Settings

Driver Assist

System

Setup

Meter Setup

Driving

Position

Setup

Keyless

Access

Setup

Lighting

Setup

Forward Collision Warning Distance

ACC Pre-Running Car Detect Beep

ACC Display Speed Unit

Lane Keeping Assist Suspend Beep

Blind Spot Info

Language Selection

Adjust Outside Temp. Display

“Trip A” Reset Timing

“Trip B” Reset Timing

Turn by Turn Display

Steering Wheel Movement At Entry/Exit

Auto Seatbelt Tension

Door Unlock Mode

Keyless Access Light Flash

Keyless Access Beep

Remote Start System On/Off

Interior Light Dimming Time

Headlight Auto Off Timer

Auto Light Sensitivity

Features

Door

Setup

*1: May change depending on your currently selected source.

uuCustomized Features u

Auto Door Lock

Auto Door Unlock

Key And Remote Unlock Mode

Keyless Lock Answer Back

Security Relock Timer

Power

Tailgate

Setup

Camera

Settings

Power Tailgate Keyless Open Mode

Power Tailgate Open by Outer Handle

Preferred IDS ModeIDS Setup

Maintenance ResetMaintenance Info.

Fixed Guideline

Dynamic Guideline

Default

Sound

Audio

Settings

Source Select Popup

Cover Art

Connect Bluetooth Audio Device

Bluetooth Device List

Default

Continued

251

uuCustomized Features u

Features

Add Bluetooth

Device

Disconnect

Default

Phone

Connect phone

252

Phone

Settings

Info

Settings

Default

Bluetooth Device

List

Edit Bluetooth

Device

Add Bluetooth

Device

Edit Speed Dial

Auto Transfer

Auto Answer

Ring Tone

Automatic Phone Sync

Use Contact Photo

Text/Email

Clock

Enable Text/Email

Select Account

New Text/Email Alert

Clock/Wallpaper Type

Clock Adjustment

Others

Clock Format

Info Screen Preference

Features

■ List of customizable options

Setup

Group

System Settings

*1:Default Setting

Customizable Features Description Selectable Settings

Sync Display Brightness

Display

Brightness

Contrast

Black Level

Selects whether the display brightness synchronizes with the instrument panel brightness.

Changes the brightness of the audio/information screen.

Changes the contrast of the audio/information screen.

Changes the black level of the audio/information screen.

uuCustomized Features u

On*1/Off

—

Continued

253

uuCustomized Features u

Features

System Settings

*1:Default Setting

254

Setup

Group

Customizable Features Description Selectable Settings

Bluetooth Status Turns the Bluetooth® on and off. On

Pairs a new phone to HFL, edits and deletes a

Bluetooth

Voice Recog

Clock

Bluetooth Device List

Edit Pairing Code

paired phone, and creates a security PIN.

2 Phone Setup P. 274

Changes a pairing code.

2 To change the pairing code setting P. 276

Random/Fixed

Voice Prompt Turns the voice prompt on and off. Beginner*1/Expert

Clock Changes the clock display type.

Clock/ Wallpaper Type

Wallpaper

Clock Adjustment

●

Changes the wallpaper type.

●

Imports an image file for a new wallpaper.

●

Deletes an imported wallpaper (default wallpapers can be deleted).

2 Wallpaper Setup P. 213

Adjust Clock.

2 Clock P. 114

Analog/Digital*1/ Small Digital/Off

Blank/Galaxy*1/ Metallic

Clock Format Selects the digital clock display from 12H to 24H. 12H*1/24H

/Off

—

uuCustomized Features u

Features

Setup

Group

System Settings

*1:Default Setting

Customizable Features Description Selectable Settings

English*1/Français/ Español

On*1/Off

Blue*1/Amber/Red/ Green

Others

Language Changes the display language.

Display Operation Restriction Tips

Alerts you when manual control of the system is disabled to prevent distraction while driving.

Changes the background color of the audio/

Background Color

information screen and the On Demand MultiUse Display

Header Clock Display Selects whether the clock display comes on. On*1/Off

Factory Data Reset

Default

Resets all the settings to their factory default.

2 Defaulting All the Settings P. 265

Cancels /Resets all customized items in the

System Settings group as default.

Default/OK

—

Continued

255

uuCustomized Features u

Features

* Not available on all models

Vehicle Settings

*1:Default Setting

256

Setup

Group

Customizable Features Description Selectable Settings

TM*

Long/Normal Short/Off

On/Off

mph*1/km/h (U.S.) mph/km/h

On/Off

Audible And Visual Alert Off

Driver Assist System Setup

Forward Collision Warning Distance

ACC Forward Vehicle Detect Beep

ACC Display Speed Unit

Lane Keeping Assist Suspend Beep

Blind Spot Info

Changes at which distance FCW* or CMBS alerts, or turns FCW

on and off.

Causes the system to beep when the system detects a vehicle, or when the vehicle goes out of the ACC with LSF range.

Changes the speed unit for ACC with LSF on the

multi-information display (MID).

Cause the system to beep when the LKAS is suspended.

Changes the setting for the blind spot information.

(Canada)

/Visual Alert/

uuCustomized Features u

Features

* Not available on all models

Setup

Group

Vehicle Settings

*1:Default Setting

Customizable Features Description Selectable Settings

Meter Setup

Keyless Access Setup

Language Selection

Adjust Outside Temp. Display

“Trip A” Reset Timing

“Trip B” Reset Timing

Turn by Turn Display

Door Unlock Mode

Keyless Access Light Flash

Keyless Access Beep

Remote Start System On/

Off

Changes the displayed language on the multiinformation display.

Adjust the temperature reading by a few degrees.

Changes the setting of how to reset trip meter A, average fuel economy A, average speed A, and elapsed time A.

Changes the setting of how to reset trip meter B, average fuel economy B, average speed B, and elapsed time B.

Selects whether the turn-by-turn display comes on during the route guidance.

Changes which doors unlock when you grab the driver’s door handle.

Causes some exterior lights to flash when you unlock/lock the doors.

Causes the beeper to sound when you unlock/ lock the doors.

Turns the remote engine start feature on and off. Enabled*1/Disabled

English Español

-5°F

-3°C ~ ±0°C*1 ~ +3°C

(Canada)

With Refuel/IGN Off/ Manually Reset

Driver Door Only All Doors

±0°F*1 ~

/Off

/Français/

+5°F

(U.S.)

Continued

257

uuCustomized Features u

Features

* Not available on all models

Vehicle Settings

*1:Default Setting

258

Setup

Group

Customizable Features Description Selectable Settings

60seconds/ 30seconds 15seconds

60seconds/ 30seconds/ 15seconds

Lighting Setup

Interior Light Dimming Time

Headlight Auto Off Timer

Changes the length of time the interior lights stay on after you close the doors.

Changes the length of time the exterior lights stay on after you close the driver’s door.

0seconds

Driving Position Setup

Auto Light Sensitivity

Memory Position Link

Steering Wheel Movement At Entry/Exit

Auto Seatbelt Tension

Changes the timing for the headlights to come on.

Turns the driving position memory system using a remote transmitter on and off.

Moves the steering wheel fully up when you get in/get out of the vehicle.

Turns the setting for the automatic seat belt epretensioner activation on and off.

Max/High/Mid Low/Min

/Off

uuCustomized Features u

Features

Setup

Group

Vehicle Settings

*1:Default Setting

Customizable Features Description Selectable Settings

Auto Door Lock

Changes the setting for the automatic locking feature.

With Vehicle Speed Off

All Doors When Driver’s Door Opens When Shifted to Park/All Doors When Ignition Switched Off/Off

Driver Door Doors

90seconds/ 60seconds/ 30seconds

Door Setup

Auto Door Unlock

Key And Remote Unlock Mode

Keyless Lock Answer Back

Security Relock Timer

Changes the setting for when the doors unlock automatically.

Sets up either the driver’s door or all doors to unlock on the first push of the remote or built-in key.

LOCK/UNLOCK- The exterior lights flash. LOCK (2nd push)- The beeper sounds.

Changes the time it takes for the doors to relock and the security system to set after you unlock the vehicle without opening any door.

/Shift from P/

/All Doors

/Off

/All

Continued

259

uuCustomized Features u

Features

Vehicle Settings

Camera Settings

*1:Default Setting

260

Setup

Group

Customizable Features Description Selectable Settings

Power Tailgate Setup

IDS Setup

Maintenance Info.

Default

Guidelines

Default

Power Tailgate Keyless Open Mode

Power Tailgate Open by Outer Handle

Preferred IDS Mode

Maintenance Reset

Fixed Guideline

Dynamic Guideline

Changes the keyless setting for when the power tailgate opens.

Selects whether to enable the power tailgate open operation using the tailgate outer handle.

Changes the IDS mode setting for when you set the power mode to ON.

Resets the engine oil life display when you have performed the maintenance service.

Cancels/Resets all customized items in the Vehicle Settings group as default.

Selects whether the fixed guidelines come on the rear camera monitor.

Selects whether the dynamic guidelines come on the rear camera monitor.

Cancels/Resets all customized items in the

Camera Settings group as default.

Anytime*1/When Unlocked

Off (Manual Only)/ On (Power/ Manual)

Last Used Normal/Sport

Default/OK

On*1/Off

Default/OK

/Comfort/

—

uuCustomized Features u

Features

CD (MP3/WMA/AAC), iPod®, USB, Pandora®* or Aha

mode

Bluetooth® Audio, Pandora®* or AhaTM mode

* Not available on all models

Setup

Group

Audio Settings

*1:Default Setting

Customizable Features Description Selectable Settings

-6 ~ C*1 ~ +6 (Bass, Treble and

Sound

Adjusts the settings of the audio speaker’s sound.

2 Adjusting the Sound P. 215

Subwoofer), -9 ~ C +9 (Fader, Balance), Off/Low/Mid

(SVC)

Selects whether the list of selectable audio

Source Select Popup

sources comes on when the AUDIO button is

On/Off

pressed.

Turns on and off the cover art display. On

Cover Art

Connects, disconnects or pairs a Bluetooth®

Connect Bluetooth Audio Device

Audio device to HFL. Edits or deletes a Bluetooth® Audio device paired

Bluetooth Device List

Default

to HFL.

Cancels/Resets all customized items in the Audio

Settings group as default.

Default/OK

/Off

/High

—

Continued

261

uuCustomized Features u

Features

Phone Settings

*1:Default Setting

262

Setup

Group

Customizable Features Description Selectable Settings

Pairs a new phone to HFL, or connects or

Phone

Connect phone

Bluetooth Device List

Edit Speed Dial

disconnects a paired phone.

2 Phone Setup P. 274

Pairs a new phone to HFL, edits or deletes a paired phone, or creates a security PIN.

2 Phone Setup P. 274

Edits, adds or deletes a speed dial entry.

2 Phone Setup P. 274

—

uuCustomized Features u

Features

Setup

Group

Phone Settings

*1:Default Setting

Customizable Features Description Selectable Settings

Sets calls to automatically transfer from your phone to HFL when you enter the vehicle.

Sets whether to automatically answer an incoming call after about four seconds.

Sets a phonebook data to be automatically imported when a phone is paired to HFL.

Displays a caller’s picture on an incoming call screen.

Turns the text message/E-mail function on and off.

Selects whether a pop-up alert comes on the screen when HFL receives a new text message/E-

On*1/Off

On/Off

Fixed/Mobile Phone

On/Off

On*1/Off

On/Off

Phone

Text/ Email

Auto Transfer

Auto Answer

Ring Tone Selects the ring tone.

Automatic Phone Sync

Use Contact Photo

Enable Text/Email

Select Account Selects a mail or text message account. —

New Text/Email Alert

mail.

Default

Cancels/Resets all customized items in the Phone Settings group as default.

Default/OK

/Off

Continued

263

uuCustomized Features u

Features

Info Settings

*1:Default Setting

264

Setup

Group

Customizable Features Description Selectable Settings

Clock

Clock/ Wallpaper Type

Clock

Wallpaper

See System Settings on P. 253 to P. 255.

Clock Adjustment

Clock Format

Selects either of the following to be displayed when you press the INFO button.

Other Info Screen Preference

• Info Top: Some of the available menu items

pop up.

• Info Menu: All available menu items pop up.

Info Top/Info Menu

• Off: The menu item you selected last time is

displayed.

Default

Cancels/Resets all customized items in the Info Settings group as default.

Default/OK

/Off

Features

1Defaulting All the Settings

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.

uuCustomized Features uDefaulting All the Settings

Defaulting All the Settings

You can reset all the menu and customized settings as the factory defaults.

1. Press the SETTINGS button.

2. Rotate to select System Settings, then

press .

3. Rotate to select Factory Data Reset,

then press .

u The pop-up menu appears on the screen.

4. Rotate to select Yes, then press .

u The confirmation message will appear.

5. Rotate to select Yes, then press

again to reset the settings.

u The confirmation message will appear.

Press to select OK.

265

Features

1HomeLink® Universal Transceiver

HomeLink® is a registered trademark of Johnson Controls., Inc.

Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an “electronic eye,” or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.

HomeLink® Universal Transceiver

The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

Important Safety Precautions

■

Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.

Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage.

When programming a garage door opener, park just outside the garage door’s path.

Training HomeLink

If you have not trained any of the buttons in HomeLink before, you should erase any previously learned codes. To do this:

• Press and hold the two outside buttons for about 20 seconds, until the red indicator blinks. Release the buttons, and proceed to step 1.

Red Indicator

• If you are training the second or third button, go directly to step 1.

266

Features

Training a Button

1Training HomeLink

Retraining a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure:

Press and hold the desired HomeLink button until the HomeLink indicator begins to blink.

Continue to hold the HomeLink button and follow steps 1 - 3 under “Training a Button.”

Indicator remains on for about 25 secs.

Standard transmitter

Indicator blinks rapidly for 2 secs, then remains on for about 23 secs.

Rolling code transmitter

Erasing Codes To erase all the codes, press and hold the two outside buttons until the HomeLink indicator begins to blink (about 10 to 20 secs). You should erase all codes before selling the vehicle.

If you have any problems, see the device’s instructions, visit www.homelink.com, or call HomeLink at (800) 355-3515.

Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the HomeLink button you want to program.

Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink after 10 secs?

Press and hold the programmed HomeLink button for about a sec. Does the device (garage door opener) work?

Press and hold the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 secs. Does the LED blink within 20 secs?

Training Complete

Press and hold the HomeLink button again.

Press and hold the HomeLink button again. The remote-controlled device should operate.

Training Complete

The remote has a rolling code. Press the “learn” button on the remote-controlled device (e.g. garage door opener).

Within 30 secs, press and hold the programmed HomeLink button for 2 secs.

HomeLink indicator blinks for 2 secs,

then remains on.

HomeLink LED

is on.

YES

■

uuHomeLink® Universal Transceiver uTraining HomeLink

267

Features

1Bluetooth® HandsFreeLink®

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

• U.S.: Visit www.acura.com/handsfreelink, or call 1-

888-528-7876.

• Canada: Visit www.handsfreelink.ca, or call 1-888-

528-7876.

To use HFL, the Bluetooth setting must be On.

2 Customized Features P. 248

Voice control tips:

• Aim the vents away from the ceiling and close the

windows, as noise coming from them may interfere with the microphone.

• Press and release the button when you want to

call a number using a stored voice tag, a phonebook name, or a number. Speak clearly and naturally after a beep.

• If the microphone picks up voices other than yours,

the command may be misinterpreted.

• To change the volume level, use the audio system’s

volume knob or the remote audio controls on the steering wheel.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

If you receive a call while using the audio system, the system resumes its operation an after ending the call.

Models with navigation system

Models without navigation system

Talk Button

Volume up

Microphone

Hang-up/Back Button

Pick-up Button

Volume down

Interface Dial

PHONE Button

Bluetooth® HandsFreeLink®

See Navigation System Manual for how to operate Bluetooth® HandsFreeLink®.

Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using

your vehicle’s audio system, without handling your cell phone.

Using HFL

HFL Buttons

■

(Pick-up) button: Press to go to the Speed Dial/Call History on the multi-

information display or to answer an incoming call.

(Hang-up/back) button: Press to end a call, to cancel a command or to clear

the phone information on the MID.

(Talk) button: Press to give HFL voice commands. PHONE button: Press to go directly to the Phone screen. Interface dial: Rotate to select an item on the screen, then press . Move ,

, or to select secondary menu.

268

Features

HFL Status Display

1Bluetooth® HandsFreeLink®

Bluetooth® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.

1HFL Status Display

The information that appears on the audio/ information screen varies between phone models.

You can change the system language to English, French, or Spanish.

2 Customized Features P. 248

■

The audio/information screen notifies you when there is an incoming call.

Bluetooth® Indicator

Comes on when your phone is connected to HFL.

HFL Mode

Battery Level Status

Roam Status

uuBluetooth® HandsFreeLink®uUsing HFL

Caller’s Name

Caller’s Number

Limitations for Manual Operation

■

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored speed dial entries with voice tags, phonebook names, or numbers

Disabled Option

can be called using voice commands while the vehicle is in motion.

Signal Strength

2 Speed Dial P. 285

269

uuBluetooth® HandsFreeLink®uHFL Menus

Features

1HFL Menus

To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.

HFL Menus

The power mode must be in ACCESSORY or ON to use HFL.

■ Phone Settings screen

Phone

*1: Appears only when a phone is connected to HFL.

Connect

phone

Bluetooth

Device List

270

1. Press the SETTINGS button.

2. Rotate to select Phone Settings, then

press .

(Existing entry list)

Add Bluetooth

Device

Disconnect

(Existing

entry list)

Add Bluetooth

Device

Connect a phone to the system.

Pair a phone to the system.

Disconnect a paired phone from the system.

Edit Device

Replace This

Delete This

Pair a phone to the system.

Name

Edit PIN

Device

Edit the user name of a paired phone.

Create a security PIN for a paired phone. Replace a previously paired phone with a

new phone.

Delete a previously paired phone.

Features

Delete All

Delete all the previously stored speed dial numbers.

Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.

Enter a phone number to store as a speed dial number.

(Existing

entry list)

Edit a previously stored speed dial number.

●

Change a number.

●

Create or delete a voice tag.

Delete a previously stored speed dial number.

Set calls to automatically transfer from your phone to HFL when you enter the vehicle.

Auto Transfer

Auto Answer

Ring Tone

Set whether to automatically answer an incoming call after about four seconds. Select the ring tone.

Use Contact Photo

Set phonebook data to be automatically imported when a phone is paired to HFL.

Display a caller’s picture on an incoming call screen.

Automatic Phone Sync

Enable Text/Email

Turn the text message/E-mail function on and off.

New Text/Email Alert

Select whether a pop-up alert comes on the screen when HFL receives a new text message/E-mail.

Edit Speed

Dial

New Entry

Manual Input

Import from

Call History

Import from

Phonebook

Edit

Delete

uuBluetooth® HandsFreeLink®uHFL Menus

Default

Cancel/Reset all customized items in the Phone Settings group as default.

Text/Email

*1: Appears only when a phone is connected to HFL.

Select Account

Select a mail or text message account.

Continued

271

uuBluetooth® HandsFreeLink®uHFL Menus

Features

■ Phone screen

1. Press the PHONE button.

2. Press the MENU button to display the

Dial

Enter a phone number to dial.

menu items.

Phonebook

Speed Dial

Display the paired phone’s phonebook.

New Entry

(Existing entry list)

More Speed Dials

*1: Appears only when a phone is connected to HFL.

272

Manual Input

Import from

Call History

Import from

Phonebook

Enter a phone number to store as a speed dial number. Select a phone number from the call history to store as a speed dial number. Select a phone number from the phonebook to store as a speed dial number.

Dial the selected number in the speed dial list.

Display another paired phone’s speed dial list.

Features

See the next message.

System reads received message aloud, or stop message from being read.

Call

Reply to a received message using one of six fixed phrases.

Make a call to the sender.

Redial

Call History

Text/Email

Redial the last number dialed in the phone’s history.

All

Dialed

Received

Missed

Display the last 20 outgoing, incoming and missed calls. Display the last 20 outgoing calls. Display the last 20 incoming calls. Display the last 20 missed calls.

(Read/Stop)

Select a message and press .

Message is

read aloud.

uuBluetooth® HandsFreeLink®uHFL Menus

See the previous message.

*1: Appears only when a phone is connected to HFL.

Select Account

Select a mail or text message account.

Continued

273

Features

1Phone Setup

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips:

• You cannot pair your phone while the vehicle is

moving.

• Up to six phones can be paired.

• Your phone’s battery may drain faster when it is

connected to HFL.

• If your phone is not ready for pairing or not found

by the system within three minutes, the system will time out and returns to idle.

Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side. These icons indicate the following:

: The phone can be used with HFL. : The phone is compatible with Bluetooth® Audio.

When pairing is completed, an Automatic Phone Sync prompt appears. Select On if you want your call history and phonebook automatically imported to HFL.

2 Changing the Automatic Phone Sync

setting P. 284

uuBluetooth® HandsFreeLink®uHFL Menus

Phone Setup

■

274

■ To pair a cell phone (when there is no

phone paired to the system)

1. Press the PHONE button.

2. Rotate to select Yes, then press .

3. Make sure your phone is search or

discoverable mode, then press .

u HFL automatically searches for a

Bluetooth device.

4. When your phone appears on the list, select

it by pressing .

u If your phone does not appear, you can

select Refresh to search again.

u If your phone still does not appear, move

to select Phone not Found? and

search for Bluetooth devices using your phone. From your phone, select

HandsFreeLink.

5. HFL gives you a pairing code on the audio/

information screen.

u Confirm if the pairing code on the screen

and your phone match. This may vary by phone.

6. You will receive a notification on the screen

if pairing is successful.

Features

uuBluetooth® HandsFreeLink®uHFL Menus

■ To pair a cell phone (when a phone has

already been paired to the system)

1. Press the SETTINGS button.

2. Rotate to select Phone Settings, then

press .

u Repeat the procedure to select Connect

phone, then Add Bluetooth Device.

3. Make sure your phone is in search or

discoverable mode, then press .

u HFL automatically searches for a

Bluetooth device.

4. When your phone appears on the list, select

it by pressing .

u If your phone does not appear, you can

select Refresh to search again.

u If your phone still does not appear, move

to select Phone not Found? and

search for Bluetooth devices using your phone. From your phone, select

HandsFreeLink.

5. HFL gives you a pairing code on the audio/

information screen.

u Confirm if the pairing code on the screen

and your phone match. This may vary by phone.

6. You will receive a notification on the screen

if pairing is successful.

Continued

275

Features

1To change the pairing code setting

The pairing code may be six or four digits depending on your phone.

The default pairing code is 0000 until you change the setting. To create your own, select Fixed, and delete the current code, then enter a new one.

For a randomly generated pairing code each time you pair a phone, select Random.

uuBluetooth® HandsFreeLink®uHFL Menus

■ To change the pairing code setting

1. Press the SETTINGS button.

2. Rotate to select System Settings, then

press .

u Repeat the procedure to select Edit

Pairing Code.

3. Rotate to select Fixed or Random,

then press .

276

Features

1To replace an already-paired phone with a new phone

The replaced phone will keep the same speed dial entries, and security PIN information from the previously paired phone.

uuBluetooth® HandsFreeLink®uHFL Menus

■ To replace an already-paired phone

with a new phone

1. Press the SETTINGS button.

2. Rotate to select Phone Settings, then

press .

u Repeat the procedure to select

Bluetooth Device List.

3. Rotate to select a paired phone you

want to replace, then press .

4. Rotate to select Replace This Device,

then press .

5. HFL enters the pairing process and searches

a new phone.

u Follow the prompts to pair a new phone.

6. You will receive a notification on the screen

if pairing is successful.

Continued

277

Features

uuBluetooth® HandsFreeLink®uHFL Menus

■ To delete a paired phone

1. Press the SETTINGS button.

2. Rotate to select Phone Settings, then

press .

u Repeat the procedure to select

Bluetooth Device List.

3. Rotate to select a phone you want to

delete, then press .

4. Rotate to select Delete This Device,

then press .

5. You will receive a confirmation message on the screen. Rotate to select Yes, then press .

6. You will receive a notification on the screen if it is successful.

278

+ 222 hidden pages