Johnson Controls VA9203-GGx-2Z, VA9203-AGx-2Z, VA9203-Bxx-2 Specifications

Figure 1: VA9203 Spring Return Electric Valve

Actuator

VA9203-xxx-xx Series Electric Spring Return Valve Actuators

Product Bulletin

VA9203-GGx-2Z, VA9203-AGx-2Z, VA9203-Bxx-2

The VA9203-xxx-xx Series Electric Spring Return Valve Actuators are direct-mount valve actuators. These bidirectional actuators are used to provide accurate positioning on Johnson Controls® VG1000 Series 1/2, 3/4, and 1 in. (DN15, DN20, and DN25) ball valves in Heating, Ventilating, and Air Conditioning (HVAC) applications. A mechanical spring return system provides rated torque with or without power applied to the actuator. The series includes the following control options:

• On/Off, 24 V, or 85 to 264 VAC power

• On/Off and Floating Point, 24 V power

• Proportional, 24 V power, for 0(2) to 10 VDC or 0(4) to 20 mA Control Signal

An accessory crankarm and remote mounting kit are available for applications where the actuator cannot be direct-coupled to the damper shaft. An optional line voltage auxiliary switch indicates an end-stop position or performs switching functions within the selected rotation range.

Code No. LIT-12011702

Issued May 2018

Table 1: Features and Benefits (Part 1 of 2)

Features Benefits

Direct Mounting with a Single Screw Reduces installation time and cost.

Electronic Stall Detection Protects from overload at all angles of rotation. Power consumption is

reduced holding mode. The actuator may be stalled anywhere in its rotation range without the need for mechanical end switches.

Double-Insulated Construction Eliminates need for electrical ground connection for regulatory agency

Microprocessor-Controlled Brushless DC Motor (-AGx and -GGx Models)

External Mode Selection Switch (-AGx and -GGx Models)

Integral Cables with Colored and Numbered Conductors

Integral 1/2 in. (13 mm) Threaded Conduit Connector(s)

Optional Integrated Auxiliary Switch Provides adjustable switch point with line voltage capability.

Plenum Rated Models Enable use in other environmental air spaces (plenums) in accordance

compliance.

Provides constant runtime independent of torque and ensures long life.

Permits control logic reversal for Floating Control (-AGx Models). Permits calibration input signal range selection, and control logic reversal for Proportional Control (-GGx Models).

Simplify installation and field wiring.

with section 300.22(C) of the National Electric Code.

VA9203-xxx-xx Series Electric Spring Return Valve Actuators Product

Bulletin

Table 1: Features and Benefits (Part 2 of 2)

Features Benefits

Optional Thermal Barrier Provides for 284°F (140°C) hot water or 15 psi saturated steam

applications.

Available Weather Shield for Field Mounting Provides NEMA 3R protection for the actuator.

Override Control (Proportional Models Only) Supports manual control system override application through field wiring.

Underwriters Laboratories Inc.® (UL), CE Mark, and C-Tick Compliance

Manufactured under International Standards Organization (ISO) 9001 Quality Control Standards

5-Year Warranty Protects consumer investment.

Provides internationally recognized regulatory agency approvals.

Ensures quality.

IMPORTANT: Use these VA9203-xxx-xx Series Electric Spring Return Actuators only to control equipment under normal operating conditions. Where failure or malfunction of the electric actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the electric actuator.

VA9203-GGx-2Z Series Proportional Actuators

The VA9203-GGx-2Z Series Actuators provide proportional modulation of VG1000 1/2, 3/4, and 1 inch ball valves in HVAC systems that are controlled by an electronic controller or positioner. The actuator responds to 0 to 10 VDC or 2 to 10 VDC control signals. With the addition of a 500 ohm resistor, the actuator responds to a 0 to 20 mA or 4 to 20 mA signal. A 0 to 10 VDC or 2 to 10 VDC feedback signal indicates position and provides support for master-subordinate applications.

Manual control system override applications are supported through field wiring, and include:

• override to MIN position

• override to MAX position

• override to MIN, MID, and MAX position

The VA9203-GGA-2Z actuators include plenum-rated cables and are specially configured for installation in spaces used for environmental air-handling purposes, other than ducts and plenums, as specified in National Fire Protection Association (NFPA) 70: National Electrical Code section 300.22(C), Other Space Used for Environmental Air. The space over a hung ceiling, when used for environmental air handling purposes, is an example of the type of space for which these actuators are configured.

VA9203-AGx-2Z Series On/Off and Floating Point Actuators

The VA9203-AGx-2Z Series Actuators provide on/off control or modulation of VG1000 1/2, 3/4, and 1 inch ball valves in HVAC systems. Floating point control can be provided from a triac or relay. On/off control can be provided from a manual switch, controller, auxiliary switch from a fan motor contactor, or similar device.

The VA9203-AGA-2Z actuators include plenum-rated cables and are specially configured for installation in spaces used for environmental air-handling purposes other than ducts and plenums as specified in National Fire Protection Association (NFPA) 70: National Electrical Code section 300.22(C), Other Space Used for Environmental Air. The space over a hung ceiling, when used for environmental air handling purposes, is an example of the type of space for which these actuators are configured.

VA9203-xxx-xx Series Electric Spring Return Valve Actuators Product Bulletin

VA9203-Bxx-2 Series On/Off Actuators

The VA9203-Bxx-2 Series Actuators provide on/off control of VG1000 1/2, 3/4, and 1 inch ball valves in HVAC systems. On/off control can be provided from a manual switch, controller, auxiliary switch from a fan motor contactor, or similar device.

Operation

VA9203-xxx-xx Series Actuators provide 95º of rotation. A graduated scale from 0% to 100% and a position indicator provide visual indication of stroke. When power fails during service, the mechanical spring return system returns the valve to the home position.

VA9203-GGx-2Z Series Proportional Actuators

The VA9203-GGx-2Z Series uses a brushless DC motor controlled by a microprocessor. The microprocessor drives the motor at constant speed, independent of torque. The microprocessor also monitors the brushless DC motor’s rotation to prevent damage to the actuator in a stall condition. The actuator can be stalled anywhere within its rotation range without the need for mechanical end switches. Power consumption is reduced in the holding mode.

The VA9203-GGC-2Z version is provided with one integrated, line-voltage-capable auxiliary Single-Pole, Double-Throw (SPDT) switch. The switch point is independently and continuously adjustable throughout the full range of actuator stroke. The auxiliary switch is double-insulated so an electrical ground is not required.

VA9203-AGx-2Z Series On/Off and Floating Point Actuators

The VA9203-AGx-2Z Series uses a brushless DC motor controlled by a microprocessor. The microprocessor drives the motor at constant speed, independent of torque. The microprocessor also monitors the brushless DC motor’s rotation to prevent damage to the actuator in a stall condition. The actuator can be stalled anywhere within its rotation range without the need for mechanical end switches. Power consumption is reduced in the holding mode.

The VA9203-AGB-2Z version is provided with one integrated, line-voltage-capable auxiliary SPDT switch. The switch point is independently and continuously adjustable throughout the full range of actuator stroke. The auxiliary switch is double-insulated so an electrical ground is not required.

VA9203-Bxx-2 Series On/Off Actuators

The VA9203-Bxx-2 Series uses a DC brush motor controlled by analog electronics. The actuator can be stalled anywhere within its rotation range without the need for mechanical end switches. Power consumption is reduced in the holding mode. Two different voltage ratings are available for on/off actuators.

• VA9203-BGx-2: AC 24 V 50/60 Hz or DC 24 V power

• VA9203-BUx-2: AC 85 to 265 V 50/60 Hz power

The VA9203-BUx-2 actuators are double-insulated so an electrical ground is not required. The VA9203-BxB-2 versions are provided with one integrated, line-voltage-capable auxiliary SPDT switch. The switch point is independently and continuously adjustable throughout the full range of the actuator stroke. The auxiliary switch is double-insulated so an electrical ground is not required.

VA9203-xxx-xx Series Electric Spring Return Valve Actuators Product Bulletin

Wiring Diagrams

(+)

COM

BLK

RED

GRY

ORN

(+)

COM

BLK

RED

GRY

ORN

0(4)...20 mA

DC 0(2)...10 V Control

0(4)...20 mA Control with

External Resistor

AC/DC

24 V

DC 0(2)...10 V

AC/DC

24 V

DC 0(2)...10 V

Master-Subordinate Application

DC 0(2)...10 V

BLK

RED

GRY

ORN

AC/DC

24 v

(+)

DC 0(2)...10 V

COM

BLK

RED

GRY

ORN

500 / 0.25 W

Figure 2: VA9203-GGx-2Z Control Wiring

Diagrams

Figure 3: Control Wiring Diagrams (Overrides)

VA9203-GGx-2Z Series Proportional Actuators

VA9203-xxx-xx Series Electric Spring Return Valve Actuators Product Bulletin

+ 9 hidden pages