Johnson Controls VA-3100 Series Catalog Page

VA-3100 Series
Electric Valve Actuator
VA-3100 Series Electric Valve Actuators
Code No. LIT-1900065 Issued January 2, 2014
Description
VA-3100 Series Electric Valve Actuators use a synchronous motor to accurately position Johnson Controls® VG2000 Series Cast Iron Flanged Globe Valves in HVAC and industrial applications. These non-spring-return electric actuators have a 675 lb (3,000 N) force output for on/off (floating) or proportional control. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions. Position feedback is also available through an isolated 2,000 ohm potentiometer. All models feature a manual hand crank for manual positioning of the valve, independent of a power supply.
Refer to the VA-3100 Series Electric Valve Actuators Product Bulletin (LIT-977283) for important product application information.
Features
• synchronous motor with pressure switches
• provides a constant running speed and establishes fixed closeoff forces
• two-bolt coupler clamp provides quick and easy coupling of the actuator to the valve stem
• on/off (floating) or proportional control allows optimal choice of control signal
• adjustable starting point, span, and action (proportional control model only) provides application flexibility and allows for easy sequencing from only one output signal
• 0 to 10 VDC position feedback signal (proportional control model only) provides accurate valve position indication in response to an input signal up to 10 VDC
• auxiliary switches and feedback potentiometer available on select models provide independent verification of actuator position
• manual hand crank allows for manual positioning of the valve, independent of a power supply
Selection Chart
Description Actuator Model
VA-3100­AGA
On/Off (Floating) Control — Proportional Control Feedback:
2,000 Ohm Potentiometer Two Auxiliary Switches 
Stem and Valve Size:
M Stem (3/8 in.), 2-1/2 through 4 in. Valves
N Stem (1/2 in.), 5 and 6 in. Valves
VA-3100­AGC


VA-3100­HGC
Accessories
Code Number
VA-3100-101 Auxiliary Switch Cam Adjusting Wrench (Used on
VA-3100-500 Mounting Kit for Field Mounting VA-3100 Series
VA-3100-501 Mounting Kit for Field Mounting VA-3100 Series
1. lb x 0.454 = kg.
Description Ship.Wt.,
VA-3100 Series Elect r ic Actuators – One Wrench is Supplied with Each Actuator)
Electric Actuators to 2-1/2 through 4 in. VG2000 Series Cast Iron Flanged Globe Valves with 3/8 in. M Stem (Kit Includes One Stem Jam Nut, One Yoke Adaptor, One Packing Nut, One 2-1/4 in. Length Stem Ada ptor for 2-1/2 in . Valves, and One 2-1/2 in. Length Stem Adaptor for 3 and 4 in. Valves)
Electric Actuators to 5 and 6 in. VG2000 Series Cast Iron Flanged Globe Valves with 1/2 in. N Stem (Kit Includes One Stem Jam Nut, One Yoke Adaptor, One Packing Nut, and One Stem Adaptor)
lb
0.1
3.0
3.5
1
Repair Information
If the VA-3100 Series Electric Valve Actuator fails to operate within its specifications, replace the unit. For a replacement actuator, contact the nearest Johnson Controls representative.
Technical Specifications
VA-3100 Series Electric Valve Actuators
Force Output 675 lb (3,000 N) Power
Requirements
Input Signal On/Off (Floating)
Input Impedance Proportional
Feedback Signal VA-3100-AGC Only 0 to 2,000 Ohms
Switch Contact Rating 5 A, 24 VAC Maximum Stroke 1-21/32 in. (42 mm) Nominal Timing for 1 in. Stroke 92 Seconds Ambient Operating
Temperature Limits (Limited by the Actuator)
Agency Compliance UL 873 Listed, File E27734;
Enclosure Rating NEMA 3/3R, IP 54 Shipping Weight 9.7 lb (4.4 kg)
On/Off (Floating) Control Models
Proportional Control Models
Control Models Proportional
Control Models
Control Models Only
VA-3100-HGC Only Approximately 9 VDC Span
On/Off (Floating) Control Models
Proportional Control Models
20 to 28 VAC, 60 Hz; 16 VA Minimum
20 to 28 VAC, 60 Hz; 18 VA Minimum
20 to 28 VAC, 60 Hz
0 to 10 VDC
5,600 Ohms
(0.5 VDC with Valve Stem Fully Down; 9.5 VDC with Valve Stem Fully Up)
14 to 140°F (-10 to 60°C)
14 to 122°F (-10 to 50°C)
CSA C22.2 No. 139 Certified
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
1
www.johnsoncontrols.com
Loading...