Johnson Controls V-909x Series Data Sheet

Two-Way, Industrial-Grade,

Non-Spring-Return, V-909x Series

High-Pressure Pneumatically Actuated,

High-Pressure, High-Temperature

Butterfly Valve Assemblies

Butterfly Valves and Actuators

Code No. LIT-1900149

Two-Way, Industrial-Grade, Non-Spring-Return, V-909x Series High-Pressure
Pneumatically Actuated, High-Pressure, High-Temperature Butterfly Valve
Assemblies

Description

VF Series Two-Way, Industrial-Grade,
Non-Spring-Return, V-909x Series
High-Pressure Pneumatically Actuated,
High-Pressure, High-Temperature Butterfly
Valve Assemblies are specifically designed for
a wide range of HVAC applications, including
two-position and modulating/throttling control
of hot water, chilled water, condenser water,
and steam. Refer to the VF Series

High-Pressure, High-Temperature Butterfly
Valves for Steam Service Application Note

(LIT 977321) for more information on steam

applications. These lug-style valves offer
bidirectional shutoff at full-rated American
National Standards Institute (ANSI) Class 150
and 300 operating pressures, increasing the
range of applications—particularly in high-rise
building HVAC control applications. ANSI
Class 150 and 300 models are also suitable
for steam applications.

Refer to the VF Series High-Pressure,

High-Temperature Butterfly Valves Product

Bulletin (LIT-977208) for important product

application information.

Features

• compatible with all types of ANSI 150/300
slip-on and weld-neck flanges

• high-pressure, high-temperature design

• bidirectional shutoff, dead-end service

• live-loaded seat design with fully encased
O-ring

• double offset stem design

• broad range of compact pre-assembled
actuators available

• direct actuator-to-stem mounting

Repair Information

If the VF Series Butterfly Valve Assembly fails
to operate within its specifications, refer to the

VF Series High-Pressure, High-Temperature

Butterfly Valves Product Bulletin (LIT-977208)

for a list of repair parts available.

Actuators

Actuators

Actuators

Actuators

Pneumatic Damper

Pneumatic Damper

Buttery Valves and

Buttery Valves and

Selection Chart

Valve Code
Number

Two-Way, Normally Closed — ANSI Class 300 Flanges
VFC-025ZE 2-1/2 160 100 550 VFC-025ZE-030C VFC-025ZE-030B
VFC-030ZE 3 185 155 VFC-030ZE-030C VFC-030ZE-030B
VFC-040ZE 4 375 315 VFC-040ZE-040C VFC-040ZE-040B
VFC-050ZE 5 790 500 VFC-050ZE-042C VFC-050ZE-042B
VFC-060ZE 6 1,000 710 VFC-060ZE-050C VFC-060ZE-050B
VFC-080ZE 8 2,000 1,360 VFC-080ZE-060C VFC-080ZE-060B
VFC-100ZE 10 2,650 1,740 VFC-100ZE-070C VFC-100ZE-070B
VFC-120ZE 12 4,000 2,500 VFC-120ZE-070C VFC-120ZE-070B
VFC-140ZE 14 4,100 2,600 VFC-140ZE-080C VFC-140ZE-080B

Two-Way, Normally Closed — ANSI Class 150 Flanges
VFC-025VE 2-1/2 160 100 240 VFC-025VE-030C VFC-025VE-030B
VFC-030VE 3 185 155 VFC-030VE-030C VFC-030VE-030B
VFC-040VE 4 375 315 VFC-040VE-030C VFC-040VE-030B
VFC-050VE 5 790 500 VFC-050VE-042C VFC-050VE-042B
VFC-060VE 6 1,350 750 VFC-060VE-042C VFC-060VE-042B
VFC-080VE 8 2,800 1,590 VFC-080VE-050C VFC-080VE-050B
VFC-100VE 10 4,300 2,430 VFC-100VE-060C VFC-100VE-060B
VFC-120VE 12 6,650 3,750 VFC-120VE-070C VFC-120VE-070B
VFC-140VE 14 7,650 4,300 VFC-140VE-070C VFC-140VE-070B
VFC-160VE 16 9,800 5,510 VFC-160VE-080C VFC-160VE-080B

1. On/off assemblies come with 120 VAC solenoid valve and speed controls. If a 24 VAC solenoid is desired, change the C at the end of the code number to an E.

2. Maximum closeoff pressure for ANSI Class 300 valves is 740 psig (5,102.1 kPa) for fluid temperatures below 100°F (37.8°C), and 550 psig (3,790 kPa) for fluid
temperatures at 250°F (121.1°C). Maximum steam pressure is 150 psig (1,034.2 kPa) for on/off service, and 50 psig (344.8 kPa) for proportional service.

3. Maximum closeoff pressure for ANSI Class 150 valves is 285 psig (1,965 kPa) for fluid temperatures below 100°F (37.8°C), and 240 psig (1,654.8 kPa) for fluid
temperatures at 250°F (121.1°C). Maximum steam pressure is 150 psig (1,034.2 kPa) for on/off service, and 50 psig (344.8 kPa) for proportional service.

Actuator
Size, in. Cv at 90° Cv at 70° Closeoff

Pressure,
psig

2

3

On/Off

1

Proportional (with Positioner)

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

V–287

Two-Way, Industrial-Grade, Non-Spring-Return, V-909x Series High-Pressure
Pneumatically Actuated, High-Pressure, High-Temperature Butterfly Valve Assemblies
(Continued)

Technical Specifications

Service Hot, Chilled, or Condenser Water, and Steam
Body Styles and Sizes Two-Way, 2-1/2 through 16 in., Fully Lugged
Fluid Temperature Limits -20 to 500°F (-29 to 260°C)
Maximum Closeoff Pressure 2-1/2 through 16 in.

Actuators

Actuators

Pneumatic Damper

Buttery Valves and

Materials Body Carbon Steel, ASTM A216 GR WCB/A516 GR 70

Ambient Storage Temperature Limits -20 to 150°F (-29 to 66°C);

1. Refer to the VF Series High-Pressure, High-Temperature Butterfly Valves Product Bulletin (LIT-977208) for actuator specifications.

2. Types V and Z valves are rated for 150 psig (1,034 kPa) sat urated st eam at 366° F (186°C) for two-p osition a pplications, a nd 50 p sig (345 kPa) saturated steam
at 297°F (147°C) for modulating applications. Refer to the VF Series High-Pressure, High-Temperature Butterfly Valves for Steam Service Application Note
(LIT-977321) for more information.

3. For 18 in. or larger ANSI Class 150 valves and 16 in. or larger ANSI Class 300 valves, consult the local Johnson Controls® office.

4. The preferred orientation of the seat reta iner in dead-end service is against the flange.

5. For pressures between 550 and 740 psig (3,790 and 5,099 kPa), consult the local Johnson Controls office.

Butterfly Valves and Actuators

Two-Way, Industrial-Grade, Non-Spring-Return, V-909x Series High-Pressure Pneumatically Actuated,

High-Pressure, High-Temperature Butterfly Valve Assemblies

2

3

ANSI Class 150 Valves
(Type V)

2-1/2 through 14 in.
ANSI Class 300
Valves (Type Z)

Disk Stainless Steel, ASTM A 351 GR CF8M
Seat Assembly RTFE with Silicone Rubber O-Ring
Seat Retainer Carbon Steel, ASTM A516 GR 70
Stem 17-4 PH Stainless Steel, ASTM A564-Type 630

240 psig (1,654 kPa) at 250°F (121°C)
Fluid Temperature, Bidirectional

240 psig (1,654 kPa) at 250°F (121°C)
Fluid Temperature, Dead-End Service

550 psig (3,790 kPa) at 250°F (121°C)
Fluid Temperature, Bidirectional

550 psig (3,790 kPa) at 250°F (121°C)
Fluid Temperature, Dead-End Service

Preferably 40 to 85°F (4 to 29°C)

3

3, 4

3, 5

3, 4, 5

1

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.

V–288