Johnson Controls V46N Series Data Sheet

V46 Series Reverse Acting
Val ve
Valves and Valve Accessories
Code No. LIT-1927335
V46N Series Reverse Acting Valve
Description
The V46N Series are reverse acting pressure actuated modulating valves used on either open or closed loop coolant systems. Reverse acting valves open on a refrigerant pressure decrease. They are generally used in parallel with a direct acting valve for heat pump applications or for bypass operation.
Refer to the V46 Pressure-Actuated
Water-Regulating Product Bulletin
(LIT-125687) for important product
application information.
Selection Chart
Product Code Number
V46NA-1C 3/8 NPT Threaded 90 to 280 (621 to 1,931) 30 in. capillary with V46NA-4C 40 to 100 V46NB-1C 1/2 NPT 90 to 280 (621 to 1,931) STT15A-602R SEP91A-602R & SEC99AA-36C V46NB-2C 40 to 1003 (276 to 690) V46NC-1C 3/4 NPT 90 to 280 (621 to 1,931) STT16A-601R SEP91A-601R & SEC99AA-36C V46NC-2C 40 to 1003 (276 to 690) V46ND-1C 1 NPT 90 to 280 (621 to 1,931) STT17A-609R SEP91A-603R & SEC99AA-36C V46ND-2C 40 to 1003 (276 to 690) V46NE-1C 1-1/4 NPT 90 to 280 (621 to 1,931) STT17A-610R V46NE-2C 40 to 100
1. Refer to V46 Series Valve Sizing Information — 90% Open Method (LIT-1927400), and then specify the code number from this chart.
2. Maximum bellows overpressure is 320 psig (2,206 kPa). Replacement element provided with 1/4 in. external SAE connector. Or der SEC37A capillary kit with
3. For heat pump application.
1
two flare nuts, separately if needed. Use only on valves specified.
Pipe Size In.
Inlet and Outlet
Applications
• bypass systems
• water cooled heat pumps in parallel with direct acting valve
Repair Information
If the V46N Series Reverse Acting Valve fails to operate within its specifications, replace the unit. For a replacement valve, contact the nearest Johnson
Opening Point Range psig (kPa)
Commercial Type – Non-Corrosive Refrigerants (R)
3
(276 to 690)
3
(276 to 690)
Controls®
representative.
Pressure Element Style
1/4 in. flare nut + Schrader
Valve depressor (Style 45)
Seat Repair Kit Replacement
STT14A-600R SEP91A-600R & SEC99AA-36C
Power Elements
2
2
2
2
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.
R-154
Loading...