Johnson Controls V-3000 Series Catalog Page
Exposed V-3000-1 Actuator
Code No. LIT-1924055
Issued January 2, 2014
V-3000 Series Pneumatic Actuator
Description
The V-3000 Series Pneumatic Actuator can
position steam or water valve-modulating
plugs in response to a pneumatic signal from a
controller.
Refer to the V-3000 Pneumatic Valve Actuator
Exposed or Enclosed Product Bulletin
(LIT-977250) for important product application
information.
Applications
Used on 1/2 in. Flare Valves, VT Series
Valves, and 3/4 to 1-1/2 Cage Trim Valves.
This actuator is not used with VG7000 Series
Valves.
Repair Information
If the V-3000 Series Pneumatic Actuator fails
to operate within its specifications, replace the
unit. For a replacement actuator, contact the
Features
nearest Johnson Controls® representative.
• molded synthetic rubber diaphragm design
provides a constant effective area
throughout the valve stem stroke
• die-cast aluminum housing coated with
corrosion-resistant finish
• remove or reposition actuator by loosening
a single set screw
• easily field mounted to the valve bonnet
with a single set screw
• can be mounted to any of the V-3000,
V-4000, or VT Series Valves
(except V-3854)
Selection Chart
Code Number Description
V-3000-1 Exposed Yoke
Accessories
Code Number Description
V-3000-10 Valve Positi on Indicator
V-9502-15 Positioner Kit
1. Refer to the V-9502 Series Pneumatic Valve Actuator Positioners Product
Bulletin (LIT-977265) Catalog Page (LIT-1924100).
1
Technical Specifications
V-3000 Series Pneumatic Actuator
Media Temperatur e 281°F Maximum
Maximum Control
Pressure
Available Spring
Ranges
Air Connection 1/8 in. NPT Barbed Fitting for 5/32 in. O.D. Polytubing
Size, in. 3 H x 4-7/16 Diameter
1. A spring is assembled with the valve body, not in the actuator.
For spring kits to field mount V -30 00-1 to valve bo dies, refer t o the V al ve Spri ng
Kits Sorted by Valve Code Number Cat alog Page (LIT-1924395).
30 psig
1
3 to 6, 4 to 8, and 9 to 13 psig
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
1
Loading...