Johnson Controls TEC26x7-4 Series, TEC26x7-4+PIR Series Catalog Page

Code No. LIT-1900617

TEC26x7-4 and TEC26x7-4+PIR Series BACnet MS/TP Networked Thermostat

Controller with Two Outputs

Issued March 4, 2013

TEC26x7-4 and TEC26x7-4+PIR Series

BACnet® MS/TP Networked Thermostat Controllers with Two Outputs

Description

The TEC26x7-4 and TEC26x7-4+PIR Series Thermostat Controllers are BACnet® Master-Slave/Token-Passing (MS/TP) networked devices that provide control of local hydronic reheat valves, pressure dependent Variable Air Volume (VAV) equipment with or without local reheat, or other zoning equipment using an on/off, floating, or proportional 0 to 10 VDC control input. The technologically advanced TEC26x7-4 and TEC26x7-4+PIR Series Thermostat Controllers feature a Building Automation System (BAS) BACnet MS/TP communication capability that enables remote monitoring and programming for efficient space temperature control.

The TEC26x7-4 and TEC26x7-4+PIR Series Thermostat Controllers feature an intuitive user interface with backlit display that makes setup and operation quick and easy. The thermostat controllers also employ a unique, Proportional-Integral (PI) time-proportioning algorithm that virtually eliminates temperature offset associated with traditional, differential-based thermostat controllers.

Refer to the TEC26x7-4 and TEC26x7-4+PIR

Series BACnet MS/TP Networked Thermostats with Two Outputs Product Bulletin (LIT-12011584) for important product

application information.

Features

• BACnet MS/TP communication—provides compatibility with a proven communication network; BACnet MS/TP is widely accepted by Heating, Ventilating, and Air Conditioning (HVAC) control suppliers

• password protection option—protects against unwanted thermostat controller tampering

• backlit Liquid Crystal Display (LCD)—offers real-time control status of the environment in easy-to-read, English plain text messages with constant backlight that brightens during user interaction

• on/off, floating, or proportional 0 to 10 VDC control—offers additional application flexibility by providing more advanced control signals

• override interface key—allows easy access for temporarily overriding the unoccupied mode

• simplified setpoint adjustment—enables the user to change the setpoint by simply pressing the UP/DOWN arrow keys

• two configurable binary inputs—provide additional inputs for advanced functions such as remote night setback, service or filter alarms, motion detector, and window status

• over 20 configurable parameters—enable the thermostat to adapt to any application, allowing installer parameter access without opening the thermostat cover

• optional discharge air sensor—monitors unit efficiency

Repair Information

If a TEC26x7-4 or TEC26x7-4+PIR Series Thermostat Controller fails to operate within its specifications, replace the unit. For a replacement thermostat, contact the nearest Johnson Controls® representative.

Selection Chart

Code Number Control Outputs

TEC2627-4 Two On/Off or Floating TEC2647-4 Two Proportional 0 to 10 VDC TEC2627-4+PIR Two On/Off or Floating with Onboard Occupancy Sensor TEC2647-4+PIR Two Proportional 0-10 VDC with Onboard Occupancy Sensor

Accessories

Code Number Description

SEN-600-1 Remote Indoor Air Temperature Sensor TE-6361M-1

SEN-600-4 Remote Indoor Air Temperature Sensor with Occupancy Override and Light-Emitting Diode (LED) TE-636S-1 Strap-Mount Temperature Sensor MS-BACEOL-0 RS485 End-of-Line Terminator

1. Additional TE-636xx-x Series 10k ohm Johnson Controls Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2013 Johnson Controls, Inc.

Product Bulletin (LIT-2163 20) for more details.

Duct Mount Air Temperature Sensor

www.johnsoncontrols.com

1 of 2

TEC26x7-4 and TEC26x7-4+PIR Series BACnet® MS/TP Networked Thermostat

TEC26x7-4 Series Thermostat Controller Dimensions, in. (mm)

70.0ºF

Room Temp

(125)

3-3/8

(86)

(29)

FIG:dmnsns_26x7

Controllers with Two Outputs (Continued)

4-15/16

1-1/8

Technical Specifications

TEC26x7-4 and TEC26x7-4+PIR Series BACnet MS/TP Networked Thermostat Controllers with Two Outputs

Power Requirements 19 to 30 VAC, 50/60 Hz, 2 VA (Terminals 4 and 5) at 24 VAC Nominal,

Relay/Triac Contact Rating

Analog Output Rating Proportional Control 0 to 10 VDC into 2k ohm Resistance (Minimum) Auxiliary Output Rating Triac Output 19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A In-Rush Digital Inputs Voltage-Free Contacts across Terminal Scom to Terminals BI1, BI2, or UI3 Analog Inputs Resistive Inputs (RS and UI3) for 10k ohm Johnson Controls Type II Negative Temperature

Temperature Sensor Type Local 10k ohm Negative Temperature Coefficient (NTC) Thermistor Wire Size 18 AWG (1.0 mm Diameter) Maximum, 22 AWG (0 .6 mm Diameter) Recommended MS/TP Network Guidelines 32 Devices Maximum; 4,000 ft (1,219 m) Maximum Cable Length Temperature Range Backlit Display -40.0°F/-40.0°C to 122.0°F/50.0°C in 0.5° Increments

Accuracy ±0.9F°/±0.5C° at 70.0°F/21.0°C Typical Calibrated Minimum Deadband 2F°/1C° between Heating and Cooling Ambient Conditions Operating 32 to 122°F (0 to 50°C); 95% RH Maximum, Noncondensing

Compliance United States UL Listed, File E27734, CCN XAPX,

On/Off and Floating Control 19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A I n-Rush, Class 2 or SELV

Heating Control 40.0°F/4.5°C to 90.0°F/32.0°C Cooling Control 54.0°F/12.0°C to 100.0°F/38.0°C

Storage -22 to 122°F (-30 to 50°C); 95% RH Maximum, Noncondensing

Canada UL Listed, File E27734, CCN XAPX7,

Europe CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the essential

Shipping Weight TEC26x7-4 0.75 lb (0.34 kg)

Australia and New Zealand C-Tick Mark, Australia/NZ Emissions Compliant BACnet International BACnet Testing Laboratories™ (BTL) 135-2001 Listed BACnet Applicati on Specific Controller

TEC26x7-4+PIR 0.77 lb (0.35 kg)

Class 2 or Safety Extra-Low Voltage (SELV)

Coefficient (NTC) Thermistor Sensors

Under UL 873, Temperature Indicating and Regulating Equipment FCC Compliant to CFR 47, Part 15, Subpart B, Class A

Under CAN/CSA C22.2 No. 24, TemperatureIndicating and Regulating Equipment Industry Canada, ICES-003

requirements and other relevant provisions of the EMC Directive 2004/108/EC and the RTTE Directive 1999/5/EC.

(B-ASC)

www.johnsoncontrols.com

2 of 2