Johnson Controls TEC2613-4, TEC2613-4+PIR Catalog Page

Code No. LIT-1900690

TEC2613-4 and TEC2613-4+PIR BACnet MS/TP Network

Temperature and Humidity Controllers

Issued May 13, 2011

TEC2613-4 and TEC2613-4+PIR

BACnet® MS/TP Network Multi-Stage Temperature and Humidity
Controllers

Description

The TEC2613-4 and TEC2613-4+PIR Temperature and Humidity
Controllers are BACnet® Master-Slave/Token-Passing (MS/TP)
network devices that provide control of multi-stage heating and cooling
equipment, such as rooftop or self-contained units with a humidifier
and/or dehumidifier.

The TEC2613-4+PIR Controller has Passive Infrared (PIR) occupancy
sensing capability built into the device. This controller maximizes
energy savings in high-energy usage light commercial buildings, such
as schools and hotels, during occupied times by using additional
setpoint strategies.

The TEC2613-4 and TEC2613-4+PIR Controllers provide exceptional
temperature control in an easy-to-use and flexible package. Both
models have over 20 configurable parameters, enabling the controllers
to adapt to a variety of applications. The controllers also employ an
embedded complete humidity solution with a unique,
Proportional-Integral (PI) time-proportioning algorithm that virtually
eliminates temperature offset associated with traditional,
differential-based controllers.

Refer to the TEC2613-4 and TEC2613-4+PIR BACnet MS/TP Network

Multi-Stage Temperature and Humidity Controllers Product Bulletin
(LIT-12011692) for important product application information.

Features

• embedded humidification sequence (0 to 10 VDC output) and
dehumidification sequence (dry contact) — simplifies installation
and reduces installation costs

• onboard occupancy sensor (PIR Model) — provides energy savings
without additional installation time and cost

• password protection option — protects against unwanted controller
tampering

• backlit Liquid Crystal Display (LCD) — offers real-time control status
of the environment in easy-to-read, English plain text messages
with constant backlight that brightens during user interaction

• simplified setpoint adjustment — enables the user to change the
setpoint by simply pressing the UP/DOWN arrow keys

• five easy-to-use interface keys — allow for easy commissioning and
adjustment of the controller, and eliminate the need for
DIP switches

• three Light-Emitting Diodes (LEDs) — provide fan, heating, and
cooling status at a glance

• one configurable digital input — provides additional input for
advanced functions such as remote night setback, occupancy
override, and service or filter alarms

• over 20 configurable parameters — enable the controller to adapt to
any application, allowing the installer parameter access without
opening the cover

• configurable auxiliary output — provides 24 VAC control for exhaust
fans, lighting, and other auxiliary functions

Repair Information

If either the TEC2613-4 or TEC2613-4+PIR Temperature and Humidity
Controller fails to operate within its specifications, replace the unit. For
a replacement controller, contact the nearest Johnson Controls®
representative.

Selection Chart

Code Number Description Applications

TEC2613-4 Multi-Stage Temperature and Humidity Controller Multi-Stage Packaged Heating/Cooling Equipment with
TEC2613-4+PIR Multi-Stage Temperature and Humidity Controller with Onboard Occupancy Sensor

Accessories

Code Number Description

Hx-67 Series
TE-6361M-1
TE-636S-1

MS-BACEOL-0 RS485 End-of-Line Terminator
TE-6363P-1
TEC-3-PIR

1. The humidity sensor must have a 0 to 10 VDC output. Remote wall-mounted versions may be used for remote return or room air hu midity sensing, with the
sensor mounted on the wall. A remote duct-mounted humidity sen sor may be used for re mote return air humid ity sensing, wit h the sensor mounted on the return
air duct or as a supply air humidity sensor used as a high limit protection.

2. Additional TE-636xx-x Series 10k ohm Johnson Controls® Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors Product
Bulletin (LIT-216320) for more details.

3. The TEC-3-PIR Accessory Cover can be used to replace the existing cover on a non-PIR TEC2613-4 Temperature and Humidity Controller to provide
occupancy sensing capability.

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.

1

Duct- or Wall-Mount Humidity Sensor

2

2

2

3

Duct-Mount Air Temperature Sensor
Strap-Mount Temperature Sensor

Outside Air Temperature Sensor
Cover with Occupancy Sensor

Humidifier and/or Dehumidifier

www.johnsoncontrols.com

1 of 2

TEC2613-4 and TEC2613-4+PIR BACnet® MS/TP Network Multi-Stage Temperature and

4-15/16

(125)

3-3/8

(86)

1-1/8

(29)

4-15/16

(125)

3-3/8

(86)

1-3/8

(36)

FIG:dmnsns

27.0 %RH

70.0 °F

27.0 %RH

70.0 °F

TEC2613-4 (Left) and TEC2613-4+PIR (Right)

Controller Dimensions, in. (mm)

Humidity Controllers (Continued)

Technical Specifications

TEC2613-4 and TEC2613-4+PIR BACnet MS/TP Network Multi-Stage Temperature and Humidity Controllers

Power Requirements 19 to 30 VAC, 50/60 Hz, 2 VA (Terminals RC and C) at 24 VAC Nominal, Class 2 or Safety Extra-Low Voltage

Relay Contact Rating (Y1, Y2, G, W1, W2, AUX,
and DEHUM)

Digital Input Voltage-Free Cont act across Terminals C and DI
Humidification Analog Output Rating 0 to 10 VDC Half-Wave Power Supply into 2k ohm Resistance Minimum
Wire Size 18 AWG (1.0 mm Diameter) Maximum, 22 AWG (0. 6 mm Diameter) Recommended
Temperature Sensor Type Local 10k ohm Johnson Controls Type II Negative Temperature Coefficient (NTC) Thermistor Sensor
Temperature Range Backlit Display -40.0°F/-40.0°C to 122.0°F/ 50.0°C in 0.5° Increments

Heating Control 40.0°F/4.5°C to 90.0°F/32.0°C
Cooling Control 54.0°F/12.0°C to 100.0°F/38.0°C

Accuracy Temperature ±0.9F°/±0.5C° at 70.0°F/21.0°C Ty pical Calibrated

Humidity ±5% RH from 30 to 70% RH at 50 to 90°F (10 to 32°C)
Minimum Deadband 2F°/1C° between Heating and Cooling
Ambient Conditions Operating 32 to 122°F (0 to 50°C); 95% RH Maximum, Noncondensing

Storage -22 to 122°F (-30 to 50°C); 95% RH Maximum, Noncondensing
Compliance BACnet

International

United States UL Listed, File E27734, CCN XAPX, Under UL 873, Temperatur eIndicating and Regulating Equipment

Canada UL Listed, File E27734, CCN XAPX7,

Shipping Weight TEC2613-4 Model: 0.75 lb (0.34 kg)

Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements

Australia and New

Zealand

(SELV)
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A Inrush, Class 2 or SELV

BACnet Testing Laboratories™ (BTL) 135-2001 Listed BACnet Application Specific Controller (B-ASC)

FCC Compliant to CFR 47, Part 15, Subpart B, Class A

Under CAN/CSA C22.2 No. 24, TemperatureIndicating and Regulating Equipment
Industry Canada, ICES-003

and other relevant provisions of the EMC Directive 2004/108/EC.
C-Tick Mark, Australia/NZ Emissions Compliant

TEC2613-4+PIR Model: 0.77 lb (0.35 kg)

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.

2 of 2

www.johnsoncontrols.com