Johnson Controls TEC22x6(H)-4 Series, TEC22x6H-4+PIR Series Catalog Page

TEC22x6(H)-4 and TEC22x6H-4+PIR Series

TEC22x6-4 Series

Thermostat Controller

TEC22x6H-4+PIR Series

Thermostat Controller

Code No. LIT-1900632
Issued February 8, 2010

LONW

ORKS

® Network Thermostat Controllers with Dehumidification

Capability, Fan Control, and Occupancy Sensing Capability

Description

The TEC22x6(H)-4 and TEC22x6H-4+PIR
Series Thermostat Controllers are

ONWORKS® network devices that provide

L
control of two- or four-pipe fan coils, cabinet
unit heaters, or other equipment using on/off,
floating, or proportional 0 to 10 VDC control
input, three speeds of fan control, and
dehumidification capability. The
TEC22x6H-4+PIR Series Thermostat
Controllers have occupancy sensing capability
built into the device. These devices maximize
up to 30% energy savings in high-energy
usage light commercial buildings, such as
schools and hotels, during occupied times by
using additional standby setpoints.

The technologically advanced TEC22x6(H)-4
and TEC22x6H-4+PIR Series Thermostat
Controllers feature a Building Automation
System (BAS) L
communication capability that enables remote
monitoring and programming for efficient
space temperature control. Specific models
are available to accommodate commercial and
hospitality applications.

The TEC22x6(H)-4 and TEC22x6H-4+PIR
Series Thermostat Controllers feature an
intuitive User Interface (UI) with backlit display
that makes setup and operation quick and
easy. The thermostat controllers also employ a
unique, Proportional-Integral (PI)
time-proportioning algorithm that virtually
eliminates temperature offset associated with
traditional, differential-based thermostat
controllers.

Refer to the TEC22x6(H)-4 and

TEC22x6H-4+PIR Series L
Network Thermostat Controllers with
Dehumidification Capability, Fan Control, and
Occupancy Sensing Capability Product
Bulletin (LIT-12011607) for important product

application information.

ONWORKS Network

ONWORKS®

Features

•LONWORKS network communication —
provides compatibility with a proven
communication network; L
network is widely accepted by Heating,
Ventilating, and Air Conditioning (HVAC)
control suppliers

• onboard occupancy sensor (Passive
Infrared [PIR] Models) — provides energy
savings without additional installation time
and cost

• password protection option — protects
against unwanted thermostat controller
tampering

• integral humidity sensing capability
(dehumidification models) — increases
occupancy comfort by providing
dehumidification

• backlit Liquid Crystal Display (LCD) —
offers real-time control status of the
environment in easy-to-read, English plain
text messages with constant backlight that
brightens during user interaction

• on/off, floating, or proportional 0 to 10 VDC
control — offers additional application
flexibility by providing more advanced
control signals

• three speeds of fan control — provide easy
FAN speed selection via the interface key,
to meet the application requirements

ONWORKS

Selection Chart

Thermostat Controller Models (Part 1 of 2)

Code Number Control Outputs Onboard

Occupancy
Sensor

TEC2216-4 Two On/Off No No Commercial Market
TEC2216H-4 Two On/Off No No Hospitality Market
TEC2216H-4+PIR Two On/Off Yes No Hospitality Market
TEC2226-4 Two On/Off or Floating No No Commercial Market
TEC2226H-4 Two On/Off or Floating No No Hospitality Market
TEC2226H-4+PIR Two On/Off or Float ing Yes No Hospitality Market
TEC2236-4 Two On/Off or Floating No Yes Commercial Market

Dehumidification
Capability

• single/dual setpoint adjustment — enables
user setpoint options to accommodate
application

• override interface key (commercial models)
— allows easy access for temporarily
overriding the unoccupied mode

• temperature scale selector (hospitality
models) — offers guests the ability to select
a Fahrenheit (°F) or Celsius (°C)
temperature scale display

• two configurable binary inputs — provide
additional inputs for advanced functions
such as remote night setback, service or
filter alarms, motion detector, and window
status

• over 20 configurable parameters — enable
the thermostat to adapt to any application,
allowing installer parameter access without
opening the thermostat cover

• optional discharge air sensor — monitors
unit efficiency

Repair Information

If a TEC22x6(H)-4 or TEC22x6H-4+PIR
Series Thermostat fails to operate within its
specifications, replace the unit. For a
replacement thermostat, contact the nearest
Johnson Controls® representative.

Application

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

1 of 3

www.johnsoncontrols.com

TEC22x6(H)-4 and TEC22x6H-4+PIR Series LONWORKS® Network Thermostat

Thermostat Controller Dimensions, in. (mm) (TEC22x6(H)-4 and TEC22x6H-4+PIR Models Shown)

4-15/16

(125)

3-3/8

(86)

1-1/8

(29)

(125)

(86)

(36)

70.0ºF

Room Temp

Room Temp

°C

°F

Controllers with Dehumidification Capability, Fan Control, and Occupancy Sensing
Capability (Continued)

Thermostat Controller Models (Part 2 of 2)

Code Number Control Outputs Onboard

Occupancy
Sensor

TEC2236H-4 Two On/Off or Floating No Yes Hospitality Market
TEC2236H-4+PIR Two On/Off or Floating Yes Yes Hospitality Market
TEC2246-4 Two Proportional 0 to 10 VDC No No Commercial Market
TEC2246H-4 Two Proportional 0 to 10 VDC No No Hospitality Market
TEC2246H-4+PIR Two Proportional 0 to 10 VDC Yes No Hospitality Market
TEC2256-4 Two Proportional 0 to 10 VDC No Y es Commercial Market
TEC2256H-4 Two Proportional 0 to 10 VDC No Yes Hospitality Market
TEC2256H-4+PIR Two Proportional 0 to 10 VDC Yes Yes Hospitality Market

Dehumidification
Capability

Application

4-15/16

70.0ºF

°C

°F

3-3/8

1-3/8

FIG:dmnsns_tec22x6

Accessories (Order Separately)

Code Number Description

SEN-600-1 Remote Indoor Air Temperature Sensor
TE-6361M-1

SEN-600-4 Remote Indoor Air Temperature Sensor with Occupancy Override and LED
TE-636S-1 Strap-Mount Temperature Sensor

TEC-6-PIR
TEC-6H-PIR

1. Additional TE-636xx-x Series 10k ohm Johnson Controls Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors Product

2. The TEC-6-PIR and TEC-6H-PIR Accessory Covers can be used to replace the existing cover on a non-PIR TEC22x6(H)-4 Series Thermostat Controller to

1

2

2

Bulletin (LIT-216320) for more details.
provide occupancy sensing capability.

Duct Mount Air Temperature Sensor

Commercial Fan Coil Cover with Occupancy Sensor
Hospitality Fan Coil Controller Cover with Occupancy Sensor

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

2 of 3

www.johnsoncontrols.com