Johnson Controls TEC226x-4(+PIR) Series, TEC220x-4(+PIR) Series Catalog Page

TEC226x-4(+PIR) and TEC220x-4(+PIR) Series

TEC22xx-4+PIR Series

L

ONWORKS Network

Staged Thermostat Controller

Code No. LIT-1900631
Issued February 8, 2010

LONW

ORKS

® Network Staged Thermostat Controllers

Description

The TEC226x-4(+PIR) Series Programmable
and TEC220x-4(+PIR) Series
Non-Programmable L
Configurable Staged Thermostat Controllers
provide control of rooftop units (with and
without economizers), heat pumps, and
single- and multi-stage heating/cooling
equipment. The TEC226x-4+PIR and
TEC220x-4+PIR Series Thermostat
Controllers have occupancy sensing capability
built into the device. These devices provide
energy savings in high-energy usage light
commercial buildings such as schools and
hotels. The devices maximize these energy
savings by using additional setpoint strategies
during occupied times.

The technologically advanced
TEC226x-4(+PIR) and TEC220x-4(+PIR)
Series Thermostat Controllers feature a
Building Automation System (BAS)

ONWORKS Network communication capability

L
that enables remote monitoring and
programming for efficient space temperature
control.

The TEC226x-4(+PIR) and TEC220x-4(+PIR)
Series Thermostat Controllers use an intuitive,
plain text, menu-driven, backlit display that
makes setup and operation quick and easy.

The TEC220x-4+PIR and TEC226x-4+PIR
Series includes four models, each include the
option of a PIR occupancy sensing cover:

• Single-stage (TEC22x1-4 and
TEC22x1-4+PIR)

• Heat Pump (TEC22x2-4 and
TEC22x2-4+PIR)

• Multi-stage (TEC22x3-4 and
TEC22x3-4+PIR)

• Economizer (TEC22x4-4 and
TEC22x4-4+PIR)

All thermostat controllers use a unique,
Proportional-Integral (PI) time-proportioning
control algorithm that virtually eliminates
temperature offset associated with traditional
differential-based thermostat controllers

ONWORKS® Network

Refer to the TEC226x-4(+PIR) and

TEC220x-4(+PIR) Series L
Thermostat Controllers Product Bulletin
(LIT-12011606) for important product

application information.

ONWORKS Network

Features

•LONWORKS network communication —
provides compatibility with a proven
communication network; L
Network is widely accepted by Heating,
Ventilating, and Air Conditioning (HVAC)
control suppliers

• onboard occupancy sensor (Passive
Infrared [PIR] models) — provides energy
savings without additional installation time
and cost

• password protection option — protects
against unwanted thermostat controller
tampering

• backlit Liquid Crystal Display (LCD) —
offers real-time control status of the
environment in easy-to-read, English text
messages with constant backlight that
brightens during user interaction

• simplified setpoint adjustment — enables
the user to change the setpoint by simply
pressing the UP/DOWN arrow keys

• five easy-to-use interface keys — allow for
easy commissioning of the thermostat, and
eliminate the need for DIP switches

• two configurable digital inputs — provide
additional inputs for advanced functions
such as remote night setback, occupancy
override, and service or filter alarms

• over 20 configurable parameters — enable
the thermostat to adapt to any application,
allowing installer parameter access without
opening the thermostat cover

• optional discharge air sensor — monitors
unit efficiency

• economizer output (TEC22x4-4 and
TEC22x4-4+PIR models) — provides
control of economizer operation for single­and multi-stage unitary rooftop equipment

ONWORKS

• configurable auxiliary output — provides
24 VAC control for lighting, exhaust fans,
and other auxiliary functions

Repair Information

If a TEC226x-4(+PIR) or TEC220x-4(+PIR)
Series Thermostat Controller fails to operate
within its specifications, replace the unit. For a
replacement thermostat controller, contact the
nearest Johnson Controls® representative.

Selection Chart

LONWORKS Network Configurable Staged Thermostat Controller Models (Part 1 of 2)

Code Number Description Programmable Applications

TEC2261-4 Single-Stage Yes Unit Heaters and Single-Stage Packaged Heating/Cooling
TEC2201-4 No
TEC2261-4+PIR Single-Stage with Onboard Occupancy
TEC2201-4+PIR No
TEC2262-4 Heat Pump Yes Heat Pumps with up to 3 Heating/2 Cooling Stages
TEC2202-4 No
TEC2262-4+PIR Heat Pump with Onboard Occupancy Sensor Yes
TEC2202-4+PIR No

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

Equipment

Yes

Sensor

www.johnsoncontrols.com

1 of 3

TEC226x-4(+PIR) and TEC220x-4(+PIR) Series LONWORKS® Network Staged Thermostat

Dimensions, in. (mm) (TEC22xx-4 and TEC22xx-4+PIR Model Shown)

4-15/16

(125)

3-3/8

(86)

1-1/8

(29)

(125)

(86)

(36)

70.0ºF

Room Temp

Room Temp

Controllers (Continued)

LONWORKS Network Configurable Staged Thermostat Controller Models (Part 2 of 2)

Code Number Description Programmable Applications

TEC2263-4 Multi-Stage Yes Multi-Staged Packaged Heating/Cooling Equipment
TEC2203-4 No
TEC2263-4+PIR Multi-Stage with Onboard Occupancy Sensor Yes
TEC2203-4+PIR No
TEC2264-4 Multi-Stage, Economizer Yes Economizer Operation for Single- and Multi-Stage Unitary
TEC2204-4 No
TEC2264-4+PIR Multi-Stage, Economizer with Onboard
TEC2204-4+PIR No

Occupancy Sensor

Yes

Accessories

Code Number Description

SEN-600-1 Remote Indoor Air Temperature Sensor
SEN-600-4 Remote Indoor Air Temperature Sensor with Occupancy Override and LED

TE-6361M-1
TE-636S-1
TE-6363P-1
TEC-3-PIR

1. Additional TE-636xx-x Series 10k Type II Thermistor Sensors are available; refer to the TE-6300 Series Temperature Sensors Product Bulletin (LIT-216320) for

2. The TEC-3-PIR Accessory Cover can be used to replace the existing cover on a non-PIR TEC22xx-4 Staged Thermostat Controller to provide occupancy

1

1

1

2

more details.
sensing capability.

Duct Mount Air Temperature Sensor
Strap-Mount Temperatu re Sensor
Outdoor Air Temperature Sensor
Cover with Occupancy Sensor

Rooftop Equipment

4-15/16

70.0ºF

3-3/8

1-3/8

FIG:dmnsns_tec22xx

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

2 of 3

www.johnsoncontrols.com