Johnson Controls TE-6100 Series Catalog Page

Code No. LIT-1922235 Issued December 9, 2011

TE-6100 Series

Temperature Sensors and Completed Sensor/Hardware Assemblies

Description

TE-6100 Series Completed Assemblies are used in a wide variety of temperature sensing applications. In addition to these completed units, there are various other sensing elements and hardware configurations that may be field assembled, depending on the application.

Refer to the TE-6000 Temperature Sensing Elements Product Bulletin (LIT-216288) for available temperature sensing elements and the TE-6001 Hardware Assemblies for

TE-6000 Temperature Elements Product/Technical Bulletin (LIT-216300) for

available hardware configurations. Refer to the TE-6100 Series Temperature

Sensors and Completed Sensor/Hardware Assemblies Product Bulletin (LIT-216310) for

important product information.

Features

• Nickel and silicon sensor elements — provide multiple resistance ranges for a variety of applications

• Modular jack connectors on room temperature sensors TE-6100-11 and -12

— allow connection to controllers and test

panels over standard or plenum-rated telephone cable

• Optional mounting assemblies

— provide

easy mounting through the use of a mounting bracket or wallplate

Repair Information

If the TE-6100 Temperature Sensors and completed sensor/hardware assemblies fail to operate within their specifications, replace the units. For replacement devices, contact the nearest Johnson Controls® representative.

Selection Charts

TE-6100 Assemblies

Product Code Number

TE-6100-1 Nickel 17 ft (5.18 m) Averaging, Temperature Sensing Element (1,000 ohms, ±1%) with Conduit Box TE-6100-2 Similar to TE-6100-1 Except 8 ft (2.4 m) Averaging Element TE-6100-3 Temperature Sensing Element (1,000 ohms, ±1%), Dual-Wound with Conduit Box

TE-6100-8 TE-6100-11 TE-6100-12

TE-6100-960 TE-6100-961

TE-6100-962 18 in. (457 mm) Duct-Temperature Sensor Assembly, Averaging Type (may be shortened to 8 in. [203 mm])

1. Order the T-4000 Cover separately.

2. Order the TE-1800-9600 Mounting Kit separately.

1, 2

1 1

Accessories

Product Code Number

T-275-100 Mounting clip for Use with Averaging Sensors TE-6001-8 Mounting Bracket for Use with Averaging Sensors TE-6001-961 Push button switch for Use with TE-6100-11, -12, -960, -961 TE-6001-962 Toggle switch for Use with TE-6100-11, -12, -960, -961 TE-1800-9600 Electrical Wallbox Mounting Adaptor Kit Includes Wallplate Adaptor, Mounting Bracket, and Screws

Cover and Faceplate Options (Part 1 of 2)

Product Code Number

T-4000-2139 Horizontal Brushed Aluminum/Beige Without Setpoint Window or Thermometer, with Johnson Controls Logo T-4000-2140 Without Setpoint Window, with °F/°C Thermometer and Johnson Controls Logo T-4000-2141 Exposed Setpoint, without Thermometer, with Johnson Controls Logo T-4000-2142 Exposed Setpoint, with °F/°C Thermometer and Johnson Controls Logo T-4000-2639 Brown and Gold/Beige Without Setpoint Window or Thermometer, with Johnson Controls Logo T-4000-2640 Without Setpoint Window, with °F/°C Thermometer and Johnson Controls Logo T-4000-2642 Exposed Setpoint, with °F/°C Thermometer and Johnson Controls Logo T-4000-2138 Horizontal or Vertical Brushed Aluminum/Beige Without Setpoint Window, Thermometer, or Johnson Controls Logo

Type Description

Room Temperature Sensing Element (1,000 ohms, ±1%) with Setpoint 55 to 85°F (13 to 29°C), without Cover Nickel Sensor Room Sensing Element with Modular Jack, without Cover Similar to TE-6100-11 Except with Setpoint, without Cover

Silicon Base Room Thermostat with Setpoint, without Cover

Space Temperature Assembly with Wallplate Adaptor and Mounting Bracket

Description

Cover Position Faceplate/Cover Color Description

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

www.johnsoncontrols.com

1 of 2

TE-6100 Series Temperature Sensors and Completed Sensor/Hardware Assemblies

Cover and Faceplate Options (Part 2 of 2)

Product Code Number

T-4000-2144 Vertical Brushed Aluminum/Beige Without Setpoint Window or thermometer, with Johnson Controls Logo T-4000-2145 Exposed Setpoint, without Thermometer, with Johnson Controls Logo T-4000-2146 Exposed Setpoint, with °F/°C Thermometer and Johnson Controls Logo T-4000-2644 Brown and Gold/Beige Without Setpoint Window or Thermometer, with Johnson Controls Logo T-4000-2645 Exposed Setpoint, without Thermometer, with Johnson Controls Logo

1. The T-4000 covers are for use with the TE-6100-8, -11, 12, -960, and -961 devices.

Technical Specifications

Elements TE-6100-1 through -12 Nickel resistance type

Reference Resistances TE-6100-1 through -12 1,000 ohms at 70°F (21°C)

Temperature Coefficient TE-6100-1 through -12 Positive, approximately 3 ohms/°F (5.4 ohms/°C)

Resistance Tolerances TE-6100-1, -2, -3, -8 ±1.0% at 70°F (21°C)

Ambient Operating Environment

Set Point Range TE-6100-8 55 to 85°F (13 to 29°C), °F and °C scales furnished

Cover Position Faceplate/Cover Color Description

TE-6100 Series Temperature Sensors and Completed Sensor/Hardware Assemblies

TE-6100-960, -961, -962 PTC silicon

TE-6100-960, -961, -962 1,035 ohms at 77°F (25°C)

TE-6100-960, -961, -962 Positive, approximately 4.3 ohms/°F (7.7 ohms/°C)

TE-6100-960, -961, -962 Calibrated for 1,035 ohms ±0.5/-0.15 ohms at 77°F (25°C) TE-6100-1, -2, -3 -50 to 250°F (-46 to 121°C) TE-6100-8 0 to 130°F (-18 to 54°C), 10 to 90% RH, noncondensing TE-6100-11, -12, -960, -961 32 to 104°F (0 to 40°C), 10 to 90% RH, noncondensing, limited by an 85°F (29°C)

TE-6100-962 -40 to 216°F (-40 to 102°C)

TE-6100-12 Warmer/cooler scale TE-6100-960 50 to 85°F (10 to 29°C), °F and °C scales furnished

maximum dew point

The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult the local Johnson Co ntrols office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.

www.johnsoncontrols.com

2 of 2