Johnson Controls RIBTU1S, RIBTH1S Data Sheet

RELAYS

10 AMP PILOT CONTROL RELAYS

RIBTU1S

Enclosed Relay Hi/Low Separation 10 Amp SPST + Override with 10-30 Vac/dc/

120 Vac Coil

Selectable

Jumper Wire

Comm

10-30 Vac/dc

120 Vac

SPECIFICATIONS

# Relays & Contact Type:

Expected Relay Life:

Operating Temperature:

Humidity Range:

Operate Time:

Relay Status:

Dimensions:

Wires:

Approvals:

Housing Rating:

Gold Flash:

Override Switch:

CLOSED

OPEN

AUTO

One (1) SPST Continuous Duty Coil 10 million cycles minimum mechanical

-30 to 140° F 5 to 95% (noncondensing) 20ms LED On = Activated

4.00˝ x 4.00˝ x 1.80˝ with .50˝ NPT nipple 16˝, 600V Rated UL Listed, UL916, UL864, C-UL California State Fire Marshal UL Accepted for Use in Plenum, NEMA 1 Yes

Org

RIBTH1S

Enclosed Relay Hi/Low Separation 10 Amp SPST + Override with 10-30 Vac/dc/

208-277 Vac Coil

Selectable

Jumper Wire

Comm

10-30 Vac/dc

208-277 Vac

CLOSED

OPEN

AUTO

Contact Ratings:

10 Amp Resistive @ 277 Vac 480 VA Pilot Duty @ 277 Vac 480 VA Ballast @ 277 Vac

Not rated for Electronic Ballast

600 Watt Tungsten @ 120 Vac (N/O) 240 Watt Tungsten @ 120 Vac (N/C) 1/3 HP @ 120-240 Vac (N/O) 1/6 HP @ 120-240 Vac (N/C) 1/4 HP @ 277 Vac (N/O) 1/8 HP @ 277 Vac (N/C)

Notes:

• Normally Open or Normally Closed

selected by yellow jumper wire

Org

Made in USA

Meets

“Buy American”

of ARRA 2009

Coil Current:

33 mA @ 10 Vac 35 mA @ 12 Vac 46 mA @ 24 Vac 55 mA @ 30 Vac

13 mA @ 10 Vdc 15 mA @ 12 Vdc 18 mA @ 24 Vdc

20 mA @ 30 Vdc 28 mA @ 120 Vac (RIBTU1S) 39 mA @ 208-277 Vac (RIBTH1S)

Coil Voltage Input:

10-30 Vac/dc ; 120 Vac ; 50-60 Hz (RIBTU1S) 10-30 Vac/dc ; 208-277 Vac ; 50-60 Hz (RIBTH1S) Drop Out = 2.1 Vac / 2.8 Vdc Pull In = 9 Vac / 10 Vdc

071717