10 AMP PILOT CONTROL RELAYS
RIBTU2C
Enclosed Relays Hi/Low Separation 10 Amp 2 SPDT with 10-30 Vac/dc/120 Vac Coil
Comm |
Comm |
10-30 Vac/dc |
10-30 Vac/dc |
120 Vac |
120 Vac |
Blu - N/C |
Brn - N/O |
Yel - Comm |
Prp - Comm |
Org - N/O |
Gry - N/C |
RIBTH2C |
|
|
Enclosed Relays Hi/Low Separation 10 Amp |
|
|
2 SPDT with 10-30 Vac/dc/208-277 Vac Coil |
<![if ! IE]> <![endif]>RELAYS |
|
Comm |
Comm |
|
10-30 Vac/dc |
10-30 Vac/dc |
|
208-277 Vac |
208-277 Vac |
|
|
|
Made in USA |
|
|
Meets |
|
|
“Buy American” |
|
|
of ARRA 2009 |
Blu - N/C |
Brn - N/O |
|
Yel - Comm |
Prp - Comm |
|
Org - N/O |
Gry - N/C |
|
SPECIFICATIONS
# Relays & Contact Type: |
Two (2) SPDT Continuous Duty Coil |
Contact Ratings: |
Coil Current: |
13 mA @ 10 Vdc |
|
Expected Relay Life: |
10 million cycles minimum mechanical |
10 Amp Resistive @ 277 Vac |
33 mA @ 10 Vac |
||
Operating Temperature: |
-30 to 140° F |
10 Amp Resistive @ 28 Vdc |
35 mA @ 12 Vac |
15 mA @ 12 Vdc |
|
Humidity Range: |
5 to 95% (noncondensing) |
480 VA Pilot Duty @ 240-277 Vac |
46 mA @ 24 Vac |
18 mA @ 24 Vdc |
|
Operate Time: 20ms |
480 VA Ballast @ 277 Vac |
55 mA @ 30 Vac |
20 mA @ 30 Vdc |
||
Relay Status: LED On = Activated |
Not rated for Electronic Ballast |
28 mA @ 120 Vac (RIBTU2C) |
|||
Dimensions: 4.00˝ x 4.00˝ x 1.80˝ with .50˝ NPT nipple |
600 Watt Tungsten @ 120 Vac (N/O) |
39 mA @ 208-277 Vac (RIBTH2C) |
|||
Wires: 16˝, 600V Rated |
240 Watt Tungsten @ 120 Vac (N/C) |
Coil Voltage Input: |
|
||
Approvals: UL Listed, UL916, UL864, C-UL California |
1/3 HP @ 120-240 Vac (N/O) |
|
|||
10-30 Vac/dc ; 120 Vac ; 50-60 Hz (RIBTU2C) |
|||||
|
State Fire Marshal |
1/6 HP @ 120-240 Vac (N/C) |
|||
|
10-30 Vac/dc ; 208-277 Vac ; 50-60 Hz (RIBTH2C) |
||||
Housing Rating: UL Accepted for Use in Plenum, NEMA 1 |
1/4 HP @ 277 Vac (N/O) |
||||
Drop Out = 2.1 Vac / 2.8 Vdc |
|||||
Gold Flash: Yes |
1/8 HP @ 277 Vac (N/C) |
||||
Pull In = 9 Vac / 10 Vdc |
|||||
Override Switch: No |
|
||||
|
|
|
071717