Johnson Controls RIBMNWD12-BCDI Data Sheet

NETWORK COMPATIBLE DEVICE

RIBMNWD12-BCDI

2.75˝ Track Mount BACnet® MS/TP Network 12 Binary Input Device; Optional End of Line Resistor

(EOL) Included.

24 Vac/dc

MSTP

A(–)

B(+)

}

REF

}

BI 1 BI 2

+V Vin COM

}

+V Vin COM}+V Vin COM

BI 3

}

+V Vin COM

BI 4

}

+V Vin COM

BI 5

}

+V Vin COM

BI 6

}

Made in USA

Meets

“Buy American”

of ARRA 2009

1 0

Not Used

Baud Rate

LSB

MS/TP ADDRESS

Connect Jumper for EOL.

1 2 3 4 5 6 7 8 9 10

MSB

Disconnect for no terminating resistor.

SPECIFICATIONS

Operating Temperature:

Humidity Range:

Green LED:

Red LED:

Dimensions:

Track Mount:

Network Media:

Terminations:

Polarity:

Band Rate:

Red LED = Power

Pink LED = Digital Input Status

Connect Jumper for Dry Contact Operation. Disconnect for voltage input operation.

Green LED = Network Communication

}

COM Vin +V

BI 12

COM Vin +V

o 140° F

-30 t 5 to 95% (noncondensing) Network Communication ON = Power Present

5.85˝ x 2.75˝ x 1.75˝ MT212-6 Mounting Track Provided

Twisted Pair 22-24AWG, shielded recommended Functional Devices product installed at both ends of the MS/TP network – Use 120 Ω end of line resistors. All other cases – Follow instructions from the device installed at the end of the MS/TP network. Network is polarity sensitive 9600, 19200, 38400, 57600, 76800, 115200 (DIP Switch Selectable)

}

BI 11

COM Vin +V

}

BI 10

COM Vin +V

}

BI 9

Power Input Ratings:

41 mA @ 24 Vdc 53 mA @ 24 Vac

BACnet® Details:

• MS/TP Address & Baud Rate must be set prior to

power up via DIP switches.

• Device ID will default to 277XXX where XXX is the

MS/TP Address. Examples:

MS/TP Address - 004 Device ID - 277004

• Device ID can be changed via network command.

Once changed, it will no longer default to 277XXX. (MS/TP Address & Device ID must be unique.)

• Device Instance changed via Object Identier

Property of Device Object

• Full wave rectied

}

BI 8

COM Vin +V

}

BI 7

MS/TP Address - 121 Device ID - 277121

Binary Input Ratings:

Dry Contact: 3 mA @ 30 Vdc max. Voltage Input: 12 mA @ 25 Vac/dc max.

• Objects included in device are:

BI 1 (Binary input) BI 2 (Binary input) BI 3 (Binary input) BI 4 (Binary input) BI 5 (Binary input) BI 6 (Binary input)

• PIC Statement available on website.

http://www.functionaldevices.com/pdf/pics/ RIBMNWD12-BCDI_PICS.pdf

Or scan QR code with your smart phone.

BI 7 (Binary input) BI 8 (Binary input) BI 9 (Binary input) BI 10 (Binary input) BI 11 (Binary input) BI 12 (Binary input)

DIP SWITCHES* BAUD RAT E

8 9 10

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

1 0 1

* 0 = Open ; 1 = Closed

All other combinations=9600 baud

9600

19200

38400

57600

76800

115200

Example of Dry Contact Input Operation

Dry

Contact

N/C

+V Vin COM

Jumper

Connected

Example of Voltage Input Operation

Voltage

Source

+ –

+V Vin COM

Jumper

Disconnected

071417