Johnson Controls RIBL3C, RIBL4C Data Sheet

10 AMP PILOT CONTROL RELAYS

RIBL3C	RIBL4C
Enclosed Relays 10 Amp 3 SPST-N/O with	Enclosed Relays 10 Amp 3 SPST-N/O +
10-30 Vac/dc Coil	1 SPDT with 10-30 Vac/dc Coil

Wht/Blk	Blk
RELAY 1	RELAY 1
	Blk
Wht/Blu	Blu
RELAY 2	RELAY 2
	Blu
Wht/Yel	Yel
RELAY 3	RELAY 3
	Yel
Wht/Red
COMM

•All relay coils use the same common

•All relay coils 10-30Vac/dc

Wht/Blk		Blk
RELAY 1	RELAY 1
		Blk
Wht/Blu		Blu
RELAY 2	RELAY 2
		Blu
Wht/Yel		Yel
RELAY 3	RELAY 3
		Yel
Wht/Brn		Gry
RELAY 4
	RELAY 4	Prp
Wht/Red
COMM		Brn

•All relay coils use the same common

•All relay coils 10-30Vac/dc

Made in USA

Meets

“Buy American”

of ARRA 2009

SPECIFICATIONS

# Relays & Contact Type: Three (3) SPST Continuous Duty Coil (RIBL3C)		Contact Ratings:
	Three (3) SPST + One (1) SPDT Continuous	10 Amp Resistive @ 277 Vac
Expected Relay Life:	Duty Coil (RIBL4C)	10 Amp Resistive @ 28 Vdc
	10 million cycles minimum mechanical	480 VA Pilot Duty @ 240-277 Vac
Operating Temperature:	-30 to 140° F	480 VA Ballast @ 277 Vac
Humidity Range:	5 to 95% (noncondensing)	Not rated for Electronic Ballast
Operate Time: 20ms		600 Watt Tungsten @ 120 Vac (N/O)
Relay Status: LED On = Activated		240 Watt Tungsten @ 120 Vac (N/C)
Dimensions: 4.00˝ x 4.00˝ x 1.80˝ with .50˝ NPT nipple		1/3 HP @ 120-240 Vac (N/O)
Wires: 16˝, 600V Rated		1/6 HP @ 120-240 Vac (N/C)
Approvals: UL Listed, UL916, UL864, C-UL		1/4 HP @ 277 Vac (N/O)
	California State Fire Marshal	1/8 HP @ 277 Vac (N/C)
Housing Rating: UL Accepted for Use in Plenum, NEMA 1

Gold Flash: Yes

Override Switch: No

Coil Current:	13 mA @ 10 Vdc
33 mA @ 10 Vac
35 mA @ 12 Vac	15 mA @ 12 Vdc
46 mA @ 24 Vac	18 mA @ 24 Vdc
55 mA @ 30 Vac	20 mA @ 30 Vdc

Coil Voltage Input:

10-30 Vac/dc ; 50-60 Hz Drop Out = 2.1 Vac / 2.8 Vdc Pull In = 9 Vac / 10 Vdc

Notes:

•Order Normally Closed by adding “-NC” to end of model number

<![if ! IE]>

<![endif]>RELAYS

071417