Johnson Controls P-5500 Series Catalog Page

P-5500 Series

P-5500-1022

Pneumatic Pressure Indicator

Code No. LIT-1921240 Issued January 15, 2008

Description

The P-5500 Pneumatic Pressure Indicator is an analog type gauge providing a continuous visual indication of pressure measurement of one transmitter in a 3 to 15 psig (21 to 105 kPa) pneumatic transmission system.

Selection Chart

Code Number

P-5500-1046 0 to 15 psig (0 to 103.4 kPa) P-5500-1006 0 to 50 psig (0 to 345 kPa) P-5500-1007 0 to 100 psig (0 to 690 kPa) P-5500-1008 0 to 200 psig (0 to 1379 kPa) P-5500-1005 -30 in. Hg to 30 psig

P-5500-43 -0.05 to 0.05 in. WG

P-5500-1039 0 to 0.1 in. WG (0 to 24.9 Pa) P-5500-1040 0 to 0.25 in. WG (0 to 62.25 Pa) P-5500-1019 0 to 0.5 in. WG (0 to 124.5 Pa P-5500-44 0 to 1.0 in. WG (0 to 249 Pa) P-5500-1018 0 to 2.0 in. WG (0 to 498 Pa) P-5500-1022 0 to 5.0 in. WG (0 to 1245 Pa) P-5500-1024 0 to 10.0 in. WG (0 to 2490 Pa)

Description

(-101 to 207 kPa)

(-12.5 to 12.5 Pa)

Refer to P-5500 Pneumatic Pressure Indicator Product Bulletin (LIT-7171345) for important product information.

Features

• available in 3-1/2 in. (89 mm) size

• pressure readout in in. WG, psig and equivalent metric scale (kPa and Pa) printed in blue

• removable clear plastic lens cover for easy cleaning.

• mounts flush with provided U-clamps, or on surface.

• U-clamps are notched for breakoff to accommodate various panel thicknesses.

Technical Specifications

Pneumatic Pressure Indicator

Accuracy ±1/2% of Full Range

Pressure Range 3 to 15 psig (21 to 105 kPa) Ambient Temp.

Limits Air Connection 1/8 in. NPT Mounting Flush or Surface

P-5500 Series

per ANSI Spec. B40.1M

-20 to 150°F (-29 to 66°C)

Repair Information

If the P-5500 Pneumatic Pressure Indicator fails to operate within its specifications, replace the unit. For a replacement indicator, contact the nearest Johnson Controls® representative.

The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.

www.johnsoncontrols.com