Page 1
M9220 Series Electric
Spring-Return Actuator
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators
Description
The M9220-xxx-3 actuators are direct-mount,
spring-return electric actuators that operate
with these available power options:
• AC 24 V at 50/60 Hz or DC 24 V
(AGx, BGx, GGx, HGx)
• AC 120 V at 60 Hz (BAx)
• AC 230 V at 50/60 Hz (BDx)
These bidirectional actuators do not require a
damper linkage, and are easily installed on
dampers with 1/2 to 3/4 in. or 12 to 19 mm
round shafts, or 3/8 and 1/2 in. or 10, 12, and
14 mm square shafts using the standard shaft
clamp included with the actuator. An optional
M9220-600 Jackshaft Coupler Kit is available
for 3/4 to 1-1/16 in. or 19 to 27 mm round
shafts, or 5/8 and 3/4 in. or 16, 18, and 19 mm
square shafts.
A single M9220-xxx-3 Electric Spring-Return
Actuator provides a running and spring-return
torque of 177 lb·in (20 N·m). Two or three
models mounted in tandem deliver twice or
triple the torque. Integral line voltage auxiliary
switches are available on the -xxC models to
indicate end-stop position or to perform
switching functions within the selected rotation
range.
Refer to the M9220-xxx-3 Electric
Spring-Return Actuators Product Bulletin
(LIT-12011057) for important product
application information.
Features
• Available Torques of 177 lb·in (20 N·m) for
Single Actuators, 354 lb·in (40 N·m) for Two
Models, and 531 lb·in (60 N·m) for Three
Models Mounted in Tandem — offer a
selection that is most suitable for the
application.
• Reversible Mounting Design — simplifies
installation and enables the actuator to
spring return in either direction.
• Electronic Stall Detection throughout Entire
Rotation Range — extends the life of the
actuator by deactivating the actuator motor
when an overload condition is detected.
• Removable Coupler — adapts to a shorter
damper shaft.
• Integral 48 in. (1.2 m) Halogen-Free Cables
with Colored and Numbered Conductors —
simplify field wiring.
• Integral Auxiliary Switches (xxC Models) —
provide one fixed and one adjustable switch
point with line voltage capability.
• NEMA 2 (IP54) Rated Aluminum Enclosure
— protects the internal components of the
actuator from dirt and moisture.
• Easy-to-Use Locking Manual Override with
Auto Release and Crank Storage — allows
for manual positioning of the actuator hub.
• Integral Connectors for 3/8 in. Flexible
Metal Conduit — simplify installation and
field wiring.
• Microprocessor-Controlled Brushless
DC Motor (-AGx, -GGx, and -HGx types) —
provides constant run-time independent of
torque.
Code No. LIT-1900358
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators
Applications
The M9220-xxx-3 Electric Spring-Return
Actuators provide reliable control of dampers
and valves in HVAC systems. The
M9220-xxx-3 Actuators are available for use
with on/off, floating, and proportional
controllers.
Repair Information
If the M9220 Series Electric Actuator fails to
operate within its specifications, replace the
unit. For a replacement actuator, contact the
nearest Johnson Controls® representative.
Selection Chart
Code Number Control Type Auxiliary
M9220-AGA-3 Floating None AC 24 V at 50/60 Hz or DC 24 V
M9220-AGC-3 Floating Two AC 24 V at 50/60 Hz or DC 24 V
M9220-BAA-3 On/Off None AC 120 V at 60 Hz
M9220-BAC-3 On/Off Two AC 120 V at 60 Hz
M9220-BDA-3 On/Off None AC 230 V at 50/60 Hz
M9220-BDC-3 On/Off Two AC 230 V at 50/60 Hz
M9220-BGA-3 On/Off None AC 24 V at 50/60 Hz or DC 24 V
M9220-BGC-3 On/Off Two AC 24 V at 50/60 Hz or DC 24 V
M9220-GGA-3 Proportional None AC 24 V at 50/60 Hz or DC 24 V
M9220-GGC-3 Proportional Two AC 24 V at 50/60 Hz or DC 24 V
M9220-HGA-3 Proportional with Adjustable Zero and Span None AC 24 V at 50/60 Hz or DC 24 V
M9220-HGC-3 Proportional with Adjustable Zero and Span Two AC 24 V at 50/60 Hz or DC 24 V
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
Switches
Power Requirements
V–49
Page 2
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators (Continued)
Accessories
Code Number Description
DMPR-KC003
M9000-153 Crankarm (Quantity 1)
M9000-158 Tandem Mounting Kit Used to Mount Two Models of M9220-xxx-3 Series Proportional Electric Spring-Return Actuators (Quantity 1)
M9000-170 Remote Mounting Kit, Horizontal. Kit Includes Mounting Bracket, M9000-153 Crankarm, Ball Joint, and Mounting Bolts (Quantity 1)
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators
M9000-171 Remote Mounting Kit, Vertical. Kit Includes Mounting Bracket, M9000-153 Crankarm, Ball Joint, and Mounting Bolts (Quantity 1)
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators
M9000-320 Weather Shield Enclosure - NEMA 3R Enclosure for Protecting a Single M9210/2 0 Actuator from Rain, Sleet, or Snow (Quantity 1)
M9000-400 Jackshaft Linkage Kit. Open-Ended Design Enables Clamping onto a Jackshaft without Requiring Access to the Ends of the Jackshaft
M9000-604 Replacement Anti-Rotation Bracket Kit (with Screws) for M9220-xxx-3 Series Proportional Electric Spring-Return Actuators (Quantity 1)
M9200-100 Threaded Conduit Adapter, 1/2 NPSM, for M9210(20) and M(VA)9208 Series Actuators (Quantity 5)
M9220-600 1 in. (25 mm) Jackshaft Coupler Kit (with Locking Clip) for Mounting M9220-xxx-3 Proportional Electric Spring-Return Actuators on
M9220-601 Replacement Coupler Kit (with Locking Clip) for Mounting M9220-xxx-3 Proportional Electric Spring-Return Actuators on Dampers with
M9220-602 Replacement Locking Clips for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Five per Bag)
M9220-603 Adjustable Stop Kit for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Quantity 1)
M9220-604 Replacement Manual Override Cranks for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Five per Bag)
M9220-610 Replacement Shaft Gripper, 10 mm Square Shaft with Locking Clip (Quantity 1)
M9220-612 Replacement Shaft Gripper, 12 mm Square Shaft with Locking Clip (Quantity 1)
M9220-614 Replacement Shaft Gripper, 14 mm Square Shaft with Locking Clip (Quantity 1)
1. Furnished with the damper and may be ordered separately
Electric Damper Actuators
1
7 in. (178 mm) Blade Pin Extension (without Bracket) for Johnson Controls Direct-Mount Damper Applications (Quantity 5)
(Quantity 1)
(Quantity 1)
Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts, or 5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts (Quantity 1)
1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/2in. or 10, 12, and 14 mm Square Shafts (Quantity 1)
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–50
Page 3
M9220-xxx-3 Electric Spring-Return Actuator Dimensions, in. (mm)
A
4
(102)
10-5/16
(262)
2-3/16
(56)
F
I
G
:
d
m
n
s
1-3/4
(44)
3-3/16
(81)
3/4
(19)
(56)
2
(51)
1-19/32
(40)
1-1/16
(27)
1/4 (6.5)
Mounting Hole
(6 Locations)
1-19/32
(40)
1-19/32
(40)
6-15/16
(176)
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators (Continued)
Dimensions
10
(254)
1/8
(3)
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators
1
(25)
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–51
2-3/16
Page 4
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators (Continued)
Technical Specifications
Product Codes M9220-AGx-3 Models: Floating
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators
Power Requirements AGx, HGx, GGx Models AC 24 V (19.2 to 30 V) at 50/60 Hz: Class 2, 15.5 VA Running,
Transformer Sizing Requirements AGx, HGx, GGx Models 20 VA Minimum per Actuator
Input Signal/Adjustments AGx Models DC 0 (2) to 10 V or 0 (4) to 20 mA with Field Furnished 500 Ohm Resistor;
Control Input Impedance GGx, HGx Models Voltage Input: 200,000 Ohms;
Feedback Signal GGx Models 0 (2) to 10 VDC for Desired Rotation Range up to 90°;
Auxiliary Switch Ra ti n g xxC Models Two Single-Pole, Double-Throw (SPDT), Double-Insulated Switches with Gold Flash Contacts:
Spring Return Direction is Selectable with Mounting Position of Actuator:
Running and Spring Return Torque 177 lb·in (20 N·m) for a Single Actuator;
Valid Tandem Combinations Two M9220-Bxx-3
Rotation Range Adjustable from 30 to 90° CW or CCW with Optional
Rotation Time
Power On (Running)
Rotation Time
Power Off
(Spring Returning)
Cycles 60,000 Full Stroke Cycles; 1,500,000 Repositions
Audible Noise Rating
(AGx, HGx, GGx Models)
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators (Part 1 of 2)
M9220-Bxx-3 Models: On/Off
M9220-GGx-3 Models: Proportional
M9220-HGx-3 Models: Proportional Adjustable
7.7 VA Holding Positi on;
DC 24 V (21.6 to 26.4 V): Class 2, 6.7 W Running, 2.9 W Holding Position
BAx Models AC 120 V (AC 102 to 132 V) at 60 Hz: 0.25 A Running, 0.13 A Holding Position
BDx Models AC 230 V (AC 198 to 264 V) at 50/60 Hz: 0.15 A Running, 0.09 A Holding Position
BGx Models AC 24 V (19.2 to 30 V) at 50/60 Hz: Class 2, 24.6 VA Running,
Bxx Models 25 VA Minimum per Actuator
GGx Models Factory Set DC 0 to 10 V, CW Rotation with Signal Increase;
HGx Models Factory Set DC 0 to 10 V, CW Rotation with Signal Increase;
HGx Models 0 to 10 VDC for Desired Rotation Range up to 90°;
AGx, HGx, GGx Models 150 Seconds for 0 to 177 lb·in (0 to 20 N·m) at All Operating Conditions; Independent of Load
BGx Models 24 to 57 Seconds for 0 to 177 lb·in (0 to 20 N·m) at All Operating Conditions; 35 Seconds
AGx, HGx, GGx Models 20 Seconds for 0 to 177 lb·in (0 to 20 N·m) at Room Temperature
BGx Models 11 to 15 Seconds for 0 to 177 lb·in (0 to 20 N·m) at Room Temperature;
Power On (Running) < 40 dBA at 39-13/32 in. (1 m)
Power On (Holding) < 20 dBA at 39-13/32 in. (1 m)
Power Off
(Spring Returning)
7.7 VA Holding Positi on;
DC 24 V (21.6 to 26.4 V): Class 2, 17.6 W Running, 2.8 W Holding Position
Switch Selectable Direct or Reverse Action with Signal Increase, 500 ms Minimum Pulse Width
Selectable DC 0 (2) to 10 V or 0 (4) to 20 mA with Field Furnished 500 Ohm, 0.25 W Minimum
Resistor; Switch Selectable Direct or Reverse Action with Signal Increase
Selectable DC 0 to 10 V or 0 to 20 mA with Field Furnished 500 Ohm, 0.25 W Minimum Resistor;
Start Point Programmable DC 0 to 10 V;
Span Programmable DC 2 to 10 V;
Switch Selectable Direct or Reverse Action with Signal Increase
Current Input: 500 Ohms with Field Furnished 500 Ohm Resistor
Corresponds to Rotation Limits, 1 mA Maximum
Corresponds to Rotation Limits, 1 mA Maximum
AC 24 V, 50 VA Pilot Duty;
AC 120 V, 5.8 A Resistive, 1/4 hp, 275 VAPilot Duty;
AC 240 V, 5.0 A Resistive, 1/4 hp, 275 VAPilot Duty
Side A, Actuator Face away from Damper for CCW Spring Return;
Side B, Actuator Face away from Damper for CW Spring Return
354 lb·in (40 N·m) for Two Models Mounted in Tandem
531 lb·in (60 N·m) for Three Models Mounted in Tandem
Three M9220-AGx-3
One M9220-HGx-3 Master with One or Two M9220-GGX-3 Slaves
One M9220-GGx-3 Master with One or Two M9220-GGX-3 Slaves
M9220-603 Adjustable Stop Kit; Mechanically Limited to 90°
Nominal at Full Rated Load
35 Seconds Maximum for 0 to 177 lb·in (0 to 20 N·m) at -22°F (-30°C)
130 Seconds Maximum for 0 to 177 lb·in (0 to 20 N·m) at -40°F (-40°C)
< 55 dBA at 39-13/32 in. (1 m)
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–52
Page 5
Electric Damper Actuators
M9220 Series Electric Spring-Return Actuators (Continued)
M9220 Series Electric Spring-Return Actuators (Part 2 of 2)
Audible Noise Rating
(BGx Models)
Electrical Connections Actuator (All Models) 48 in. (1.2 m) Halogen-Free Cable with 18 AWG (0.75 mm
Conduit Connections Integral Connectors for 3/8 in. (10 mm) Flexible Metal Conduit
Mechanical Connections Standard Shaft Clamp
Aluminum Enclosure NEMA 2 (IP54) for All Mounting Orientations
Ambient Conditions Operat ing -40 to 131°F (-40 to 55°C); 90% RH Maximum, Noncondensing
Dimensions See Dimensions
Compliance United States UL Listed, CCN XAPX, File E27734; to UL 60730-1A: 2003-08, Ed. 3.1,
Shipping Weight xGx Models 6.4 lb (2.9 kg)
Power On (Running) < 66 dBA at 39-13/32 in. (1 m)
Power On (Holding) < 18 dBA at 39-13/32 in. (1 m)
Power Off
(Spring Returning)
Auxiliary Switches
(xxC Models)
Included with Actuator
Optional M9220-600
Jackshaft Coupler Kit
Storage -85 to 185°F (-65 to 85°C); 95% RH Maximum, Noncondensing
Canada UL Listed, CCN XAPX7, File E27734; to UL 60730-1:02-CAN/CSA:
Europe CE Mark – Johnson Controls, Inc. declares that this product is in compliance with the essential
Australia and
New Zealand
BAx and BDx Models 7.6 lb (3.5 kg)
< 66 dBA at 39-13/32 in. (1 m)
2
) Wire Leads
48 in. (1.2 m) Halogen-Free Cable with 18 AWG (0.75 mm
1/2 to 3/4 in. or 12 to 19 mm Diameter Round Shafts, or
3/8 and 1/2 in. or 10, 12, and 14 mm Square Shafts
3/4 to 1-1/16 in. or 19 to 27 mm Diameter Round Shafts, or
5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts
.
Automatic Electrical Controls for Household and Similar Use; and
UL 60730-2-14: 2002-02, Ed. 1, Part 2, Particular Requirements for Electric Actuators.
(Models: All)
July 2002, 3rd Ed., Automatic El ectrical Controls for Household and Similar Use; and CSA C22. 2
No. 24-93 Temperature Indicating and Regulating Equipment (Models: All).
requirements and other relevant provisions of the EMC Directive 2004/108/EC and Low Voltage
Directive 2006/95/EC.
C-Tick Mark, Australia/NZ Emissions Compliant (Models: All)
2
) Wire Leads
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–53
Loading...