M9102 Series Electric
Non-Spring-Return Actuator
(5)
1-13/32
(36)
(28)
2-13/16
(71)
4-3/32
(104)
5-5/32
(131)
2-1/4
(57)
(52)
1-1/4
(32)
25/32
(20)
Set Screw
Radius
Clearance
M9102/M9104 Series Electric Non-Spring-Return Actuator
Dimensions, in. (mm)
Electric Damper Actuators
Code No. LIT-1900247
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring-Return
Actuators
Description
The M9102 and M9104 Series Actuators are
direct-mount, non-spring-return electric
actuators that operate on AC 24 V power.
These synchronous motor-driven actuators
provide floating control (AGA), floating control
with automatic shutoff (IGA), and proportional
control with selectable 0-10 or 2-10 VDC
(GGA). The -2S models are equipped with
plenum cables, and the -3S models are
equipped with terminal blocks.
All models are compact in size and are easily
installed on VAV boxes, Variable Volume and
Temperature (VVT) two-position zone
applications, or small- to medium-sized
dampers with a round shaft up to 1/2 in.
(13 mm) in diameter or a 3/8 in. (10 mm)
square shaft.
The M9102 Series Electric Non-Spring-Return
Actuators provide a running torque of
18 lb·in (2 N·m), and the nominal travel time is
30 seconds at 60 Hz (36 seconds at 50 Hz) for
90° of rotation. The M9104 Series Electric
Non-Spring-Return Actuators provide a
running torque of 35 lb·in (4 N·m), and the
nominal travel time is 60 seconds at 60 Hz
(72 seconds at 50 Hz) for 90° of rotation.
Refer to the M9102-AGA-2S, -3S and
M9104-xGA-2S, -3S Series Electric
Non-Spring-Return Actuators Product Bulletin
(LIT-1201742) for important product
application information.
Features
• Two Torques Available: 18 and 35 lb·in
(2 and 4 N·m) — offer the most suitable
choice for the specific application.
• Short 30-Second Travel Time Available —
provides a quick response for two-position
zone applications.
• 35 dBA Nominal Audible Noise Rating —
meets the audible noise requirements for
open-ceiling environments.
• Synchronous Drive — provides a constant
rotation time that is independent of the
load.
• 100,000 Cycle Rating — provides years of
trouble-free service.
• Direct Shaft Mounting with Single-Screw
Coupler — reduces installation time and
provides three-point shaft gripping.
• Magnetic Clutch — protects the actuator
gear train and the damper from damage
due to excessive torque during a stall
condition.
• Manual Gear Release — simplifies
actuator setup and adjustments in the field.
• Plenum Cable or Screw Terminal Electric
Connections — make wiring quick and
easy.
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
• Floating, Floating with Timeout, and
Proportional 0(2) to 10 VDC Control Inputs
Available — offer a full range of control
input options.
• Small, Compact Design — allows
installation in tight-fitting locations.
Applications
The M9102 and M9104 Series Electric
Non-Spring-Return Actuators are designed to
position balancing, control, round, and zone
dampers in HVAC systems. These electric
actuators are also designed to position blades
in a VAV box, or they can be used in VVT
two-position zone applications.
Each actuator mounts directly to the surface in
any convenient orientation using a single
No. 10 self-drilling sheet metal screw
(included with the actuator). No additional
linkages or couplers are required. Electrical
connections on the actuator are clearly labeled
to simplify installation.
Repair Information
If the M9102 or M9104 Series Electric Actuator
fails to operate within its specifications,
replace the unit. For a replacement actuator,
contact the nearest Johnson Controls®
representative.
2-1/16
1-3/32
9/16
(14)
3/16
m
i
d
_
t
c
a
:
G
I
F
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators
V–19
Electric Damper Actuators
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring-Return
Actuators (Continued)
Selection Chart
Code Number Control Type Running Torque Travel Time Electrical Connections
M9102-AGA-2S Floating 18 lb·in (2 N·m) 30 seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP plenum rated cab le with 19AWG
M9102-AGA-3S Floating 18 lb·in (2 N·m) 30 seconds at 60 Hz M3 screw terminals
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators
M9104-AGA-2S Floating 35 lb·in (4 N·m) 60 seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP plenum rated cab le with 19AWG
M9104-AGA-3S Floating 35 lb·in (4 N·m) 60 seconds at 60 Hz M3 screw terminals
M9104-IGA-2S Floating or on/off 35 lb·in (4 N·m) 60 seconds at 60 Hz 48 in . (1.2 m) UL 444 Type CMP plenum rated cable with 19AWG
M9104-IGA-3S Floating or on/off 35 lb·in (4 N·m) 60 seconds at 60 Hz M3 screw termina ls
M9104-GGA-2S Proportional 35 lb·in (4 N·m) 60 seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP plenum rated cab le with 19AWG
M9104-GGA-3S Proportional 35 lb·in (4 N·m) 60 seconds at 60 Hz M3 screw terminals
Accessories
Code Number Description
DMPR-KC003
DMPR-KC010 Adjustable blade position indicator switch kit with tot al switching load limited to 2,000 VA for t he following applications:
DMPR-KC011 Hex head blade pin extension without bracket
DMPR-KC012 Hex head blade pin extension without bracket
M9000-200 Commissioning tool that provides a control signal to drive 24 V on/off, floating, proportional, and/or resistive electric actuators
M9104-100 Connector for 3/8 in. (10 mm) flexible metal conduit (10 per package)
1. Furnished with the damper and may be ordered separately
Electric Damper Actuators
2
(0.75 mm
(0.75 mm
(0.75 mm
(0.75 mm
1
7 in. (178 mm) blade pin extension without bracket for Johnson Controls direct-mount damper applications
Pilot duty: AC 24 V, 50 VA; AC 125/250/277 V, 125 VA
Motor load: AC 12/250/277 V, 1/3 hp
Resistive load: AC 125 V , 11 A; AC 250 V, 8 A; AC 277 V, 7 A (all maximum values)
) conductors and 1/4 in. (6 mm) ferrule ends
2
) conductors and 1/4 in. (6 mm) ferrule ends
2
) conductors and 1/4 in. (6 mm) ferrule ends
2
) conductors and 1/4 in. (6 mm) ferrule ends
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–20
Electric Damper Actuators
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring-Return
Actuators (Continued)
Technical Specifications
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring-Return Actuators
Power Requirements M910x-AGA-xS AC 24 V 25%/-20% at 50/60 Hz, 2.1 VA Supply, Class 2, Safety Extra-Low Voltage (SELV)
M9104-IGA-xS AC 24 V 25%/ -20% at 50/60 Hz, 3.0 VA Supply, Class 2, SELV
M9104-GGA-xS AC 24 V 25%/-20% at 50/60 Hz, 3.6 VA Supply, Class 2, SELV
Control Type M910x-AGA-xS Floating Control without Timeout
M9104-IGA-xS Floating or On/Off Control with Timeout
M9104-GGA-xS Proportional Control
Input Signal M910x-AGA-xS AC 24 V 25%/-20% at 50/60 Hz, Class 2, SELV without T imeout
M9104-IGA-xS AC 24 V 25%/ -20% at 50/60 Hz, Class 2, SELV with Timeout
M9104-GGA-xS 0(2) to 10 VDC or 0(4) to 20 mA with Field Furnished 500 Ohm Resistor
Feedback Signal M9104-GGA-2S 0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA)
Motor Input Impedance 200 Ohms Nominal
Running Torque M9102 Series 18 lb·in (2 N·m)
M9104 Series 35 lb·in (4 N·m)
Travel Time M9102 Series 30 Seconds at 60 Hz (36 Seconds at 50 Hz) for 90°of Rotation
M9104 Series 60 Seconds at 60 Hz (72 Seconds at 50 Hz) for 90° of Rotation
Rotation Range 93° 3°, CW or CCW
Cycles 100,000 Full Stroke Cycles;
Audible Noise Rating 35 dBA Nominal at 39-13/32 in. (1 m)
Electrical Connections M9102-AGA-2S
M9104-xGA-2S
M9102-AGA-3S,
M9104-xGA-3S
Mechanical Connections Up to 1/2 in. (13 mm) Diameter Round Damper Shaft or 3/8 in. (10 mm) Square Damper Shaft
Enclosure M9102-AGA-2S,
M9104-xGA-2S
M9102-AGA-3S,
M9104-xGA-3S
Ambient Conditions Operating -4 to 140°F (-20 to 60°C); 90% RH Maximum, Noncondensing
Storage -20 to 150°F (-29 to 66°C); 90% RH Maximum, Noncondensing
Compliance United States UL Listed, File E27734, CCN XAPX (United States) and XAPX7 (Canada)
Europe CE Mark - Johnson Controls, Inc. declares that this product is in complia nce with the essential requirement s and
Australia and New
Zealand
Shipping Weight 1.0 lb (0.5 kg)
Corresponds to Input Signal Span Selection
2,500,000 Repositions at Rated Running Torque
48 in. (1.2 m) UL 444 Type CMP Plenum Rated Cable with 19 AWG (0.75 mm
Ferrule Ends
M3 Screw Terminals
NEMA 2, IP42
NEMA 1, IP40
Actuator Housing is Plenum Rated per CSA C22.2 No. 236/UL 1995, Heating and Cooling Equipment
other relevant provisions of the EMC Directive 2004/108/EC.
C-Tick Mark Australia/NZ Emissions Compliant
2
) Conductors and 1/4 in. (6 mm)
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
V–21
Loading...