How it Works
Johnson Controls
Loading...
M9102-AGA-2S Series
Catalog Page
3 pgs68.24 Kb0

Johnson Controls M9102-AGA-2S Series, M9104-xxA-2S Series, M9104-xxA-3S Series Catalog Page

Download
M9102 Series Electric
Non-Spring Return Actuator
M9102/M9104 Series Electric Non-Spring Return Actuator
Dimensions, in. (mm)
(5)
1-13/32
(36)
(28)
2-13/16
(71)
4-3/32
(104)
5-5/32
(131)
2-1/4
(57)
(52)
1-1/4
(32)
25/32
(20)
Set Screw
Radius
Clearance
Code No. LIT-1900247 Issued February 12, 2015
M9102-AGA-2S, -3S and M9104-xxA-2S, -3S Series Electric Non-Spring Return Actuators
Description
All models are compact in size and are easily installed on VAV boxes, Variable Air Volume and Temperature (VVT) two-position zone applications, or small- to medium-sized dampers with a round shaft up to 1/2 in. (13 mm) in diameter or a 3/8 in. (10 mm) square shaft.
The M9102 Series Electric Non-Spring Return Actuators provide a running torque of 18 lb·in (2 N·m), and the nominal travel time is 30 seconds at 60 Hz (36 seconds at 50 Hz) for 90° of rotation. The M9104 Series Electric Non-Spring Return Actuators provide a running torque of 35 lb·in (4 N·m), and the nominal travel time is 60 seconds at 60 Hz for 90° of rotation.
Refer to the M9102-AGA-2S, -3S and
M9104-xGA-2S, -3S Series Electric Non-Spring-Return Actuators Product Bulletin (LIT-1201742) for important product
application information.
Features
• Two Torques Available: 18 and 35 lb·in (2 and 4 N·m)
• Short 30-Second Travel Time Available
• 35 dBA Maximum Audible Noise Rating at 1 Meter
• Synchronous Drive (AGA, IGA, GGA models)
• 100,000 Cycle Rating
• Direct Shaft Mounting with Single-Screw Coupler
• Magnetic Clutch
• Manual Gear Release
• Plenum Cable or Screw Terminal Electric Connections
• Floating, Floating with Timeout, and Proportional 0(4) to 10 VDC Control Inputs Available
• Small, Compact Design
Applications
The M9102 and M9104 Series Electric Non-Spring Return Actuators are designed to position balancing, control, round, and zone dampers in HVAC systems. These electric actuators are also designed to position blades in a VAV box, or they can be used in VVT two-position zone applications.
Each actuator mounts directly to the surface in any convenient orientation using a single No. 10 standard sheet metal screw (included with the actuator). No additional linkages or couplers are required. Electrical connections on the actuator are clearly labeled to simplify installation.
Repair Information
If the M9102 or M9104 Series Electric Non-Spring Return Actuator fails to operate within its specifications, replace the unit. For a replacement electric actuator, contact the nearest Johnson Controls® representative.
2-1/16
1-3/32
9/16 (14)
3/16
m
i d _
t c a
: G
I F
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.
www.johnsoncontrols.com
1
M9102-AGA-2S, -3S and M9104-xxA-2S, -3S Series Electric Non-Spring Return Actuators (Continued)
Selection Chart
Code Number Control Type Running
Torque
M9102-AGA-2S Floating 18 lb·in (2
M9102-AGA-3S Floating 18 lb·in (2
M9104-AGA-2S Floating 35 lb·in (4
M9104-AGA-3S Floating 35 lb·in (4
M9104-IGA-2S Floating or On/Off 35 lb·in (4
M9104-IGA-3S Floating or On/Off 35 lb·in (4
M9104-GGA-2S Proportional 35 lb·in (4
M9104-GGA-3S Proportional 35 lb·in (4
M9104-IUA-2S Floating or On/Off 35 lb·in (4
N·m)
N·m)
N·m)
N·m)
N·m)
N·m)
N·m)
N·m)
N·m)
Travel Time Power
Supply (VA rating)
30 Seconds at 60 Hz 36 Seconds at 50 Hz
30 Seconds at 60 Hz 36 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 60 Hz 72 Seconds at 50 Hz
60 Seconds at 50/60 Hz7.5
2.5 48 in. (1.2 m) UL 444 Type CMP Plenum Rated
2.5 M3 Screw Terminals
2.1 48 in. (1.2 m) UL 444 Type CMP Plenum Rated
2.1 M3 Screw Terminals
3.0 48 in. (1.2 m) UL 444 Type CMP Plenum Rated
3.0 M3 Screw Terminals
2.9 48 in. (1.2 m) UL 444 Type CMP Plenum Rated
2.9 M3 Screw Terminals
(0.07A)
Electrical Connections
cable with 19 AWG (0.75 mm .25 in. (6 mm) ferrule ends
cable with 19 AWG (0.75 mm .25 in. (6 mm) ferrule ends
cable with 19 AWG (0.75 mm .25 in. (6 mm) ferrule ends
cable with 19 AWG (0.75 mm .25 in. (6 mm) ferrule ends
48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable with 18 AWG (1.02 mm2) conductors for 3/8 in. (10 mm) flexible metal conduit
2
) conductors and
2
) conductors and
2
) conductors and
2
) conductors and
Accessories
Code Number Description
1
DMPR-KC003 DMPR-KR003
M9000-200 Commissioning tool that provides a control signal to drive 24 V on/off, floating, proportional, and/or resistive electric actuators M9104-100 Connector for 3/8 in. (10 mm) flexible metal conduit
1. Furnished with the damper and may be ordered separately.
7 in. (178 mm) blade pin extension without bracket for Johnson Controls direct-mount damper applications
1
Sleeve pin kit for Johnson Controls round dampers with a 5/16 in. (8 mm) diameter shaft
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult the local Johnson Co ntrols office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.
www.johnsoncontrols.com
2
M9102-AGA-2S, -3S and M9104-xxA-2S, -3S Series Electric Non-Spring Return Actuators (Continued)
Technical Specifications
Power Requirements M910x-AGA-xS AC 24 V +25%/-20% at 50/60 Hz, 2.1 VA, Class 2, Safety Extra-Low Voltage (SELV)
M9104-IGA-xS AC 24 V +25%/-20% at 50/60 Hz, 3.0 VA, Class 2, SELV M9104-GGA-xS AC 24 V +25%/-20% at 50/60 Hz, 2.9 VA, Class 2, SELV M9104-IUA-2S AC 100 to 240 V (-15%+10%) at 60 Hz, 0.07A, and 7.5 VA Supply
Control Type M910x-AGA-xS Floating Control without Timeout
M9104-IGA-xS Floating or On/Off Control with Timeout M9104-GGA-xS Proportional Control M9104-IUA-2S Floating or On/Off Control with Timeout
Input Signal M910x-AGA-xS AC 24 V +25%/-20% at 50/60 Hz, Class 2, SELV without Timeout
M9104-IGA-xS AC 24 V +25%/-20% at 50/60 Hz, Class 2, SELV with Timeout M9104-GGA-xS 0(2) to 10 VDC or 0(4) to 20 mA with Field-furnished 500 ohm Resistor M9104-IUA-2S AC 100 to 240 V (-15%+10%) at 50/60 Hz, and 7.5 VA Supply
Feedback Signal M9104-GGA-2S 0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA)
Motor Input Impedance 200 ohms Nominal Running Torque M9102 Series 18 lb·in (2 N·m)
M9104 Series 35 lb·in (4 N·m)
Travel Time M9102 Series 30 Seconds at 60 Hz (36 Seconds at 50 Hz) for 90° of Rotation
M9104 Series 60 Seconds at 60 Hz (72 Seconds at 50 Hz) for 90° of Rotation M9104 (IUA) 60 Seconds at 50/60 Hz for 90° of Rotation
Rotation Range 93° ±3°, CW or CCW Cycles 100,000 Full Stroke Cycles;
Audible Noise Rating 35 dBA at 39-13/32 in. (1 m) Maximum Electrical Connections M9102-AGA-2S
Mechanical Connections Up to 1/2 in. (13 mm) Diameter Round Damper Shaft or 3/8 in. (10 mm) Square Damper
Enclosure M9102-AGA-2S
Ambient Conditions Operating -4 to 140°F (-20 to 60°C); 90% RH Maximum, Noncondensing
Compliance United States UL Listed, CCN XAPX, File 27734
Shipping Weight 1.0 lb (0.5 kg)
M9104-xxA-2S M9102-AGA-3S
M9104-xGA-3S M9104-IUA-2S 48 in. (1.2 mm) with 18 AWG (1.02 mm
M9104-xxA-2S M9102-AGA-3S
M9104-xxA-3S
Storage -20 to 150°F (-29 to 66°C); 90% RH Maximum, Noncondensing
Canada cUL Listed, CCN XAPX7, File 27734
Europe Johnson Controls, Inc. declares that this product is in compliance with the essential
Australia and New Zealand
Corresponds to Input Signal Span Selection
2,500,00 Repositions at Rated Running Torque
48 in. (1.02 m) UL 444 Type CMP Plenum Rated Cable with 18 AWG (1.02 mm) Conductors and 1/4 in. (6 mm) Ferrule Ends
M3 Screw Terminals
2
Flexible Metal Conduit
Shaft NEMA 1, IP42
NEMA 1, IP40
Plenum rated, UL2043, suitable for use in other environmental spaces (plenums) in accordance with section 300.22.(c) of the National Electrical Code
Plenum Rated Per CSA 22.2 No. 236/UL 1995, Heating and Cooling Equipment
requirements and other relevant provisions of the EMC Dire ctive 2004/108/EC and t he Low Voltage Directive 2006/95/EC.
C-Tick Mark, Australia/NZ Emissions Compliant
) Conductors and Connector for 3/8 in. (10 mm)
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult the local Johnson Co ntrols office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.
www.johnsoncontrols.com
3
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use