J Series Electric Zone Valves for Assembly in the Field
Code No. LIT-1924210
Issued January 2, 2014
Description
J Series Electric Zone Valves accurately
control the flow of saturated steam, hot water,
and chilled water through coils and heat
exchangers of all types, in a wide range of
HVAC applications. The spring-return,
two-position design with synchronous motor
has proven reliable in millions of installations
worldwide. The actuator can be removed from
the valve quickly and easily, simplifying
installation and servicing. No special linkage
kit or commissioning is required.
Refer to the J Series Zone Valves Product Bulletin (LIT-977282) for important product
application information.
Features
• high closeoff pressure actuator option
satisfies demanding requirements of
high-rise buildings and high-pressure
pumping systems
• interchangeable actuators allow field
conversion from normally open to normally
closed without re-piping
• choice of end connections provides
increased versatility and replacement
capability
Repair Information
If the J Series Zone Valve fails to operate
within its specifications, replace the valve
body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls® representative.
• quick and simple actuator removal eases
installation and provides quick actuator
replacement during service
• bubble-tight shutoff conserves energy and
accurately controls zone temperature for
increased comfort
Selection Charts
J Series On/Off Valves — Standard Closeoff (Part 1 of 2)
Size, In.CvCloseoff, psig Valve — End ConnectionsActuators
NPT Sweat Inverted Flare AC 24 VAC 120 VAC 208 VAC 230 V
Two-Way, Spring Closed, Standard Temperature (32 to 200°F, 32 to 104°F Ambient)
J Series Electric Zone Valves for Assembly in the Field (Continued)
Technical Specifications
J Series Electric Zone Valves for Assembly in the Field
1
Service
End ConnectionsThreaded (NPT), Sweat (All Models)
Fluid Temperature
Limits
Valve Body Pressure Rating300 psig (2,067 kPa) System Operating Pressure
Cycle TimesJT or JS SeriesBubble-Tight Shutoff
MaterialsBodyForged Brass
Control SignalJS and JT SeriesAC 24 V, 120 V, 208 V or 230 V, Two-Wire On/Off
Control ActionJM SeriesP Type Proportional Control
Input ImpedanceJM SeriesP Type Proportional Control; Voltage Input: 200,000 Ohms; Current Input: 300 Ohms
Agency ApprovalAll Actuators UL Listed, File E6688 or E27734
Power RequirementsJS/JT SeriesAC 24 V, 60 Hz (6.5 W), 7 VA
Electrical Connections JS/JT Series18 in. (457 mm) Wire Leads
Shipping WeightJS/JT Series1.0 lb (454 g), Maximum Actuator and Valve Body
1. Proper water treatment is recommended; refer to the VDI 2035 Guideline.
JT Series 32 to 200°F (0 to 93°C) Water in Ambient Temperatures of 32 to 104°F (0 to 40°C)
JS Series32 to 250°F (0 to 121°C) Water in Ambient Temperatures of 32 to 169°F (0 to 76°C)
JM Series32 to 200°F (0 to 93°C) Water in Ambient Temperatures of 32 to 125°F (0 to 52°C)
JM Series0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
StemBrass (Hard Chrome Plated)
Base Plate and Bearing PlateStainless Steel
Actuator Housing