FX-WRZTTB00-5 Handheld Temperature Room Sensor
FX-WRZ Series Wireless Room Sensors
Code No. LIT-1900868
Issued January 14, 2014
Description
The FX-WRZ Handheld Temperature Room
Sensor is designed to sense room and zone
temperature and transmit wireless
temperature control data. The sensor needs to
be securely mounted with its tether cord to an
object that remains in the room. Mounting the
sensor to the head wall system with the tether
cord is the preferred method.
In an FX-ZFR Series Wireless Field Bus
System application, the sensors communicate
wirelessly with FX-PC Series Controllers by
means of the FX-ZFR1811 Router.
In wired field bus applications, the sensors
communicate with an FX-WRZ78xx Wireless
Receiver. The FX-WRZ78xx Receiver
transfers data to the controller by means of the
Sensor Actuator (SA) communication bus. In a
typical application, one FX-WRZ Series
Sensor reports to one FX-WRZ78xx Receiver,
but up to five FX-WRZ Series Sensors can be
associated with a single FX-WRZ78xx
Receiver for multi-sensor averaging or
high/low temperature selection.
The FX-WRZ Handheld Temperature Room
Sensor comes with an LCD. The FX-WRZ
Sensor can transmit sensed temperature,
setpoint temperature, occupancy status,
signal strength, and low battery conditions to
an associated router or receiver. The FX-WRZ
Sensor is designed for indoor, intra-building
applications only.
The FX-WRZ Sensor uses direct-sequence,
spread-spectrum RF technology, and
operates on the 2.4 GHz Industrial, Scientific,
and Medical (ISM) band. The receiver meets
the IEEE 802.15.4 standard for low power, low
duty cycle RF transmitting systems.
Refer to the FX-WRZTTB00-5 Handheld
Temperature Room Sensor Product Bulletin
(LIT-12011898) for important product
application information.
Features
• Flexible Installation and Relocation
• Easy-to-Clean Plastic Surface
• Reduced Labor Costs
• Intuitive Temperature Selection Interface
• LCD Temperature Display
• High-Accuracy Temperature Sensor
• Wireless Signal Strength and Low Battery
Condition Mapping
• Optional, Battery-Powered
FX-WRZSST-120 Wireless System Survey
Tool
Repair Information
If the FX-WRZ Wireless Room Sensor fails to
operate within its specifications, replace the
unit. For a replacement sensor, contact the
nearest Johnson Controls® representative.
Accessories Ordering Information
Code Number Product Description
FX-WRZSST-120 Wireless Sensing System Tool: For Use with an FX-WRZ Handheld Temperature Room Sensor, to Function as a Site Survey Tool for
T-4000-119 Allen-Head Adjustment Tool: 1/16 in. (1.6 mm), 30 Tools per Bag
the FX-WRZ78xx-0 One-to-One Room Temperature Sensing System, or for the FX-ZFR1800 Wireless Field Bus System
Technical Specifications
FX-WRZTTB00-5 Handheld Temperature Room Sensor (Part 1 of 2)
Product Description Handheld Temperature Sensor with Display, Temperature In crease and Decr ease Buttons, Tether Cor d, and Manual Occupancy
Power Requirements 3 VDC Supplied by Two 1.5 VDC AA Alkaline Batteries (Included with Sensor);
Addressing DIP Switches, Field Adjustable.
Ambient Conditions Operating: 32 to 122F (0 to 50C), 5 to 95% RH, Noncondensing
Wireless Band Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Band
Transmission Power 10 mW Maximum
Transmission Range 100 ft (30 m) Maximum Line of Sight;
Transmissions Every 60 Seconds (±20 Seconds)
Temperature System Accuracy 1.0F0.6C Over the Range of 55 to 85F (13 to 29C);
Temperature Sensor Type Internal 10k ohm Negative Te m pe r a tu r e C o ef fi ci e n t (N TC) Thermistor
Materials NEMA 1 White Plastic Housing
Dimensions 4.7 x 3.1 x 1.5 in. (120 x 80 x 38 mm)
Shipping Weight 0.3 lb (0.14 kg)
Override Button
Typical Battery Life:48 Months (36 Months Minimum)
MS/TP Address, Network Number, and Zone Address
Storage: -40 to 160F (-40 to 71C), 5 to 95% RH, Noncondensing
50 ft (15 m) Recommended
1.5F0.9C Over a Range of 32 to 55F (0 to 13C)and85to110F (29to43C)
The performance specifications are nomina l and conf orm to accep table industr y standar ds. For ap plications a t condition s beyond th ese specification s, consult the local Johnson Controls o ffice.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
1
FX-WRZTTB00-5 Handheld Temperature Room Sensor (Continued)
FX-WRZTTB00-5 Handheld Temperature Room Sensor (Part 2 of 2)
Compliance United States:
Transmission Complies with FCC Part 15.247 Regulations for Low Power Unlicensed Transmitters
Transmitter FCC Identification: TFB-MATRIXL or OEJ-WRZRADIO
Canada:
Industry Canada IC: 5969A-MATRIXL or 279A-WRZRADIO
Europe:
CE Mark – Johnson Controls, Inc. declares that this product is in compliance wi th the essent ial requir ement s and oth er re levant
provisions of the R&TTE Directive 1999/05/EC.
Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant
Japan: Transmission complies with Article 38-24 Paragraph 1 of the Radio Law Certification Number: ATCB012834
The performance specifications are no minal and co nform t o acceptab le ind ustry standar ds. For appl ications at condition s beyond these specifica tions, consult the local Johnson Co ntrols office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
2