Johnson Controls DPT 209 Catalog Page

Model DPT 209 Transducer

Now Available!

Gauge Pressure

Range: 0 to 1 psig up to 0 to 10,000 psig

Applications

● Industrial OEM

Equipment

● Hydraulic Systems

COMPOUND

VACUUM

RANGES

etra Systems Model 209 pressure transducers have been designed

specifically for industrial applications with demanding price and performance requirements. The 209 offers exceptional reliability in typical industrial grade environments. Standard features tailor the Model 209 for applications with more extreme environmental conditions or more stringent performance needs. The Model 209 offers unparalleled performance in a configurable transducer designed specifically for the budget conscious OEM.

NOTE: Setra quality standards are based on ANSI-Z540-1. The calibration of this product is NIST traceable.

Pressure Ranges

Full Scale Range Proof Pressure Burst Pressure

1 2 250 2 4 250 5 10 250 10 20 500 25 50 500 50 100 750 100 200 1000 200 400 2000 250 500 2000 500 1000 3000 1000 2000 5000 2000 3000 6500 3000 4500 7500 5000 7500 10,000 10,000 12,500 20,000

Setra's proven center mount electrode configuration is the heart of this simple, yet industrialized, design. A 17-4 PH stainless steel sensor and a rigid stainless steel electrode form the variable capacitor.

Setra 209 transducers are packaged in rugged stainless steel/Valox housings, which are small and lightweight for optimum compatibility with system designs. As a totally self - contained electronic package, the 209 stainless steel capacitance sensing element, coupled with a high level output IC-based circuit, assures excellent accuracy and long term stability.

● Compressor Control

● HVAC/R Equipment

● Industrial Engines

● Process & Containerized

Refrigeration Systems

Benefits

■ Unparalleled Price/

Performance

■ Rugged Design Survives

Harsh Environments

■ Operates Over a Wide

Temperature Band

■ Compatible with Wide

Range of Gases & Liquids

■ Operates on Low Cost

Unregulated DC Power

■ Suitable for High Shock

& Vibration Applications

■ No Seals or "O" Rings to

Cause Leakage

■ No Brazed Joints

Susceptible to Corrosion Problems

■ 3 to 5 Day Shipment for

Small Quantities, Standard Configurations

ISO

9001

✓

Certified

Model DPT 209 Specifications

Performance Data

Accuracy RSS* (at constant temp) ±0.25% FS Non-Linearity (BFSL) ±0.22% FS

Hysteresis 0.10% FS Non-Repeatability 0.05% FS Thermal Effect Compensated Range °F (°C) -4 to +176 (-20 to +80) Zero Shift %FS/100°F (%FS/50°C) 2.0 (1.8)

Span Shift %FS/100°F (%FS/50°C) 1.5 (1.3) Warm-up Shift ±0.1% FS total

Response Time 5 milliseconds Stability 0.5% FS/Year

*RSS of Non-Linearity, Non-Repeatability and Hysteresis.

Environmental Data

Temperature Operating °F (°C) -40 to +260 (-40 to +127) Storage °F (°C) -40 to +260 (-40 to +127)

Vibration

Shock

20g 200g

Environmental Protection Weather Resistant

*MIL-STD 202, Method 204, Cond. C **MIL-STD 202, Method 213B, Cond. C

Outline Drawings

Electrical Data (Voltage)

Circuit 3-Wire (Com, Out, Exc) Excitation 9 to 30 VDC Output

0.5 to 5.5 VDC

Output Impedance 10 ohms

*Calibrated into a 50K ohm load, operable into a 5000 ohm load or greater. **Zero output factory set to within ±50mV. **Span (Full Scale) output factory set to within ±50mV. Note: Other outputs are available with 9 to 30 VDC excitation. An output of 0.5 to

4.5 VDC output is available with 15 VDC excitation.

Electrical Data (Current)

Circuit 2-Wire

Output

4 to 20 mA External Load 0 to 800 ohms Minimum supply voltage (VDC) = 9 + 0.02 x (Resistance of receiver plus line). Maximum supply voltage (VDC) = 28 + 0.004 x (Resistance of receiver plus line).

*Calibrated at factory with a 24 VDC loop supply voltage and a 250 ohm load. **Zero output factory set to within ±0.16mA. **Span (Full Scale) output factory set to within ±0.16mA.

Physical Description

Case Stainless Steel & Valox Sensor 17-4 PH Stainless Steel Electrical Connection 2 ft. multi-conductor cable Pressure Fitting

1/4" -18 NPT external,

17-4 PH Stainless Steel Vent Through cable Weight (approx.) 2.3 ounces (65 grams)

See ordering information for other fittings available (minimum quantities

apply).

Pressure Media

Liquids or gases compatible with 17-4 PH Stainless Steel*.

Note: Hydrogen not recommended for use with 17-4 PH Stainless Steel.

Specifications subject to change without notice.

1.40

2.4 61

2.0 51

Cable Anchor

.50

3/4” HEX

1/4” NPT

1.62 41

3.61 92

1.68 43

1.58

1.62

3/4” HEX

1/4” NPT

Conduit Version

Ordering Information

Product Codes-Cable Version

Input Range 0.5 to 5.5 VDC 4 to 20 mA

PSIG Output Output

0 to 5 DPT2090-5G DPT2091-5G 0 to 10 DPT2090-10G DPT2091-10G 0 to 25 DPT2090-25G DPT2091-25G 0 to 50 DPT2090-50G DPT2091-50G 0 to 100 DPT2090-100G DPT2091-100G 0 to 250 DPT2090-250G DPT2091-250G 0 to 500 DPT2090-500G DPT2091-500G 0 to 1000 DPT2090-1000G DPT2091-1000G

Input Range 0.5 to 5.5 VDC 4 to 20 mA

PSIG Output Output

0 to 5 DPT2090C-5G DPT2091C-5G 0 to 10 DPT2090C-10G DPT2091C-10G 0 to 25 DPT2090C-25G DPT2091C-25G 0 to 50 DPT2090C-50G DPT2091C-50G 0 to 100 DPT2090C-100G DPT2091C-100G 0 to 250 DPT2090C-250G DPT2091C-250G 0 to 500 DPT2090C-500G DPT2091C-500G 0 to 1000 DPT2090C-1000G DPT2091C-1000G

Compound Compound

-14.7 to 30 DPT2090-30C DPT2091-30C -14.7 to 30 DPT2090C-30C DPT2091C-30C

-14.7 to 100 DPT2090-100C DPT2091-100C -14.7 to 100 DPT2090C-100C DPT2091C-100C

Product Codes-Conduit Version

SSP 209/C209JCI-2pg. Rev.D 06/13/01

Vacuum Vacuum

14.7 PSIV DPT2090-14.7V DPT2091-14.7V 14.7 PSIV DPT2090C-14.7V DPT2091C-14.7V

Add DPT-CAL-CERT for Calibration Certificate