Johnson Controls A19AAC-9005, A19AAC-9124, A19AAC-9127, A19AAC-9009, A19AAC-9107 Product Bulletin
...
European Refrigeration Controls Catalogue
Catalog Section 1
Product Bulletin A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc. Catalogue Section 1
Order No. PD -A19A-E
PSC9705
I
ntroduction
These thermostats are designed for
refrigeration, cooling, heating, ventilation and
air-conditioning applications. Standard models
are provided for remote sensing or room
sensing. Models with manual reset are
available for low or high limit functions.
D
escription
These thermostats are available with fixed or
adjustable differential. The various control
ranges cover a broad range of temperature
applications with a minimum number of models.
On request a built-in high or low limit stop is
possible and can be adjusted quickly and easily
in the field. All models have a universal way of
adjustment. For this purpose a knob and sealing
cap are enclosed.
All A19 style 1 wholesaler code models have a
bulb clamp plus screw also enclosed.
A19A capillary thermostat
A19B space thermostat
Feature and Benefits
Liquid filled sensing element
No cross ambient temperature problems
Contact differential over the whole range
Dust tight Penn switch Prevents pollution of the contacts by
electrostatic influences.
Trip free manual reset Override is not possible in the control function
Front adjustment Less mounting space required.
Series A19A/A19B/A19D
Thermostats for Refrigeration, Cooling, Heating, Ventilation
and Air-conditioning
A19A
Issue 03/03/2003
Catalogue Section 1 © 2003 Johnson Controls Inc.
Order No. PD-A19A-E
2
N
ote
These controls are designed for use only
as operating controls. Where an operating
control failure would result in personal injury
or loss of property it is the responsibility of
the installer to add devices or systems that
protect against, or warn of, control failure.
SPDT contacts are standard on all models.
Instruments have compact sizes. Types
A19ACC and A19ADC have a trip-free manual
reset . Reset button must be pressed and
released. Contact cannot be blocked in closed
position. All types have VDE and SEV approval.
To facilitate ordering, wholesaler codes have
been added on some universal models.
All models are provided with a separate knob
and sealing cap.
T
ype number matrix
A19 AAC capillary thermostat, fixed differential.
A19 AAF capillary thermostat, special close
fixed differential.
A19ABC capillary or immersion thermostat,
adjustable differential.
A19ACC capillary thermostat, lock-out low
with manual reset.
A19ADC immersion thermostat, lock-out high
with manual reset.
A19BAC space thermostat, fixed differential.
A19BBC space thermostat, adjustable
differential.
A19DAC strap-on thermostat.
A19DAF strap-on thermostat
A
djustment
1. Models “set low” (refer to cover label)
The dial indicates the low switch point
(1 - 2 open, 1 - 3 closed).
The high switch point (1 - 2 closed,
1 - 3 open) is obtained by adding the
differential to the low switch point.
2. Models “set high” (refer to cover label)
The dial indicates the high switch point
(1 - 2 closed, 1 - 3 open). The low switch
point (1 - 2 open, 1 - 3 closed) is obtained by
deducting the differential from the high switch
point.
Exception: Type A19ADC, dial indicates high
switch point ( 1 - 3 closed, 1 - 2 open).
N
ote
The standard screwdriver adjustment can
be converted easily in the field to knob
adjustment. Also concealing of adjustment
and scale is possible after installation.
C
ontact functions
Types A19AAC,
A19 AAF, A19ABC,
A19BAC, A19BBC,
A19DAC
Fig. 1
1-2 closes on temperature increase
Type A19ACC
Fig. 2
1-2 opens on temperature decrease
Type A19ADC
Fig.3
1-2 opens on temperature increase
R
epair and replacement
Repair is not possible. In case of an improperly
functioning control, please check with your
nearest supplier. When contacting the supplier
for a replacement you should state the
type/model number of the control. This number
can be found on the data plate or cover label.
1
23
θ
>
1
23
θ
<
1
23
θ
>
A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc.
Catalogue Section 1
Order No. PD-A19A-E
3
S
ensor styles
Fig. 4
Style 1a (drawn bulb)
Fig.5
Style 1b swaged bulb, can be used with
closed-tank connector FTG13A-600
½" x 14 NPT
33.3 60
Fig. 6
Style 4h
½" x 14 NP T
58.3
60
Fig. 7
Style 2
Fig. 8
Style 20
Fig. 9
Style 3 (coil)
B
ulb size and finish, bulb wells
Range (°C) Style Bulb size
(mm)
Finish Bulb well (optional)
-35 to +10 1b 9.5 x 110 Tin-plated WEL14A602R
-35 to +10 3 - Stainless Steel -
-5 to +28 1b 9.5 x 135 Tin-plated WEL14A603R
-5 to +28 3 - Stainless Steel -
-35 to +40 1b 9.5 x 110 Tin-plated WEL14A602R
-35 to +40 3 - Stainless Steel 0 to 13 1a 9.3 x 80 - WEL16A601R
0 to 43 3 - Stainless Steel 1 to 60 1b 9.5 x 115 - WEL14A602R
5 to 32 1b 9.5 x 155 Tin-plated No bulb well available
10 to 95 1a 7.4 x 75 - WEL11A601R
40 to 120 1b 9.5 x 100 - WEL14A602R
35 to 150 1a 5 x 265 - No bulb well or closed tank
connector possible
90 to 290 1a 5 x 155 - No bulb well or closed tank
connector possible
Loading...