JOHNSON XIR, XER User Manual
MX17_XR-XER-XIR_r1_3_D.indd 1 5/8/17 11:09 AM
A
F
XR
ENGLISH
K
J
B
I
EE
H
C
D
G
58 59
MX17_XR-XER-XIR_r1_3_D.indd 58-59 5/8/17 11:09 AM
;5&2162/('(6&5,37 ,21
Note: There is a thin protective sheet of clear plastic on the overlay
of the console that should be removed before use.
A) /&'',63/$<:,1'2:Displays workout feedback, program profile and more.
B) *23$86(
C) 6723
D) ENTER
E) $552:6
F) 180%(5.(<3$' Used to enter xID login, to enter program
G) BACK
H) :,),&211(&76<1& Press to connect your wireless internet
I) 3$663257&211(&76<1& Press to connect your Passport
J) ENERGY SAVER LIGHT: Indicates if machine is in energy
K) READING RACK: Holds reading material or electronic device.
: Press to start, pause or resume your workout.
: Press to stop your workout. Press and
hold for 3 seconds to reset console.
: Confirm each program setting. Press to change
display feedback during workout. Press and hold to scan.
: used to adjust program settings.
data during program setup and to adjust speed / resistance
level during workout. Press
: Go to previous program setting.
connection. See BEFORE YOU BEGIN section for more info.
box for Virtual Active programming. Passport Player is sold
at your Retailer or at www.passportplayer.com
saver mode. Press any key to wake up the machine.
to confirm setting.
AL MK
;5',63/$<'(6&5,37,21
A) TIME: Is always shown in the larger central portion of the display. Shown as minutes
: seconds. View the time remaining or the time elapsed in your workout.
B) INCLINE: Shown as percent. Indicates the incline of your walking
or running surface (Treadmills and Ascents only).
C) DISTANCE: Shown as Miles or Kilometers* based on your default setting.
Indicates distance traveled or distance remaining during your workout.
D) 63((': Shown as MPH or KPH* based on your default setting.
Indicates how fast the footpads/pedals are moving.
E) &$/25,(6: Total calories burned or calories remaining to burn during your workout.
F) HEART RATE: Shown as BPM (beats per minute). Used to monitor your heart rate (when
wearing a wireless heart rate strap or when contact is made with both pulse grips).
G) RESISTANCE(RES): Shows the current resistance level (Bikes, Ellipticals, Ascents only).
H) 530: Revolutions Per Minute (Bikes, Ellipticals, Ascents only).
I) :$776: Displays current user power output (Bikes, Ellipticals, Ascents only).
J) 3$& (: Indicates how many minutes it takes to complete a mile
based on your current speed (Treadmills only).
K) 352*5$0352),/(: The dot matrix will show the program profile
as you progress through wour workout. Profile represents incline,
resistance or speed (depending on model type and workout type).
L) 3$663257: Indicates Passport box connection is present.
M) :,),: Indicates wireless connection is present and the strength
(low, medium, high). Flashes when Wi-Fi is trying to connect.
* Default is set during console install. If logged in with xID, the default is set by user profile.
%()25(<28%(*,1
,1,7, $/6(783
When you power on the console for the first time
you will be prompted to perform initial setup.
Plug in the power cord and turn the equipment ON (Note:
Some equipment does not have a power switch). TREADMILLS
ONLY: Insert the safety key into the safety keyhole.
1) Select your language and touch
2) Select your frame model number and touch
3) Select metric / standard and touch
to confirm.
to confirm.
to confirm.
XR
ENGLISH
;(5 ;,5&2162/('(6&5, 37,21
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should
be removed before use.
The XER and XIR has a fully integrated touch screen display. All information required for
workouts is explained on screen. Exploration of the interface is highly encouraged.
A) *2Press to begin a quick start program.
B) 352*5$0%877216 Press to select from a number of preset programs.
C) USER MENU: Select an existing User, Guest or Add User.
D) 86(56(783Allows you to edit User Information.
E) SETTINGS MENU: Access to Volume Controls, Bluetooth Pairing, Wi-Fi Setup, Sync
Passport, Machine defaults and more.
F) +($'3+21(-$&. Plug your headphones into the console to use them instead of
the console speakers.
G) $8',2,1 Plug your media player into the console using the included audio
adaptor cable.
H) ENERGY SAVER LIGHT: Indicates if machine is in energy saver mode. Press any key
to wake up the machine.
I) 86%3257 Access media from compatible devices, charging devices* and for
software updates.
J) 63($.(56Audio plays through the speakers.
K) READING RACK: Holds reading material or electronic device.
* Will not charge USB devices that draw more than 1 amp.
XER
XIR
ENGLISH
XR
ENGLISH
%()25(<28%(*,1
6(783;,'$&&2817)259,( :),7&211(&7, 9,7 <
Connect to VIEWFIT and discover a powerful new way to get more
results from your workouts, your tracking and your social networking.
Up to four users can be saved on a machine. This process is the
first step in connecting your equipment. It must be done from a
computer, tablet, or mobile device that is connected to the internet.
1) Visit the web site: www.viewfit.eu to create an account
and connect your console to home wireless network.
2) Click on Connect Your Equipment.
3) Sign In if you already have an xID account or Create
an Account by entering in your information.
4) Continue to follow the online instructions to complete the process
of connecting your console to your home wireless network.
5) Manage the console user accounts from your
Account Profile at www.viewfit.eu
Congratulations! You are now connected and ready to get started.
3$6632570(',$3/$<(5
The Passport player, featuring Virtual Active™ technology, is a highdefinition experience that uses real destination footage and matching
ambient sounds from stunning destinations around the world. The
ultimate in workout entertainment, Passport lets you escape the confines
of a regular workout routine while enjoying a dynamic experience.
A Passport player is available for purchase separately from your Matrix
Retailer. Additional courses are available from your Matrix Retailer.
For more information, go to: www.passportplayer.com
6<1&,1*&2162/(: ,7+3$663257
1) Use the arrow keys on the Passport remote to scroll to the setup icon
and press select.
2) Follow the on-screen prompts to press
3) The
icon (L) will flash while connecting and remain steady once it
has synced successfully.
NOTE: See PASSPORT OWNER’S MANUAL for more information.
on the equipment console.
GETTING STARTED
1) Check to make sure no objects are nearby that will
hinder the movement of the equipment.
2) Plug in the power cord and turn the equipment ON (Note:
Some equipment does not have a power switch).
75($'0,//621/<
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure
that it is secure and will not become detached during operation.
5) Insert the safety key into the safety keyhole.
$//02'(/6
6) Select User 1-4 that you linked your xID to in your user profile.
7) If prompted, enter your Passcode using the keypad then press
8) You are now logged into your xID.
$48,&.67$5783
Simply press to begin working out.
Time, distance, and calories will all count up from zero. OR...
%6(/(&7$352*5$0
1) Select a PROGRAM using and press .
2) Set workout program information using
after each selection. Press
to begin workout.
3) Press
),1,6+,1*<285:25.287
When your workout is complete, the display will flash “WORKOUT
COMPLETE” and beep. Your workout information will stay
displayed on the console for 30 seconds and then reset.
725(6(77+(&2162/(
Hold for 3 seconds.
and press
to go back a step in the setup.
C D E
.
A
K
FGH
B
I J
;,56+2:1
60 61
MX17_XR-XER-XIR_r1_3_D.indd 60-61 5/8/17 11:09 AM
%()25(<28%(*,1
,1,7,$/6(783
When you power on the console for the first time you
XER
will be prompted to perform initial setup.
XIR
1) Select your language and touch
ENGLISH
&211(&7:,),
2) Choose from the available wireless networks detected and shown on
screen. If you do not see your network, you can add it manually via the
OTHER option. If you do not want to set up Wi-Fi at this time, touch
3) Use the keyboard to enter your Wi-Fi network password. Touch
4) Wi-Fi connection status and signal strength will be indicated by
symbol in the upper right corner of the display.
the
02'(/6(783
5) Select your frame model number and touch
'$7($1'7,0(6(783
6) If the console has been connected to Wi-Fi, it will detect your
location and fill in time and date info automatically.
7) Change any time and date settings as desired and touch
6(783;,'$&&2817)259,( :),7&211(&7, 9,7 <
Creating an xID account will allow you to save and share workout data online at
www.viewfit.eu
Create and save up to four xID accounts directly from the console.
1) If you already have an xID, touch Log In. To continue
without creating an xID touch Skip xID.
2) Enter your phone number or another easy-to-remember 10-14
digit number. This will be your xID. Touch
3) Create an easy to remember 4-digit passcode. Touch
4) Enter your email address. This must be a unique email address. Touch
5) Fill in your profile information to finish the xID account
set up process. Touch
6) Confirm your information and select the I accept the terms and conditions
box to review the Terms and Conditions. Touch
7) Check the Share Information box to share your workouts to the VIEWFIT community.
to confirm.
to confirm.
to confirm.
to confirm.
to complete xID setup.
to confirm.
to confirm.
.
to confirm.
to confirm.
GETTING STARTED
1) Touch *2 to begin working out immediately. Or...
2) Touch the :25.287&$7(*25< button of your choice.
75($'0,// 621/<
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure that
it is secure and will not become detached during operation.
5) Insert the safety key into the safety keyhole.
352*5$06(783
3) After selecting a :25.287&$7(*25< button, select
one of the 352*5$06 listed to the left.
• For more information on a selected program, touch
• Use the 6/,'(5&21752/6 to adjust your program settings.
• Touch to open a keypad to enter numbers.
• Touch
4) Touch *2 to begin your workout.
to return to the *26&5((1.
),1,6+,1*<285:25.287
When your workout is complete, your workout information will continue to display
on the console for 2 minutes and then is automatically saved to VIEWFIT if xID Terms
and Conditions were accepted and you are logged in.
.
+20(6&5((1
• Touch to change :25.287)(('%$&. displays at the bottom of the screen.
• While using an app, touch
• Touch
to adjust 92/80(, pair a %/8(7227+ device or to
change $8',26285&( (Netflix, My Media, Virtual Active, etc.).
to increase or decrease the resistance level, speed or incline.
• Touch
to use the keypad to set resistance level,
• Touch
speed or incline. Press
• Touch
to change resistance level, speed or incline back to previous setting.
to temporarily pause your workout and touch to
• Touch
resume. While paused, touch
to increase or decrease the duration
• Touch
of your workout or workout goal.
• Touch
to enter cool down mode. Cool down lasts for five minutes while
reducing the workout intensity, allowing your body to recover from your workout.
to lock the screen. Touch it again to unlock
• Touch
the screen and allow screen touches.
to go back to the home screen.
to confirm change.
to end workout.
XER
XIR
ENGLISH
62 63
MX17_XR-XER-XIR_r1_3_D.indd 62-63 5/8/17 11:09 AM
Loading...