Johnson T8000E Owner's Manual

Download

Page 1

TREADMILL T8000E

JOHNSON HEALTH TECH. CO., LTD.

No.26, Ching Chuan Rd., Taya Hsiang, Taichung Hsien 428, Taiwan, R.O.C.

TEL: +886-4-25667100 FAX: +886-4-25601087

E-mail: sales@johnsonfitness.com

http://www.johnsonfitness.com

July 30, 07’

SAP#065923-A

OWNER'S MANUAL

Page 2

TABLE OF CONTENTS

JOHNSON TREADMILL T8000E

INSTRUCTION

IMPORTANT SAFETY INSTRUCTIONS

SETUP THE TREADMILL

• Getting Started

• Making A Choice Of Site

• Stabilizing The Johnson Treadmill

• Centering The Belt

• Electrical Power Requirement

• Grounding Instructions

• Antenna Or Cable TV (CATV) Connection

• RCA Connection

• Unpacking The Johnson Treadmill

ASSEMBLY

• Fasteners & Assembly Tools

• Assembly Instructions

SERIAL NUMBER LOCATION

USING THE WORKOUTS

• Display Console

• Display Descriptions

• Workout Parameter Prompts

• Workout Overviews

• Workout Tips

• Workout Setup Steps

• Using Fitness Networking

MANAGER'S CUSTOM MODE

• Manager Menu

• TV Setup

MAINTENANCE

• Recommended Cleaning Tips

• Centering The Belt

• Tensioning The Belt

• Maintenance Lamp

PRODUCT SPECIFICATIONS

• Model T8000E Specifications

Page 3

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

INSTRUCTION

This Owner’s Manual describes the functions of the following product: Johnson Fitness Treadmills – T8000E

See Product "Specifications" (Page 39) in this manual for product specific features, the Johnson Treadmill T8000E is intended for commercial use.

It is recommended that all users of Johnson Fitness exercise equipment should be informed of the following information prior to its use. When using the Johnson Treadmill, always follow basic precautions:

• To ensure your safety and to protect the unit, read all the instructions before assembling

and using the treadmill.

• To ensure the proper use and safety of the treadmill, make sure that all users read this manual. Please make this manual a part of your facility’s training program. Remind the users that before undertaking any fitness programme, they should obtain complete physical examinations from their physicians. If, at any time while exercising, the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he or she must stop immediately.

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE ALL INSTRUCTIONS before assembling or using this Johnson Treadmill. It is strongly recommended to take the following safety instructions.

• DANGER: To reduce the risk of electrical shock, always unplug the Johnson Treadmill before cleaning or attempting any maintenance activity.

• WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet.

• CAUTION: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working properly, or if it has been damaged or immersed in water. Return the treadmill to Johnson Fitness or authorized dealers for examination and repair.

• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Never place the power cord under carpeting or place any object on top of the power cord.

• Only use the power cord provided with your Johnson Treadmill. If the power cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a a similarly qualified person to avoid a hazard.

• To disconnect, turn the switch to the off position, then remove the plug from the outlet.

• Use this treadmill for its intended purpose as described in this manual. Do not use attachments that have not been recommended by the manufacturer.

• Never drop or insert any object into any opening in the product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Johnson Fitness or authorized dealers.

• Do not reach into, or underneath the unit or tip it on its side during operation.

• Keep hands and feet clear at all times from moving parts to avoid injury.

• Do not remove the treadmill motor cover or roller covers. Service should be performed only by an authorized service technician.

• Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Johnson Fitness or authorized dealers.

• Do not use the Johnson Treadmill outdoors, near swimming pools or in areas of high humidity.

• Do not operate where aerosol (spray) products are being used or when oxygen is being administered.

0302

Page 4

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

SETUP THE TREADMILL

• Be sure the emergency stop pull cord is clipped to user and in a proper placed position on the user before beginning any workout.

• Use the stationary handrails when mounting or dismounting the treadmill. Place the feet firmly on the right and left side platforms before the running belt begins moving (prior to a workout). Step onto the running belt when the speed is at or below 1.6 km/h (1 mph).

• Never mount or dismount the treadmill while the running belt is moving.

• Handrails may be held to enhance stability as needed, but are not for continuous use.

• Do not wear any clothing that might catch on any moving parts of this treadmill.

• Never walk or jog backwards on the treadmill.

• Do not use this product in bare feet. Do not wear shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

• Do not turn the belt by hand.

• Close supervision is necessary when used near children, invalids or disabled people.

• When the treadmill is in use, young children and pets should be kept at least 3 meters / 10 feet away.

• When it is necessary to immobilize the treadmill, set the display to read "SELECT PROGRAM". (Pressing the Emergency Stop key twice will immediately take the unit to this screen). Then hold down the "CH " and "VOL " keys at the same time. The treadmill will display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the "CH " and "VOL " keys. The treadmill will display "SELECT PROGRAM" again.

GETTING STARTED

Read the Owner’s Manual before setting up the Johnson Fitness Treadmill. Place the treadmill in where it will be used before beginning the setup procedure.

MAKING A CHOICE OF SITE

The site that you select for the treadmill should be well-lit and well ventilated. Locate the T8000E on a structurally solid and flat surface a few meters / feet from the wall or any equipment (Allow a distance of 21 centimeters, or eight inches, between the treadmill and other units on either side. Allow a distance of two meters, or six feet, from the rear of the treadmill to any object or surface.) If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base under the treadmill.

Please do not place the treadmill in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine. To make exercise a desirable daily activity for you, the treadmill should be in an attractive setting.

STABILIZING THE JOHNSON TREADMILL

After placing the unit in where it will be used, check its stability. If the treadmill is placed on a slightly uneven surface, adjusting the adjustable levelers located underneath the base frame can help, but will not compensate for extremely uneven surfaces. To adjust, loosen the nut, and turn the leveler until the rocking motion ceases, and both levelers rest firmly on the floor. Retighten the nut.

NOTE: It is extremely important that the levelers are correctly adjusted for proper operation. An unbalanced unit may cause striding belt misalignment. A bubble level is recommended

to ensure proper leveling.

000

0504

Page 5

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

VIDEO AUDIO-L AUDIO-R

C-SAFE

CENTERING THE BELT

After installing and leveling the treadmill, check the belt to ensure that it is tracking properly. The belt might need to be adjusted after the first two hours of use. If the belt needs to be adjusted, please see at the section of for details.

ADJUSTING THE BELT

MAINTENANCE

ELECTRICAL POWER REQUIREMENT

The Johnson Fitness Treadmill requires a dedicated line according to the electrical configurations listed in the chart below. It is particularly important that no sensitive electrical equipment, such as a computer or a TV, shares the same circuit.

Supply Voltage (VAC) Rated Current (Amps)

100

120

200

220

230

240+

Frequency (Hz)

50 / 60 Hz

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service provider

if you are in doubt as to whether or not the product is properly grounded. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty.

ANTENNA OR CABLE TV (CATV) CONNECTION

Connect your “F” type cable or antenna coaxial signal cable to the provided RF antenna adapter. Once you have connected the cable to the adapter, insert the connector.

NOTE: The TV aspect of the LCD Console can only receive an analog signal. Digital cable must be externally converted to an analog signal. A 75-ohm external antenna terminal for VHF/UHF (>43dBuV (@75ohm) or > 65.8dBm) TV signal input must be present before TV setup can occur.

RCA CONNECTION

If the treadmill would display DVD or VCR entertainment, it is able to connect the supplied RCA Audio/Video signal cable as follows: YELLOW: Composite Video Out on your DVD, VCR, etc. to the Composite VIDEO Input connector on the TV.

WHITE: Left Audio Output on your DVD, VCR, etc. to the AUDIO-L Input on the TV. RED: Right Audio Output on your DVD, VCR, etc. to the AUDIO-R Input on the TV.

GROUNDING INSTRUCTIONS

The Johnson Treadmill must be properly grounded. If the product malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current to reduce the risk of electrical shock. This product is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.

CATV CONNECTION

RCA CONNECTION

0706

Page 6

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

UNPACKING THE JOHNSON TREADMILL

The Johnson treadmill is carefully inspected before it is packaged. It is shipped in four pieces: the frame base, the upright console supports, the console, the foam rubber handles and the hardware kit. Carefully unpack the unit and dispose of the box material.

T8000E

CAUTION: This unit weighs 169 kg / 374 lbs. To avoid injury to the user and the unit, be sure to have proper assistance to remove and move the unit.

Frame Base

Console

Foam Rubber Handles

Console Supports

Hardware Kit

NOTE: In case any of these parts are missing from the package, please contact Johnson

Fitness or the local authorized dealers at once.

0908

Page 7

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

ASSEMBLY

FASTENERS & ASSEMBLY TOOLS

PARTS NO. DESCRIPTION QUANTITY SKETCH

Z01

Z02

Z03

Z04

Z50

Z51

Z52

PHILLIPS SCREWDRIVER

#5 L-TYPE ALLEN KEY

#8 L-TYPE ALLEN KEY

#2 L-TYPE ALLEN KEY

WASHER

SOCKET HEAD SCREW (M10 x 1.5P x 25L)

SOCKET HEAD SCREW (LOW HEAD)

(M8 x 1.25P x 15L)

ASSEMBLY EXPLODED DIAGRAM

Swift Controls™ Panel

Z52

N06

Console Support

Foam Rubber Handle

Console

Motor Cover

Z51

Z50

Z51

Z52

Z53

Q53

Z53

CROSS-HEAD BUTTON SCREW

(M5 x 0.8P x 12L)

Z54

SOCKET HEAD CAP SCREW

(ULTRA LOW HEAD)

(M3 x 0.5P x 15L)

ASSEMBLY INSTRUCTIONS

Please make sure that the power plug is not plugged into the wall outlet while completing the following procedure. To ensure correct assembly of the T8000E, carefully read and follow these steps:

ATTENTION: After installation is completed, the treadmill will need to be calibrated by using the AUTO-CHECK function. If this is not done, the treadmill's speed and incline values may be incorrect and damage the treadmill. Do not stand on the belt when performing the AUTO-CHECK function.

Frame Base

N07

N04

1110

Page 8

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

STEP 1

Unscrew the screw (Q53) on each side, and keep the screws. Remove the motor cover. Pull out console, antenna coaxial signal, RCA and C-SAFE cables and route them through the right console mast. Place the right console mast and then the left console mast in the console support brackets. Secure the right and left support with the 4 screws and 4 washers provided (Z51, Z50). Make sure these screws are tightened.

Z51

Z50

Z51

STEP 2

Connect the console cable from the console set to the motor control board. And insert the other connectors to upper control board and TV module. Secure the console set with 2 screws (Z52) on each side.

Z52

1312

Page 9

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

STEP 3 STEP 4

Put the foam rubber handle into the handlebar frame. Use the handlebar cap (N06, N07) to secure the handle foam rubber.

Note: The handle bar caps separate into right and

left, make sure these caps are in the correct position.

1). Connect the speed and incline Swift Controls™ cable with the control panels. Secure the Swift Controls™ panels onto the handlebars with the 2 screws (Z54)

Note: The Swift Controls™ panels separate into right for SPEED control

for INCLINE control, make sure these panels are in the correct position.

on each side.

and left

2). Place the motor cover onto the treadmill front end and secure with the screws (Q53) included in the motor cover and the screws (Z53) provided in the hardware kit. Plug the

power cable into the outlet.

Z54

N03

N06

N04

Z54

Z53

Q53

N07

1514

Page 10

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

SERIAL NUMBER LOCATION

FINAL ASSEMBLY

Enter the to execute P15 AUTO CHECK. The treadmill’s speed and incline will be calibrated automatically. This will take around 2 minutes to run. After completing calibration, press EMERGENCY STOP key twice to back to the initial starting screen.

MANAGER’s CUSTOM SETTINGS

SERIAL # PLACEMENT

1716

Page 11

1918

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

USING THE WORKOUTS

DISPLAY CONSOLE

B C

THE TFT LCD DISPLAY:

The TFT LCD Display provides interactive workout screen and easy access to entertainment TV.

EMERGENCY STOP:

Press the button to stop the running belt and end the current workout. To resume, press the button once again.

CONTROL KEYPAD:

The Control Keypad allows the user to set up programs, control workout and adjust TV parameters.

HEADPHONE JACK:

The jack is located on the left-hand side of the console faceplate housing. Headphones are necessary to access the sound for the TV.

1 TV REMOTE CONTROL keys:

These keys are dedicated TV entertainment controls for the TV and the screen switch.

VOL + / - : Volume control for the TV. CH + / - : Channel control for the TV. MODE: This key allows the user to switch the LCD screen showing relevant workout data or

size of entertainment screen.

2 SPEED & INCLINE: Use the arrow keys to adjust speed or incline. 3 START / SELECT / QUICK START: This key has several functions during an exercise session.

Each function is described as below:

START: Use the START key to begin your workout after the workout setup. SELECT: Use the SELECT key to confirm specific prompts during the workout setup. QUICK START: Press QUICK START to begin your workout immediately, without having to select

a workout program. 4 RIGHT AND LEFT ARROWS: These right and left arrows present the available selections and affect what appears on the display.

PAUSE / RESET / CLEAR: This key has several functions during an exercise session. Each function

is described as below:

PAUSE / RESET: Press this key once to enter PAUSE mode. And, press it again to reset the treadmill

and restart the programming sequence.

CLEAR: Use the CLEAR key to clear data not yet entered during the workout setup. 6 PROGRAM QUICK KEYS: To begin an exercise session, press any of these keys to select the

program. For detailed program descriptions, refer to WORKOUT OVERIVEWS.

WARM UP: Press this key to begin an automatically customized workout warm-up. COOL DOWN: Press this key to begin an automatically customized workout cool-down.

61225344

Page 12

DISPLAY DESCRIPTIONS

The TFT LCD Display allows the user to move from screen by screen by Control Keypads to access other screens. The TFT LCD Display enables users to access:

1) PROGRAM SELECTION — choose a workout

2) WORKOUT SETUP — enter workout values

A1. PROGRAM ICONS: Display all programs — MANUAL, INTERVAL, WEIGHT LOSS, FAT BURN, 5K RUN, TARGET HEART RATE, QUICK START, WARM UP and COOL DOWN. If one of programs is selected,

the program icon becomes hollow. And, the selected program icon pops out to show as a large icon in the screen.

A2. INFORMATION DISPLAY:

To display instructions for a workout setup.

A2-1. INFORMATION AREA:

Shows the user what workout is currently being set up.

A2-2. CORRESPONDING KEYS: These keys are corresponded to the keys on the Control Keypads, listed in the following chart.

A3. VALUE CIRCLE: Shows values for workout parameters set up. The unenclosed circle would increase or decrease a dotted curve depending on the value input. The small red numbers represent minimum and maximum values in each workout parameter.

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

A2-2 A2-2A2-1

CORRESPONDING KEYS CONTROL KEYPADS DESCRIPTIONS

SELECT PROGRAM

PROGRAM SELECT

SELECT LEVEL

SELECTCLEAR LEVEL

PROGRAM

LEVEL

SPE

LIN

QUI

START

CLE

REMOTE

CONTRO

L K

EYS

UAL

5K R

WEIGHT L

GET

PROGRAM

QUICK KEYS

COOL D

MOD

VOL

RESE

STA

SELECT

A2-2 A2-2

PAU SE

RESET

START

SELECT

ëPress SELECT key to confirm an entry of the number.

ëPress START key to begin the workout.

ëPress CLEAR key to clear data not yet

entered during the workout setup.

ëPress RIGHT arrow key to increase value for the workout parameters. ëPress this key to select SPEED control mode during the setup of heart rate program.

ëPress LEFT arrow key to decrease value for the workout parameters. ëPress this key to select INCLINE control mode during the setup of heart rate program.

Page 13

JOHNSON TREADMILL T8000E

3) WORKOUT PROGRESS — monitor progress, edit workout goals, and access TV viewing

B1. PROGRAM NAME:

Shows the user what workout is currently exercising.

B2. WORKOUT PROFILE:

During a workout, intervals, hills and valleys appear in this window as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage.

B3. WORKOUT READOUT:

Shows the workout readout the user is currently exercising.

B4. DISPLAY MODE:

Shows the LCD screen display mode. The mode has relevant workout data and size of entertainment screen.

B5. TV SCREEN:

Shows the current TV program.

B6. CH / VOL DISPLAY: Shows the current channel number and TV volume.

B6 B4 B6

PROMPT DEFAULT MINIMUM MAXIMUM UNIT

TIME

LEVEL

WEIGHT

AGE

SPEED

INCLINE

68 / 150

30 N/A N/A

34 / 75

0.8 / 0.5 0

99 10

182 / 400

20 / 12

minute

kg / lbs

years old

km/h / mph

NOTE:

The workout time displays “countdown” according to default time or the maximum time

that the club owner set. When the workout time input as “0”, the time will count from 0 to

the maximum time depending on the fitness club setup. The workout pattern repeats until the

maximum workout time is completed.

WORKOUT PARAMETER PROMPTS

Page 14

PROGRAM

NAME

DEFAULT

TIME

PROGRAM

CONTROL

PROMPT

INPUT

DESCRIPTION

QUICK START

MANUAL

INTERVAL

WEIGHT LOSS

FAT BURN

5K RUN

TARGET HR

N/A

20 min

N/A

20 min

N/A

Elevation

Elevation Speed or

N/A

Time, Weight

Level, Time, Weight

Level, Weight

Age, Target, Heart Rate, Max Speed or Max Elevation, Time, Weight

WORKOUT OVERVIEWS

Manual is a constant effort workout in which the user can change incline or speed at any time.

Interval is periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. At any point during the workout, the user can change the settings of the current speed.

Weight Loss is designed to promote weight loss by raising and lowering the elevation. The treadmill automatically adjusts the incline according to the overall time.

Fat Burn is a high-intensity workout for burning the body's fat reserves. The program adjusts the intensity level through changing the elevation, and the user controls the speed during the workout.

5K Run is designed to simulate a 5K run with elevation changes. The program completes when the user has completed 5K, so there is no preset time. The user can make speed changes during this program.

Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strap, or grasps the HR grip sensors continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum.

2524

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

WORKOUT TIPS

• Johnson Fitness strongly recommends seeing a physician for a complete medical exam before undertaking an exercise program. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breathe, he or she must stop immediately.

• Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet.

• The On/Off switch for the treadmill is located next to the power supply plug in. Turn the switch to the on " I " position to activate the treadmill.

• To mount or dismount the treadmill, grasp the stationary side-handrails and place the feet firmly on the right and left side platforms before the running belt begins moving. Prior to the workout, please always attach the security clip to your clothing.

• When you are comfortable situated onto the running belt, the computerized display console on the treadmill instructs you to operate the unit.

• The better position of feet to walk on the treadmill is where feet planted on the belt to have your arms bent slightly and your hands grasped the heart rate sensors (as below illustration). At the running speed, the feet stand on the point of the belt where the hands at a natural swing are not able to touch the front handrail.

• Hold onto the handrail with one hand while you increase SPEED with the other hand. Once you are comfortable with the walking or running speed, you can remove your hands from the handrail.

• Do not attempt to grasp the sensors at speeds above 7.2 km/h (4.5 mph). For these speeds, the use of a heart rate chest strap is recommended.

• It is highly recommended that you always incorporate the warm-up and cool-down period into your workout. Warm-up brings the heart rate into the lower end of the target

zone and increases respiration and blood flow to working muscles. Cool-down takes time

for a user’s heart rate to return to a resting state after vigorous exercise and reduces the

amount of lactic acid in muscle tissue.

WARM UP

N/A Speed Time

Warm-up is a low-intensity phase that brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles.

COOL DOWN

N/A Speed Time

Cool-down is a low-intensity phase that allows the body to begin removing lactic acid, and other exercise by-products, which build up in muscles and contribute to soreness.

Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically.

Page 15

WORKOUT SETUP STEPS

Quick Start

Press the "QUICK START" key and the VALUE CIRCLE will display "3, 2, 1,GO”. The workout begins at the lowest incline and speed, and the time counts “0” to the maximum time.

Warm Up

1) Press the “WARM-UP” key to enter the program.

2) “SELECT TIME” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to begin a warm-up.

Cool Down

1) Press the “COOL-DOWN” key to enter the program.

2) “SELECT TIME” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to begin a cool-down.

Manual

1) “SELECT TIME” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

2) “SELECT WEIGHT” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

3) Press START to begin the workout.

2726

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

Interval, Weight Loss & Fat Burn

1) “SELECT LEVEL” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

2) “SELECT TIME” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

3) “SELECT WEIGHT” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm..

4) Press START to begin the workout.

5K Run

1) “SELECT LEVEL” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

2) “SELECT WEIGHT” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm..

3) Press START to begin the workout.

Target HR

1) “SELECT AGE” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

2) “SELECT TARGET HR” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

3) “SELECT CONTROL MODE” using the RIGHT and LEFT arrow keys. * If SPEED is selected, the console will display "SET MAX SPEED”. Use the RIGHT / LEFT key to set Max Speed. *

If INCLINE is selected, the console will display "SET MAX INCLINE”. Use the RIGHT / LEFT

key to set Max Incline.

4) “SELECT TIME” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

5) “SELECT WIEGHT” using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.

6) Press START to begin the workout.

With the interactive screen, the computerized display leads the user to step-by-step to input the workout. The screen would instruct the user to use the PROGRAM QUICK KEYS to enter the program, or use LEFT/RIGHT arrow keys to scroll to desired program when prompted in the screen. Use the LEFT/RIGHT arrow keys to enter the values. Press the SELECT key to confirm each selection, or press the CLEAR key to clear data not yet entered. Follow the steps to set up each workout.

Page 16

VIDEO AUDIO-L AUDIO-R

C-SAFE

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

MANAGER’s CUSTOM MODE

USING FITNESS NETWORKING

The two RJ45 networking ports are available in the T8000E. These ports allow the treadmill to be connected to a fitness entertainment system and/or a fitness network, such as FitLinxx®.

C-SAFE PORT

The C-SAFE port located next to the On/Off switch enables the treadmill to upload user workout statistics to a fitness network database.

The Manager’s Custom Mode provide two modes for the club manager. The MANAGER MENU allows the manager to set unit defaults, configure workout duration, set maintenance lamp distance, check error log, etc. The TV SETUP allows adjusting TV brightness, contrast, or sharpness. Also allows choice of TV system and favorite channel setup.

To enter the Manager’s Custom Mode, press and hold down the "INCLINE " and "SPEED " keys. Continue to hold down these two keys until the screen displays “MANAGER MENU” and “TV SETUP”.

1. To scroll the red bar in the list of Manager’s Mode, use the SPEED / key.

2. To select a setting, press the SELECT key to enter.

3. To change the value of the setting, use the SPEED / key or LEFT / RIGHT arrow keys.

4. To confirm and save the value of the setting, press the START / SELECT key. “SETTING SAVED” will appear in the screen. To exit the setting without saving, press the CLEAR key over 5 seconds, or if there is no key pressed, the system will resume automatically.

CARDIO PORT

The Cardio port is located on the back of the console that is compatible with entertainment protocol such as Cardio Theater® or BroadcastVision™.

2928

Page 17

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

MANAGER MENU

CUSTOM SETTING

MAXIMUM TIME

DEFAULT TIME

DEFAULT LEVEL

DEFAULT WEIGHT

DEFAULT AGE

MAXIMUM SPEED

MAXIMUM INCLINE

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

This option enables fitness club managers to set the program maximum workout duration limits during peak and non-peak

99 min

20 min

68kg / 150lbs

20kph / 12mph

10 min

34kg /

75lbs

6.4kph / 4mph

99 min minute

99 min

minute

n/a

182kg / 400lbs

20kph / 12mph

kg/lbs

age

kph/ mph

hours of club traffic. Active variable displayed in the TIME display after change.

This option controls the default program

time.

This option controls the default program

level.

This option controls the default weight used in the calorie calculations. Sets to

default unit change (kilograms or pounds). Displayed in native units.

This option controls the default users age

used in the target heart rate calculations.

Controls the maximum speed for all programs. Displayed in native units

(kilometers per hour or miles per hour). Reverts to default value on unit change.

This option changes the maximum incline

N/A

grade to 4%, 8%, 12% or 15%.

START

SPEED

PAUSE

P10

TIME

LANGUAGE

P11

SOFTWARE

P12

VERSION

P13

UNITS

MAINTENANCE

P14

LAMP

MAINTENANCE

P14-1

DISTANCE

CUSTOM SETTING

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

Controls the starting speed for all

0.8kph/

0.5mph

60 sec 30 sec 180 sec

0.8kph/

0.5mph

3kph/

1.8mph

kph/ mph

second

English N/A N/A N/A

N/A

Metric

4000 km/ 2500 miles

N/A N/A

Metric English

N/A

ON OFF N/A

4000 km/ 2500 miles

8000 km/ 5000 miles

km/ miles

programs (minimum speed not affected). Displayed in native units (kilometers per

0.1 hour or miles per hour). Reverts to default value on unit change.

This is the maximum time during which

a workout can remain in pause mode.

The language of the screen display, not

N/A

including Manager’s Custom Setting.

Software version is not editable, for

N/A

display only.

The measurement unit type for weight,

N/A

distance, and speed.

This option enables fitness club managers

N/A

to set the maintenance lamp as ON/OFF.

When the treadmill's accumulated distance reaches the certain kilometers

or miles, the maintenance lamp will light meaning maintenance is needed.

ACCUMULATED DISTANCE

ACCUMULATED TIME

N/A N/A N/A N/A

N/A N/A N/A N/Ahour

km/

mile

Accumulated distance is not editable, for display only. Displayed in native units ( miles or kilometers ). Holding the INCLINE and SPEED keys simultaneously to reset the accumulated distance. After the treadmill reaches the maximu distance, it will reset to “0” automatically.

Accumulated distance is not editable, for display only. Displayed in native units ( miles or kilometers ). Holding the INCLINE and SPEED keys simultanously to reset the accumulated distance. After the treadmill reaches the maximu distance, it will reset to “0” automatically.

P15

P16

P17

P18

AUTO CHECK

ERROR LOG

RESET ALL

MANUFACTURING TEST

N/A N/A N/A N/A

N/A

N/A N/A N/A N/A

N/A N/A N/A

3130

The function is to calibrate the treadmill’s speed and incline after the completion of

N/A

the installation.

Error log is not editable, for display only. Holding the INCLINE and SPEED keys simultaneously to erase error log.

The function would clear all custom settings had stored on the unit as a default value.

N/A

Holding the INCLINE and SPEED keys simultaneously to clear all custom setting as a default value.

The function is only for manufacturer

N/A

use.

Page 18

TV SETUP

SYSTEM SEARCH

FAVORITE CHANNEL (note 3)

RESET ALL

CHANNEL SEARCH (note 2)

SCREEN ADJUST

TV SYSTEM (note 1)

NTSC

PAL / SECAM

BLUE SCREEN CONTRAST SHARPNESS BRIGHTNESS TINT COLOR

VIDEO SYSTEM

NTSC PAL / SECAM

AUTO (FULL) ADD / ERASE RF SYSTEM AUTO (FULL) ADD / ERASE MANUAL SERACH

NTSC PAL-B/G AUTO N/A N/A CATV N/A N/A N/A OFF OFF Middle Value Middle Value Middle Value Middle Value Middle Value N/A

3332

ADJUSTMENTS DEFAULT VALUE

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

NOTE:

1) TV SYSTEM:

êIf your local system is NTSC, the TV SYSTEM only displays “NTSC, NTSC-J, NTSC-US”. êIf your local system is PAL or SEACM, the TV SYSTEM displays “PAL-B/G, PAL-D/K, PAL-I,SECAM-L.

2) CHANNEL SEARCH:

The built-in TV system can automatically memorize all the channels in your region. Channel search has a different setting in NTSC and PAL/SECAM. Please follow the steps according to your local TV system.

IF YOUR LOCAL SYSTEM IS “NTSC”, PLEASE SELECT LOCAL RF SYSTEM (RADIO FREQUENCY SYSTEM).

1. Enter RF System to select “TV” or “CATV”. TV means outdoor antenna connection; CATV means cable TV connection.

2. Press SPEED / to move the scroll to AUTO(FULL), and then press SELECT. The tuner will search through all available channels in your area and add them to the TV memory.

Sometimes, it may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. You can manually add weak or additional channels or erase unwanted channels from TV memory.

3. Press SPEED / to move the cursor to ADD/ERASE, and press ENTER to add or erase the channels.

4. Press SPEED / to select which channel wants to add or erase. êIf “ADD” displays next to the channel number, it means this channel wasn't in the memory. Press SELECT to add this channel. êIf “ERASE” displays next to the channel number, it means this channel has already been in the memory. Press SELECT to erase this channel.

IF YOUR LOCAL SYSTEM IS “PAL” OR “SECAM”, PLEASE FOLLOW THE STEPS BELOW.

1. Press SPEED / to move the cursor to AUTO(FULL), and press SELECT. The tuner will search through all available frequencies in your area and save them to the TV memory as a channel number in order. After pressing AUTO (FULL) search, you can manually erase unwanted channels from TV memory or add the erased channels back.

2. Press SPEED / to move the cursor to ADD/ERASE, and press SELECT to select the wanted or unwanted channels.

êIf “ERASE” displays next to the channel number, press SELECT to erase this channel. êIf “ADD” displays next to the channel number, press SELECT to add this channel.

3. Press SPEED / to move the cursor to MANUAL SEARCH, and press SELECT to enter the MANUAL SEARCH screen.

3.1 Press SPEED / to move the cursor to SEARCH, and press SELECT to search the frequency.

3.2 When you select the frequency, press SELECT to confirm.

3.3 Press SPEED / to move down the cursor to SAVE AS A NEW CH, and press SELECT.

3.4 Press SPEED / to select a channel number, and press SELECT to save this channel number into TV memory.

Page 19

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

3) FAVORITE CHANNEL:

Up to 50 favorite channels can be stored for a continuous selection during making channel up or down.

MAINTENANCE

The T8000E built for use in the commercial environment - 12 hours a day and seven days

TURN ON / OFF FAVORITE CHANNEL SETTING Press SPEED / to move the cursor to ON / OFF, and press SELECT to turn on/off the setting.

SELECT FAVORITE CHANNELS

1. When Favorite Channel is ON, press SPEED / to move the cursor to ADD CH or ERASE CH and press SELECT to add or erase the wanted channels.

2. Press SPEED / to select which channel wants to add or erase.

êTo ADD a channel, select the wanted channel numbers and press SELECT to add this channel. The channel will display in the list. If the wanted channel number has been in the list, it will display a sentence “CHxx has already been in the list.” êTo ERASE a channel, select the wanted channel numbers and press SELECT to erase this channel. The channel will remove from the list. If the wanted channel number was not in the list, it will display a sentence “CHxx is not in the list.”

a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the treadmill as described below, it could affect or void the Johnson limited warranty.

DANGER:

To reduce the risk of electrical shock, always unplug the treadmill from its

power source before cleaning it or performing any maintenance task.

CAUTION:

Any changes or modifications to this equipment could void the product

warranty.

NOTE:

Safety of the equipment can be maintained only if the equipment is examined

regularly for damage or wear. Keep the equipment out of use until defective parts are

If the list has had “50” channels, it won't accept to ADD any channel. “Unacceptable to add any channel” will display in the screen, if adding a channel. If the list has a “zero” channels, it won't allow to ERASE any channel. “No channel in the list”, if trying to erase a channel.

repaired or replaced.

RECOMMENDED CLEANING TIPS

1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces. DO NOT use ammonia, chlorine, or acid-based cleaners.

2) DO NOT pour water or cleaning solutions on any surface. This could cause electrocution.

3) Check the operation of the emergency stop system once a week.

4) Wipe the user’s contact areas, including console, HR handgrips, side handrails and side rails, after every use.

5) Brush away any wax deposits from the deck and belt area. This is a common occurrence until the wax is worked into the belt material.

6) Be sure to remove any obstructions from the path of the elevation including power cords.

7) Monthly, remove the motor cover to check for debris and clean with a dry cloth or small vacuum nozzle. Unplug the unit while executing this procedure.

3534

Page 20

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

CENTERING THE BELT

The Johnson Treadmill is built with a crowned roller to ensure proper tracking of the belt in the centre of the deck. An 8 mm Allen wrench (A 5/16-inch hex key wrench) is required for this task. The unit has access holes in the rear roller guards which allow access to the tensioning bolts.

Before proceeding, please follow the centering belt procedure tips.

1) DO NOT wear loose clothing or jewellery while making this adjustment.

2) NEVER have the tensioning bolts more than 1/4 turned at a time.

3) Tighten one side and loosen the other side to prevent from over-tightening or loosing the belt. Over-tightening the belt will significantly shorten the life of the belt.

4) After the belt adjustment, let the treadmill run for 5 minutes to test. If necessary, repeat the procedure until the belt is centered.

If the belt has moved to the right, turn the right tension bolt a 1/4 turn clockwise and then turn the left tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

If the belt has moved to the left, turn the left tension bolt a 1/4 turn clockwise and then turn the right tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

1/4 TURN

Repeat the adjustments until the belt appears centered. Allow the treadmill to continue running for several minutes at 6.4 km/h (4.0 mph) to be sure that the tracking is stabilized.

NOTE: DO NOT

exceed one full turn of the adjusting screws in either direction. If after

one full turn the belt does not track properly, please contact Johnson Fitness or the

local authorized dealers.

1/4 TURN

TENSIONING THE BELT

Check the tension of the belt. The belt should be very snug. When a person walks or runs on the belt, it should not hesitate or slip. If this occurs, turn the belt tensioning bolts a 1/4 turn clockwise for each side. Repeat if necessary until the belt no longer slips. DO NOT exceed one full turn (i.e. four 1/4 turns) per side when adjusting the belt tensioning bolts. If after tension the belt, the belt still hesitates or slips, please contact Johnson Fitness or the local authorized dealers at once.

3736

Page 21

PRODUCT SPECIFICATIONS

Model T8000E

*Product specifications are subject to change without notice.

3938

JOHNSON TREADMILL T8000E JOHNSON TREADMILL T8000E

NOTE: DO NOT over-tighten the tensioning bolts while making belt adjustments.

Over-tightening of bolts may over stretch and damage the striding belt or roller

bearings. DO NOT exceed one full turn of either bolt in either direction.

MAINTENANCE LAMP

1/4 TURN

AND

Console

Display Screen Display Readout

Programs On-the-fly Program Change Telemetric Receiver Contact HR Sensors Program Quick Keys TV Remote Control Keys Navigation Keys One-Touch Quick Start Pause Time Safety Stop Language Options

Technical Data

Drive Motor Motor Control System Speed Range Elevation Range Deck Deck Step Height Belt Area Belt Type Cushion System Rollers Side Handrails Foot Standing Platform Dimensions (LxWxH) Product Weight Max User Weight Power Requirement

Special Features

Integrated Accessory Tray Integrated Reading Rack Maintenance Lamp Swift Controls™ Panel

Entertainment Solutions

Built-in Entertainment System Built-in Headphone Jack Networking Capabilities

15” integrated TFT LCD display Time, Speed, Distance, Pace, Calories, Incline, Level, Heart Rate, Profile, Channel, Volume, Display Mode Manual, Interval, Fat Burn, Weight Loss, 5K Run, Target HR, Warm Up, Cool Down Yes Yes Yes Yes Yes Yes Yes 30 seconds Push button with lanyard clip English, Italian, German, Spanish, French, Dutch, Japanese, Traditional/Simplified Chinese

3.2 hp DC Club grade DC controller

0.8 – 20 km/h / 0.5 – 12 mph 0 – 15% 1” hard-wax reversible deck

20.6 cm / 8” 51cm × 153cm / 20" × 63" Multi-ply Variable durometer cushioning system

7.6 cm / 3” Diameter, precision-crowned steel, front and back 56 cm (22”) long, cantilevered, integrated Speed and Incline Control One piece extrude 216cm × 87cm × 139cm / 84” × 34” × 55” 165 kg / 365 lbs 182 kg / 400 lbs 100V – 230V dedicated circuit required

Yes Yes Yes Yes

Yes Yes CSAFE ready, Fitlinxx™ certified

There is a maintenance lamp on the console to remind the owner to do the scheduled maintenance. When the treadmill’s accumulated distance reaches 4000 kilometers / 2500 miles, or the unit’s accumulated time reaches 6000 hours, the maintenance lamp will light meaning maintenance is needed. The following is the maintenance lamp key:

• Still Blue Light: When the treadmill’s accumulated distance reaches 4000 kilometers / 2500 miles, it means that the treadmill needs to be maintained. To turn off the maintenance light after performing service, hold the INCLINE and SPEED keys

at the same time for 3 seconds.

• Flashing Blue Light: When the treadmill’s accumulated time reaches 6000 hours, it

means that the treadmill’s running deck needs to be flipped. Every 12000 hours, the running deck needs to be replaced. After the deck is flipped or replaced, turning off the light to hold the INCLINE and SPEED keys at the same time for 3 seconds.

• Still Red Light: It means that the treadmill might have a problem, and needs to be checked. Please contact Johnson Fitness customer service or local authorized dealers.