Johnson T8000, T8000 PRO Owner's Manual

Download

Page 1

JOHNSON HEALTH TECH. CO., LTD.

No.26, Ching Chuan Rd., Taya Hsiang, Taichung Hsien 428, Taiwan, R.O.C.

TEL: +886-4-25667100 FAX: +886-4-25601087

E-mail: sales@johnsonfitness.com

http://www.johnsonfitness.com

OWNER'S MANUAL

TREADMILL T8000T8000PRO

July 30, 07’

SAP#058764-A

Page 2

TABLE OF CONTENTS

INSTRUCTION

IMPORTANT SAFETY INSTRUCTIONS

SETUP THE TREADMILL

• Getting Started

• Making A Choice Of Site

• Stabilizing The Johnson Treadmill

• Centering The Belt

• Grounding Instructions

• Electrical Power Requirement

• Unpacking The Johnson Treadmill

ASSEMBLY

• Fasteners & Assembly Tools

• Assembly Instructions

SERIAL NUMBER LOCATION

USING THE WORKOUTS

• Display Console

• Workout Parameter Prompts

• Workout Overviews

• Workout Tips

• Workout Setup Steps

• Using Fitness Networking

MANAGER'S CUSTOM MODE

• The List Of Manager's Custom Mode

MAINTENANCE

• Recommended Cleaning Tips

• Centering The Belt

• Tensioning The Existing Belt

• Maintenance Lamp

PRODUCT SPECIFICATIONS

• Model T8000 & T8000PRO Specifications

JOHNSON TREADMILL T8000/T8000 PRO

Page 3

This Owner’s Manual describes the functions of the following product: Johnson Fitness Treadmills – T8000 & T8000PRO

See "Product Specifications" (Page 44 & 45) in this manual for product specific features, the Johnson Treadmill T8000 and T8000PRO are intended for commercial use.

It is recommended that all users of Johnson Fitness exercise equipment should be informed of the following information prior to its use. When using the Johnson treadmill, always follow basic precautions:

• To ensure your safety and to protect the unit, read all the instructions before assembling

and using the Treadmill.

• To ensure the proper use and safety of the Treadmill, make sure that all users read this manual. Please make this manual a part of your facility’s training program. Remind the users that before undertaking any fitness programme, they should obtain complete physical examinations from their physicians. If, at any time while exercising, the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he or she must stop immediately.

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.

INSTRUCTION

READ AND SAVE ALL INSTRUCTIONS before assembling or using this Johnson Treadmill. It is strongly recommended to take the following safety instructions.

• DANGER: To reduce the risk of electrical shock, always unplug the Johnson Treadmill before cleaning or attempting any maintenance activity.

• WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet.

• CAUTION: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working properly, or if it has been damaged or immersed in water. Return the treadmill to Johnson Fitness or authorized dealers for examination and repair.

• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Never place the power cord under carpeting or place any object on top of the power cord.

• Only use the power cord provided with your Johnson Treadmill. If the power cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a a similarly qualified person to avoid a hazard.

• To disconnect, turn the switch to the off position, then remove the plug from the outlet.

• Use this treadmill for its intended purpose as described in this manual. Do not use attachments that have not been recommended by the manufacturer.

• Never drop or insert any object into any opening in the product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Johnson Fitness or authorized dealers.

• Do not reach into, or underneath, the unit or tip it on its side during operation.

• Keep hands and feet clear at all times from moving parts to avoid injury.

• Do not remove the treadmill motor cover or roller covers. Service should be performed only by an authorized service technician.

• Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Johnson Fitness or authorized dealers.

• Do not use the Johnson Treadmill outdoors, near swimming pools or in areas of high humidity.

• Do not operate where aerosol (spray) products are being used or when oxygen is being administered.

IMPORTANT SAFETY INSTRUCTIONS

0302

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Page 4

• Be sure the emergency stop pull cord is clipped to user and in a proper placed position on the user before beginning any workout.

• Use the stationary handrails when mount or dismount the treadmill. Place the feet firmly on the right and left side platforms before the running belt begins moving (prior to a workout). Step onto the running belt when the speed is at or below 1.6 km/h (1 mph).

• Never mount or dismount the treadmill while the running belt is moving.

• Handrails may be held to enhance stability as needed, but are not for continuous use.

• Do not wear any clothing that might catch on any moving parts of this treadmill.

• Never walk or jog backwards on the treadmill.

• Do not use this product in bare feet. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

• Do not turn the belt by hand.

• Close supervision is necessary when used near children, invalids or disabled people.

• When the treadmill is in use, young children and pets should be kept at least 3 meters / 10 feet away.

• When it is necessary to immobilize the treadmill,

T8000:

Set the display to read "SELECT PROGRAM OR PRESS QUICK START". Then hold down the “ENTER” and “CLEAR” keys at the same time. The treadmill will now display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the “ENTER” & “CLEAR” keys. The treadmill will display "SELECT PROGRAM OR PRESS QUICK START" again.

T8000 PRO:

GETTING STARTED

Read the Owner’s Manual before setting up the Johnson Fitness Treadmill. Place the treadmill where it will be used before beginning the setup procedure.

MAKING A CHOICE OF SITE

The site that you select for the treadmill should be well-lit and well-ventilated. Locate the T8000 or T8000PRO on a structurally solid and flat surface a few meters / feet from the wall or any equipment (Allow a distance of 21 centimeters, or eight inches, between the treadmill and other units on either side. Allow a distance of two meters, or six feet, from the rear of the treadmill to any object or surface.) If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base under the treadmill.

Please do not place the treadmill in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine. To make exercise a desirable daily activity for you, the treadmill should be in an attractive setting.

STABILIZING THE JOHNSON TREADMILL

After placing the unit where it will be used, check its stability. If the treadmill is placed on a slightly, uneven surface, adjusting the adjustable levelers located underneath the base frame can help, but will not compensate for extremely uneven surfaces. To adjust, loosen the nut, and turn the leveler until the rocking motion ceases, and both levelers rest firmly on the floor. Retighten the nut.

NOTE: It is extremely important that the levelers are correctly adjusted for proper operation. An unbalanced unit may cause striding belt misalignment. A bubble level is recommended to ensure proper leveling.

SETUP THE TREADMILL

0504

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Set the display to read "SELECT PROGRAM OR PRESS QUICK START". Then hold down the "CH " and "VOL " keys at the same time. The treadmill will now display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the "CH " and "VOL " keys. The treadmill will display "SELECT PROGRAM OR PRESS QUICK START" again.

Page 5

Supply Voltage Frequency Rated Current (Amps)

100

120

200

220

230

240+

50/60 Hz

CENTERING THE BELT

After installing and leveling the treadmill, check the belt to ensure that it is tracking properly. The belt might need to be adjusted after the first two hours of use. If the belt needs to be adjusted, please see at the section of

MAINTENANCE

for details.

ELECTRICAL POWER REQUIREMENT

The Johnson Fitness Treadmill requires a dedicated line according to the electrical configurations listed in the chart below. It is particularly important that no sensitive electrical equipment, such as a computer or a TV, shares the same circuit.

GROUNDING INSTRUCTIONS

The Johnson Treadmill must be properly grounded. If the product malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current to reduce the risk of electrical shock. This product is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service provider

if you are in doubt as to whether or not the product is properly grounded. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty.

UNPACKING THE JOHNSON TREADMILL

The Johnson treadmill is carefully inspected before it is packaged. It is shipped in four pieces: the frame base, the upright console supports, the console, the foam rubber handles and the hardware kit. Carefully unpack the unit and dispose of the box material.

CAUTION: This unit weighs 165 kg / 365 lbs. To avoid injury to the user and the unit, be sure to have proper assistance to remove and move the unit.

0706

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

(VAC) (Hz)

T8000 T8000 PRO

ADJUSTING THE BELT

Page 6

NOTE: In case these parts are missing from the package, please contact Johnson Fitness or the local authorized dealers at once.

Hardware Kit Hardware Kit

T8000

JOHNSON FITNESS TREADMILL T8000/T8000 PRO

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Console

T8000 PRO

Console Console Supports Console Supports

Foam Rubber Handles Foam Rubber Handles

Frame Base Frame Base

Page 7

JOHNSON FITNESS TREADMILL T8000/T8000 PRO

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

ASSEMBLY EXPLODED DIAGRAM

Z52

Q53

Z53

Z51

N07

N06

Z50

Motor Cover

Console

Swift Controls™ Panel

Frame Base

Foam Rubber Handle

Console Support

ASSEMBLY

FASTENERS & ASSEMBLY TOOLS

PHILLIPS SCREWDRIVER

#5 L-TYPE ALLEN KEY

SOCKET HEAD SCREW (M10 x 1.5P x 25L)

SOCKET HEAD SCREW (LOW HEAD)

CROSS-HEAD BUTTON SCREW

#8 L-TYPE ALLEN KEY

#2 L-TYPE ALLEN KEY

WASHER

PARTS NO. DESCRIPTION QUANTITY SKETCH

Z01

Z02

Z03

Z04

Z50

Z51

Z52

Z53

Z54

ASSEMBLY INSTRUCTIONS

Please make sure that the power plug is not plugged into the wall outlet while completing the following procedure. To ensure correct assembly of the T8000 and T8000 PRO, carefully read and follow these steps:

ATTENTION: After installation is completed, the treadmill will need to be calibrated by using the AUTO-CHECK function. If this is not done, the treadmill's speed and incline values may be incorrect and damage the treadmill. Do not stand on the belt when performing the AUTO-CHECK function.

(M8 x 1.25P x 15L)

(M3 x 0.5P x 15L)

(M5 x 0.8P x 12L)

SOCKET HEAD CAP SCREW

(ULTRA LOW HEAD)

Page 8

1312

STEP 1

STEP 2

Unscrew the screw (Q53) on each side, and keep the screws. Remove the motor cover. Pull out the console, antenna coaxial signal and C-SAFE cables and route them through the right console mast. Place the right console mast and then the left console mast in the console support brackets. Secure the right and left support with the 4 screws and 2 washers provided (Z51, Z50). Make sure these screws are tightened.

Connect the console cables from the console set to the motor control board cables. Secure the console set with 2 screws (Z52) on each side.

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Z51

Z50

Z52

Page 9

1514

STEP 3 STEP 4

Put the foam rubber handle into the handlebar frame. Use the handlebar cap (N06, N07) to secure the handle foam rubber.

Note: The handle bar caps separate into right and

left, make sure these caps are in the correct position.

1). Connect the speed and incline Swift Controls™ cables with the control panels. Secure the Swift Controls™ panels onto the handlebars with the 2 screws (Z54)

on each side.

2). Place the motor cover onto the treadmill front end and secure with the screws (Q53) included in the motor cover and the screws (Z53) provided in the hardware kit. Plug the power cable into the outlet.

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

N06

N04

N07

N03

Z53

Q53

Note: The Swift Controls™ panels separate into right for SPEED control

and left

for INCLINE control, make sure these panels are in the correct position.

Page 10

1716

FINAL ASSEMBLY

Enter the

MANAGER’s CUSTOM MODE

to execute P16 AUTO CHECK. The treadmill’s speed and incline will be calibrated automatically. This will take around 2 minutes to run. After completing calibration, press EMERGENCY STOP key twice to back to the initial starting screen.

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

T8000

T8000 PRO

OPTIONAL ENTERTAINMENT ACCESSORY SHOWN

T8000

T8000 PRO

Page 11

SERIAL NUMBER LOCATION

1918

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

SERIAL # PLACEMENT

USING THE WORKOUTS

DISPLAY CONSOLE

T8000

A B

C E

WORKOUT PROFILE WINDOW:

Duri ng a wor kout, interv als, hills and valleys appear in this wi ndow as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage.

INSTURCTION CE NTER:

This window displays stepby-step instr uctions for setting up a worko ut.

EMERGENCY STOP: Press the button to stop the running belt a nd end the current workout. To resume, press the button once again.

INFORMATIONAL DISPLAY: While you exercise, three sets of numbers, including Speed, Time an d Incline, show information about your workout session.

CONTROL KEYPAD: The control keypad allows the user to set up programs and control workout.

61225344

Page 12

CONTROL KEYPAD: The control keypad allows the user to set up programs, control workout and adjust TV parameters.

2120

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

MODEL T8000 :

T8000 PRO

A B

C E

WORKOUT PROFILE WINDOW:

During a workout, intervals, hills and valleys appear in this wi ndow as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage.

INSTURCTION CE NTER:

This window displays stepby-step instructions for setting up a workout.

EMERGENCY STOP: Press the button to stop the running belt a nd end the current workout. To resume, press the button once again.

INFORMATIONAL DISPLAY: While you exercise, three sets of numbers, including Speed, Time an d Incline, show information about your workout session.

1 NUMBER KEYS: Press the numbers to input exercise Time, Weight, Level, Age, Heart Rate, Speed and Incline.

ENTER KEY: Press this key to confirm an entry of the number. CLEAR KEY: Press this key to clear data not yet entered. 2 SPEED & INCLINE: Use the arrow keys to adjust speed or incline. 3 START / SELECT / QUICK START: This key has several functions during an exercise session.

Each function is described as below:

START: Use the START key to begin your workout after the workout setup. SELECT: Use the SELECT key to confirm specific prompts during the workout setup. QUICK START: Press QUICK START to begin your workout immediately, without having to

select a workout program. 4 RIGHT and LEFT Arrows: These right and left arrows present the available selections and affect what appears on the display. 5 PAUSE / RESET / CLEAR: This key has several functions during an exercise session. Each function is described as below: PAUSE / RESET : Press this key once to enter PAUSE mode. And, press it again to reset the treadmill and restart the programming sequence.

CLEAR: Use the CLEAR key to clear data not yet entered during the workout setup. 6 PROGRAM PLUS™ KEYS: Press any of these keys to view a menu of programs within each

category.

MODEL T8000 PRO :

1 E-CONNEXTION™ CONTROL KEYS: If the entertainment option is attached, the keys act as

TV remote controls.

2 SPEED & INCLINE: Use the arrow keys to adjust speed or incline. 3 START / SELECT / QUICK START: This key has several functions during an exercise session.

Each function is described as below:

select a workout program. 4 RIGHT and LEFT Arrows: These right and left arrows present the available selections and affect what appears on the display. 5 PAUSE / RESET / CLEAR: This key has several functions during an exercise session. Each function is described as below: PAUSE / RESET: Press this key once to enter PAUSE mode. And, press it again to reset the treadmill and restart the programming sequence.

CLEAR: Use the CLEAR key to clear data not yet entered during the workout setup. 6 PROGRAM PLUS™ KEYS: Press any of these keys to view a menu of programs within each

category.

61225344

Page 13

JOHNSON TREADMILL T8000/T8000 PRO

MODEL T8000 PRO

PROMPT DEFAULT MINIMUM MAXIMUM UNIT

TIME LEVEL

WEIGHT

AGE

HEART RATE

SPEED

INCLINE DISTANCE CALORIES

GENDER

68 / 150

30 N/A N/A N/A

5 / 3

500

MALE

34 / 75

10 52

0.8 / 0.5 0

1 / 1

MALE

99 10

182 / 400

200

20 / 12

80 / 50

5000

FEMALE

minute

kg / lbs

years old

beat

km/h / mph

km / mile

cal.

MODEL T8000

PROMPT DEFAULT MINIMUM MAXIMUM UNIT

TIME

LEVEL

WEIGHT

AGE

HEART RATE

GENDER

SPEED

INCLINE

68 / 150

N/A

MALE

N/A N/A

34 / 75

10 52

MALE

0.8 / 0.5 0

99 10

182 / 400

200 FEMALE 20 / 12

minute

kg / lbs

years old

beat

NOTE:

The workout time displays “countdown” according to default time or the maximum time

that the club owner set. When the workout time input as “0”, the time will count from 0 to

the maximum time depending on the fitness club setup. The workout pattern repeats until the

maximum workout time is completed.

WORKOUT PARAMETER PROMPTS

PROGRAM

NAME

DEFAULT

TIME

PROGRAM

CONTROL

PROMPT

INPUT

DESCRIPTION

QUICK START

WARM UP

COOL DOWN

MANUAL

INTERVAL

FAT BURN

N/A

20 min

N/A N/A

WORKOUT OVERVIEWS

MODEL T8000 :

Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically.

Warm-up is a low-intensity phase that brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles.

Cool-down is a low-intensity phase that allows the body to begin removing lactic acid, and other exercise by-products, which build up in muscles and contribute to soreness.

Manual is a constant effort workout in which the user can change incline or speed at any time.

Interval is periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. At any point during the workout, the user can change the settings of the current speed.

Fat Burn is a high-intensity workout for burning the body's fat reserves. The program adjusts the intensity level through changing the elevation, and the user controls the speed during the workout.

Level, Time, Weight

Time, Weight

Time

Elevation

N/A

Speed

Page 14

PROGRAM

NAME

PROGRAM

GROUP

DEFAULT

TIME

PROGRAM

CONTROL

PROMPT

INPUT

DESCRIPTION

QUICK START

WARM UP

COOL DOWN

MANUAL

INTERVAL+

GOAL+

HILL INTERVAL

RANDOM HILL

TIME GOAL

DISTANCE GOAL

CALORIES GOAL

MODEL T8000PRO :

N/A

Time

Speed

N/A

Time

Speed

N/A

Time, Weight

Elevation

20 min

Time, Start Incline, Start Speed, Weight

N/A

Distance, Start Incline, Start Speed, Weight

N/A

Calories, Start Incline, Start Speed, Weight

N/A

20 min

Time, Weight

N/A

20 min

Level, Time, Weight

Elevation

2524

JOHNSON TREADMILL T8000/T8000 PRO

PROGRAM

NAME

PROGRAM

GROUP

DEFAULT

TIME

PROGRAM

CONTROL

PROMPT

INPUT

DESCRIPTION

TARGET HR

20 min

Speed or Elevation

Age, Heart Rate, HR Control, Max. Speed or Max. Incline, Time, Weight

Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum.

K RUN+

5K RUN

10K RUN

5K Run is designed to simulate a 5K run with elevation changes. The program completes when the user has completed 5K, so there is no preset time. The user can make speed changes during this program.

10K Run is designed to simulate a 10K run with elevation changes. The program completes when the user has completed 10K, so there is no preset time. The user can make speed changes during this program.

HEART RATE+

WEIGHT LOSS

Weight Loss is a low-intensity workout for burning the body’s fat reserves. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 65 percent of the theoretical maximum.

FIT TEST

Fitness Test measures cardiovascular fitness compared to other people of the same age and gender. The test takes 5 minutes and is based on your heart rate. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips.

N/A Level,

Weight

Elevation

N/A Level,

Weight

Elevation

5 min Gender,

Age, Weight

Speed and Elevation

Warm-up is a low-intensity phase that brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles.

Cool-down is a low-intensity phase that allows the body to begin removing lactic acid, and other exercise by-products, which build up in muscles and contribute to soreness.

Manual is a constant effort workout in which the user can change incline or speed at any time.

Random Hill creates a random terrain patterm from Hill Interval Program.

Hill Interval helps you to develop strength with effort and recovery elevation intervals. At any point during the workout, the user can change the speed.

This workout sets duration as the workout goal. Once the duration objective is met, the workout goes into a cool-down phase.

This workout is designed to build endurance in a certain distance. Once the objective is met, the workout automatically goes into a cool-down phase, and ends afterward.

This workout is designed to burn a certain number of calories in the selected time duration. Once the objective is met, the workout automatically goes into a cool-down phase, and ends afterward.

Page 15

2726

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

FIT TRAINER+

PROGRAM

NAME

PROGRAM

GROUP

DEFAULT

TIME

PROGRAM CONTROL

PROMPT

INPUT

DESCRIPTION

FIT TEST

COOPER TEST

5 min Elevation

and Speed

Gender, Age, Weight

12 min Elevation

and Speed

Gender, Age, Weight

Fit Test measures cardiovascular fitness compared to other people of the same age and gender. The test takes 5 minutes and is based on your heart rate. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips.

Cooper Test monitors the development of endurance. The test comprises of seeing how far the user can run or walk in 12 minutes.

PROGRAM

NAME

PROGRAM

GROUP

DEFAULT

TIME

PROGRAM

CONTROL

PROMPT

INPUT

DESCRIPTION

BRAVE HILL

LAKESIDE

PLATEAU

TARGET HR

WEIGHT LOSS

DESERT

FOREST

20 min

20 min Elevation

Elevation

Speed or Elevation

20 min

Time, Level, Start Speed, Weight

Time, Start Speed, Weight

Age, Heart Rate, HR Control, Max. Speed or Max. Incline, Time, Weight

Brave Hill takes the user climb a 45degree hill based on a gradual elevation change.

Imagine yourself running through beautiful scenery as this Lakeside program gradually changes elevation.

Forest takes the user through several hills based on the elevation change.

This program simulates walking or running in desert that gradually increases in elevation, before its gradual decent.

Plateau is a high-intensity workout for improving your cardiovascular conditioning by simulating a plateau hill climb.

Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strap, or keep hands on contact heart rate grips continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum.

MULTI FX+

HEART RATE+

Page 16

WORKOUT SETUP STEPS

MODEL T8000:

QUICK START

2928

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

WORKOUT TIPS

• Johnson Fitness strongly recommends seeing a physician for a complete medical exam before undertaking an exercise program. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breathe, he or she must stop immediately.

• Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet.

• The On/Off switch for the treadmill is located next to the power supply plug in. Turn the switch to the on " I " position to activate the treadmill.

• To mount or dismount the treadmill, grasp the stationary side-handrails and place the feet firmly on the right and left side platforms before the running belt begins moving. Prior to the workout, please always attach the security clip to your clothing.

• When you are comfortable situated onto the running belt, the computerized display console on the treadmill instructs you to operate the unit.

• The better position of feet to walk on the treadmill is where feet planted on the belt to have your arms bent slightly and your hands grasped the heart rate sensors (as below illustration). At the running speed, the feet stand on the point of the belt where the hands at a natural swing are not able to touch the front handrail.

• Hold onto the handrail with one hand while you increase SPEED with the other hand. Once you are comfortable with the walking or running speed, you can remove your hands from the handrail.

• Do not attempt to grasp the sensors at speeds above 7.2 km/h (4.5 mph). For these speeds, the use of a heart rate chest strap is recommended.

• It is highly recommended that you always incorporate the warm-up and cool-down period into your workout. Warm-up brings the heart rate into the lower end of the target

zone and increases respiration and blood flow to working muscles. Cool-down takes time

for a user’s heart rate to return to a resting state after vigorous exercise and reduces the

amount of lactic acid in muscle tissue.

Use the PROGRAM PLUS™ KEYS to enter the program, or use RIGHT / LEFT ARROW keys to scroll to desired program. Use the NUMBER keys to enter the values, or use RIGHT / LEFT ARROW keys to scroll to desired values displayed on the INSTRUCTION CENTER. Press the SELECT key to confirm each selection. Follow the steps to set up each workout.

Press the "QUICK START" key and the WORKOUT PROFILE WINDOW will display "3, 2, 1, GO!” The workout begins at the lowest incline and speed, and the time counts “0” to the maximum time.

WARM UP

1) Press the “WARM UP” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) Press START to begin the workout.

COOL DOWN

1) Press the “COOL DOWN” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) Press START to begin the workout.

MANUAL

1) Press the “MANUAL” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) Press START to begin the workout.

INTERVAL & FAT BURN

1) Press the “INTERVAL”, or “FAT BURN” key to enter the program.

2) “SELECT LEVEL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

5) Press START to begin the workout.

NOTE:

The PROGRAM PLUS™ KEYS with a symbol of plus “œ” have couple of similar workout

options included. Press the key repeatedly to select the desired program. Or, press the program

key

once and use RIGHT / LEFT ARROW keys to scroll to the desired program.

Page 17

3130

JOHNSON TREADMILL T8000/T8000 PRO

FIT TEST

1) Press the “FIT TEST” key and use the RIGHT / LEFT ARROW keys to enter the program.

2) “SELECT GENDER” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT AGE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT

5) Press START to begin the workout.

K RUN+

A) 5K RUN

1) Press the “K RUN+” key and use the RIGHT / LEFT ARROW keys to select “5K RUN”

2) “SELECT LEVEL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) Press START to begin the workout

B) 10K RUN

1) Press the “K RUN+” key and use the RIGHT / LEFT ARROW keys to select “10K RUN”

2) “SELECT LEVEL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) Press START to begin the workout.

MODEL T8000PRO:

QUICK START

Press the "QUICK START" key and the WORKOUT PROFILE WINDOW will display "3, 2, 1, GO!” The workout begins at the lowest incline and speed, and the time counts “0” to the maximum time.

WARM UP

1) Press the “WARM UP” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) Press START to begin the workout.

COOL DOWN

1) Press the “COOL DOWN” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) Press START to begin the workout.

MANUAL

1) Press the “MANUAL” key to enter the program.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) Press START to begin the workout.

HEARTRATE+

TARGET HR & WEIGHT LOSS

1) Press the “HEARTRATE+” key and use the RIGHT / LEFT ARROW keys to select “TARGET HR” or “WEIGHT LOSS”.

2) “SELECT AGE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT HR” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT HR CONTROL” using the RIGHT / LEFT ARROW keys, and then press SELECT. * If SPEED is selected, the INSTRUCTION CENTER will display "SET MAX SPEED”. Use the RIGHT / LEFT ARROW key to set MAX SPEED, and then press SELECT. * If INCLINE is selected, the INSTRUCTION CENTER will display "SET MAX INCLINE”. Use the RIGHT / LEFT ARROW key to set MAX INCLINE, and then press SELECT.

5) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

6) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

7) Press START to begin the workout.

INTERVAL+

A) HILL INTERVAL

Press the “INTERVAL+” key and use the RIGHT / LEFT ARROW keys to select “HILL INTERVAL”

2) “SELECT LEVEL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

5) Press START to begin the workout

Use the PROGRAM PLUS™ KEYS to enter the program, or use RIGHT / LEFT arrow keys to scroll to the desired program. The program name is displayed in the PROMPT AREA. Use the RIGHT / LEFT ARROW keys to scroll to desired parameter values displayed in the PROMPT AREA. Press the SELECT key to confirm each selection. Follow the steps to set up each workout.

NOTE:

: the PROMPT AREA is located in the bottom of WORKOUT PROFILE WINDOW. Before an

exercise session, each parameter prompt will appear here depending on different programs.

Page 18

3332

JOHNSON TREADMILL T8000/T8000 PRO

MULTI FX+

A) BRAVE HILL, LAKESIDE & FOREST

1) Press the “MULTI FX+” key and use the RIGHT / LEFT ARROW keys to select “BRAVE HILL, LAKESIDE, or FOREST”.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT LEVEL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT START SPEED” using the RIGHT / LEFT ARROW keys, and then press SELECT

5) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

6) Press START to begin the workout.

B) DESERT & PLATEAU

1) Press the “MULTI FX+” key and use the RIGHT / LEFT ARROW keys to select “DESERT, or PLATEAU”.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT START SPEED” using the RIGHT / LEFT ARROW keys, and then press SELECT

4) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

5) Press START to begin the workout

GOAL+

A) TIME GOAL

1) Press the “GOAL+” key and use the RIGHT / LEFT ARROW keys to select “TIME GOAL”.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT START INCLINE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT START SPEED” using the RIGHT / LEFT ARROW keys, and then press SELECT

5) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

6) Press START to begin the workout

HEARTRATE+

TARGET HR & WEIGHT LOSS

1) Press the “HEARTRATE+” key and use the RIGHT / LEFT ARROW keys to select “TARGET HR” or “WEIGHT LOSS”.

2) “SELECT AGE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT HR” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT HR CONTROL” using the RIGHT / LEFT ARROW keys, and then press SELECT.

5) If SPEED is selected, the INSTRUCTION CENTER will display "SET MAX SPEED”. Use the RIGHT / LEFT ARROW key to set MAX SPEED, and then press SELECT.

6) If INCLINE is selected, the INSTRUCTION CENTER will display "SET MAX INCLINE”. Use the RIGHT / LEFT ARROW key to set MAX INCLINE, and then press SELECT.

7) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

8) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

9) Press START to begin the workout.

B) RANDOM HILL

1) Press the “INTERVAL+” key and use the RIGHT / LEFT ARROW keys to select “RANDOM HILL”.

2) “SELECT TIME” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) Press START to begin the workout.

B) DISTANCE GOAL

Press the “GOAL+” key and use the RIGHT / LEFT ARROW keys to select “DISTANCE GOAL”.

2) “SELECT DISTANCE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT START INCLINE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT START SPEED” using the RIGHT / LEFT ARROW keys, and then press SELECT

5) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

6) Press START to begin the workout.

C) CALORIES GOAL

Press the “GOAL+” key and use the RIGHT / LEFT ARROW keys to select “CALORIES GOAL”.

2) “SELECT DISTANCE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

3) “SELECT START INCLINE” using the RIGHT / LEFT ARROW keys, and then press SELECT.

4) “SELECT START SPEED” using the RIGHT / LEFT ARROW keys, and then press SELECT

5) “SELECT WEIGHT” using the RIGHT / LEFT ARROW keys, and then press SELECT.

6) Press START to begin the workout.

FIT TRAINER+

FIT TEST & COOPER TEST

1) Press the “FIT TRAINER+” key and use the UP / DOWN ARROW keys to select “FIT TEST” or “COOPER TEST”

2) “SELECT GENDER” using the UP / DOWN ARROW keys, and then press SELECT.

3) “SELECT AGE” using the UP / DOWN ARROW keys, and then press SELECT.

4) “SELECT WEIGHT” using the UP / DOWN ARROW keys, and then press SELECT

5) Press START to begin the workout.

Page 19

FIT TEST’S RESULT FOR MALE

3534

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Male

Rating

Age

Estimated VO2 Max (ml/kg/min) Per Age Category

Poor Fair Average Good Excellent

15 – 19 20 – 29 30 – 39 40 – 49 50 – 59

60 +

< 42 < 38 < 34 < 30 < 25 < 21

48 – 51 38 – 43 34 – 39 30 – 35 25 – 31 21 – 26

52 – 57 44 – 51 40 – 47 36 – 43 32 – 39 27 – 35

56 – 61 52 – 57 48 – 51 44 – 48 40 – 44 36 – 40

> 61 > 57 > 51 > 48 > 44 > 40

FIT TEST’S RESULT FOR FEMALE

Female

Rating

Age

Estimated VO2 Max (ml/kg/min) Per Age Category

Poor Fair Average Good Excellent

15 – 19 20 – 29 30 – 39 40 – 49 50 – 59

60 +

< 30 < 28 < 27 < 25 < 21 < 17

30 – 36 28 – 34 27 – 33 25 – 31 21 – 27 17 – 23

37 – 45 35 – 43 34 – 41 32 – 40 28 – 36 24 – 31

46 – 52 44 – 50 42 – 46 41 – 46 37 – 42 32 – 37

> 52 > 50 > 48 > 46 > 42 > 37

COOPER TEST’S RESULT FOR MALE

Male

Rating

Age

Estimated VO2 Max (ml/kg/min) Per Age Category

Very Poor Poor Fair Good Excellent Superior

15 – 19 20 – 29 30 – 39 40 – 49 50 – 59

60 +

< 35.0 < 33.0 < 31.5 < 30.2 < 26.1 < 20.5

35.0 – 38.3

33.0 – 36.4

31.5 – 35.4

30.2 – 33.5

26.1 – 30.9

20.5 – 26.0

38.4 – 45.1

36.5 – 42.4

35.5 – 40.9

33.6 – 38.9

31.0 – 35.7

26.1 – 32.2

45.2 – 50.9

42.5 – 46.4

41.0 – 44.9

39.0 – 43.7

35.8 – 40.9

32.3 – 36.4

51.0 – 55.9

46.5 – 52.4

45.0 – 49.4

43.8 – 48.0

41.0 – 45.3

36.5 – 44.2

> 55.9 > 52.4 > 49.4 > 48.0 > 45.3 > 44.2

COOPER TEST’S RESULT FOR FEMALE

Female

Rating

Age

Estimated VO2 Max (ml/kg/min) Per Age Category

Very Poor Poor Fair Good Excellent Superior

15 – 19 20 – 29 30 – 39 40 – 49 50 – 59

60 +

<25.0 <23.6 <22.8 <21.0 <20.2 <17.5

25.0 – 30.9

23.6 – 28.9

22.8 – 26.9

21.0 – 24.4

20.2 – 22.7

17.5 – 20.1

31.0 – 34.9

29.0 – 32.9

27.0 – 31.4

24.5 – 28.9

22.8 – 26.9

20.2 – 24.4

35.0 – 38.9

33.0 – 36.9

31.5 – 35.6

29.0 – 32.8

27.0 – 31.4

24.5 - 30.2

39.0 - 41.9

37.0 - 41.0

35.7 - 40.0

32.9 - 36.9

31.5 - 35.7

30.3 - 31.4

>41.9 >41.0 >40.0 >36.9 >35.7 >31.4

The tables below list Fit Test and Cooper Test results.

Page 20

3736

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

USING FITNESS NETWORKING

The two RJ45 networking ports are available in the T8000 & T8000PRO. These ports allow the treadmill to be connected to a fitness entertainment system and/or a fitness network, such as FitLinxx®.

C-SAFE PORT

The C-SAFE port located next to the On/Off switch enables the treadmill to upload user workout statistics to a fitness network database.

CARDIO PORT

The Cardio port is located on the back of the console that is compatible to entertainment protocol such as Cardio Theater® or BroadcastVision™.

The Manager’s Custom Mode allow the club owner to customize the treadmill for the club.

MODEL T8000:

To enter the Manager’s Custom Mode press and hold down the " INCLINE " and " SPEED " keys. Continue to hold down these two keys until the INSTRUCTION CENTER displays “MANAGER MENU”.

1. To scroll through the list of Manager’s Custom Mode, use the SPEED / key.

The

INSTRUCTION CENTER will display, in turn, each of custom settings.

2. To select a custom setting, press the SELECT key to enter.

3. To change the value of the setting, use the SPEED /

key,

NUMBER keys, or

LEFT/RIGHT arrow keys.

4. To confirm and save the value of the setting, press the START / SELECT

key.

“SETTING

SAVED” will appear in the INSTRUCTION CENTER. To exit the setting

without saving,

press the RESET key within 5 seconds, or if there is no key pressed,

the system will

resume automatically.

MODEL T8000PRO:

1. To scroll through the list of Manager’s

Custom

Mode, use the SPEED /

key.

The INSTRUCTION CENTER will display, in turn, each of custom settings.

2. To select a custom setting, press the SELECT key to enter.

3. To change the value of the setting, use the SPEED /

key or

LEFT / RIGHT arrow

keys.

4. To confirm and save the value of the setting, press the START /

SELECT

key.

“SETTING SAVED” will appear in the INSTRUCTION CENTER. To exit the setting without

saving, press the CLEAR key over 5 seconds, or if there is no key pressed, the

system will resume automatically.

MANAGER’s CUSTOM MODE

VIDEO AUDIO-L AUDIO-R

C-SAFE

VIDEOAUDIO-L AUDIO-R

Page 21

THE LIST OF MANAGER'S CUSTOM MODE

99 min

20 min

68kg / 150lbs

20kph / 12mph

N/A N/A N/A N/A

km/ mile

N/A N/A N/A N/Ahour

10 min

34kg /

75lbs

6.4kph / 4mph

99 min minute

99 min

182kg / 400lbs

20kph / 12mph

MAXIMUM TIME

DEFAULT TIME

DEFAULT LEVEL

DEFAULT WEIGHT

DEFAULT AGE

MAXIMUM SPEED

MAXIMUM INCLINE

ACCUMULATED DISTANCE

ACCUMULATED TIME

CUSTOM SETTING

3938

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

This option controls the default program time.

This option controls the default program level.

This option controls the default users age used in the target heart rate calculations.

This option changes the maximum incline grade to 4%, 8%, 12% or 15%.

This option enables fitness club managers to set the program maximum workout duration limits during peak and non-peak hours of club traffic. Active variable displayed in the TIME display after change.

This option controls the default weight used in the calorie calculations. Sets to default unit change (kilograms or pounds). Displayed in native units.

Controls the maximum speed for all programs. Displayed in native units (kilometers per hour or miles per hour). Reverts to default value on unit change.

Accumulated distance is not editable, for display only. Displayed in native units ( miles or kilometers ). Holding the INCLINE and SPEED keys simultanously to reset the accumulated distance. After the treadmill reaches the maximum distance, it will reset to “0” automatically.

minute

n/a

kg/lbs

kph/ mph

age

N/A

P10

P11

P12

P13

P14

P14-1

P16

0.8kph/

0.5mph

0.8kph/

0.5mph

3kph/

1.8mph

kph/ mph

60 sec

30 sec 180 sec

START SPEED

PAUSE TIME

SOFTWARE VERSION

UNITS

MAINTENANCE LAMP

LANGUAGE

AUTO CHECK

CUSTOM SETTING

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

This is the maximum time during which a workout can remain in pause mode.

The language of the INSTRUCTION CENTER display.

The measurement unit type for weight, distance, and speed.

Controls the starting speed for all programs (minimum speed not affected). Displayed in native units (kilometers per hour or miles per hour). Reverts to default value on unit change.

Software version is not editable, for display only.

This option enables fitness club managers to set the maintenance lamp as ON/OFF.

When the treadmill's accumulated distance reaches the certain kilometers or miles, the maintenance lamp will light meaning maintenance is needed.

The option is to customize the color in the speed leading light located on the side rails, while the power is ON. Color display options include green, white, sky blue, yellow, blue, purple and red. (T8000 PRO Only)

Error log is not editable, for display only. Holding the INCLINE and SPEED keys simultaneously to erase error log.

The function would clear all custom settings had stored on the unit as a default value. Holding the INCLINE and SPEED key simul-taneously to clear all custom setting as a default value.

The function is only for manufacturer use.

The function is to calibrate the treadmill’s speed and incline after the completion of the installation.

0.1

second

English

N/A N/A

N/A

N/A N/A

N/A

Metric

Metric English

N/A

ON OFF

N/A

P15

BLUE

N/A N/A

N/A

N/A N/A

N/A

P17

ERROR LOG

N/A

N/A N/A

N/A

P19

RESET ALL

N/A

N/A N/A

N/A

P20

MANUFACTURING TEST

N/A

N/A N/A

N/A

If this option is “ON”, the METs prompt will display on the Instruction Center in each 30 second. (T8000 only)

P18

METS

OFF ON OFF N/A N/A

MAINTENANCE DISTANCE

SPEED LEADING LIGHT

4000 km/ 2500 miles

8000 km/ 5000 miles

km/ miles

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Page 22

The T8000 and T8000PRO are built for use in the commercial environment - 12 hours a day and seven days a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the treadmill as described below, it could affect or void the Johnson limited warranty.

DANGER:

To reduce the risk of electrical shock, always unplug the treadmill from its

power source before cleaning it or performing any maintenance task.

CAUTION:

Any changes or modifications to this equipment could void the product

warranty.

NOTE:

Safety of the equipment can be maintained only if the equipment is examined

regularly for damage or wear. Keep the equipment out of use until defective parts are

repaired or replaced.

RECOMMENDED CLEANING TIPS

1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces. DO NOT use ammonia, chlorine, or acid-based cleaners.

2) DO NOT pour water or cleaning solutions on any surface. This could cause electrocution.

3) Check the operation of the emergency stop system once a week.

4) Wipe the user’s contact areas, including console, HR handgrips, side handrails and side rails, after every use.

5) Brush away any wax deposits from the deck and belt area. This is a common occurrence until the wax is worked into the belt material.

6) Be sure to remove any obstructions from the path of the elevation including power cords.

7) Monthly, remove the motor cover to check for debris and clean with a dry cloth or small vacuum nozzle. Unplug the unit while executing this procedure.

MAINTENANCE

4140

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

CENTERING THE BELT

The Johnson Treadmill is built with a crowned roller to ensure proper tracking of the belt in the centre of the deck. An 8 mm Allen wrench (A 5/16-inch hex key wrench) is required for this task. The unit has access holes in the rear roller guards which allow access to the tensioning bolts.

Before proceeding, please follow the centering belt procedure tips.

1) DO NOT wear loose clothing or jeweler while making this adjustment.

2) NEVER have the tensioning bolts more than 1/4 turned at a time.

3) Tighten one side and loosen the other side to prevent from over-tightening or loosing the belt. Over-tightening the belt will significantly shorten the life of the belt.

4) After the belt adjustment, let the treadmill run for 5 minutes to test. If necessary, repeat the procedure until the belt is centered.

If the belt has moved to the right, turn the right tension bolt a 1/4 turn clockwise and then turn the left tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

1/4 TURN

Page 23

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Repeat the adjustments until the belt appears centered. Allow the treadmill to continue running for several minutes at 6.4 km/h (4.0 mph) to be sure that the tracking is stabilized.

NOTE: DO NOT exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, please contact Johnson Fitness or the local authorized dealers.

TENSIONING THE BELT

Check the tension of the belt. The belt should be very snug. When a person walks or runs on the belt, it should not hesitate or slip. If this occurs, turn the belt tensioning bolts a 1/4 turn clockwise for each side. Repeat if necessary until the belt no longer slips. DO NOT exceed one full turn (i.e. four 1/4 turns) per side when adjusting the belt tensioning bolts. If after tension the belt, the belt still hesitates or slips, please contact Johnson Fitness or the local authorized dealers at once.

4342

If the belt has moved to the left, turn the left tension bolt a 1/4 turn clockwise and then turn the right tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

1/4 TURN

NOTE: DO NOT over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. DO NOT exceed one full turn of either bolt in either direction.

MAINTENANCE LAMP

1/4 TURN

AND

There is a maintenance lamp on the console to remind the owner to do the scheduled maintenance. When the treadmill’s accumulated distance reaches 4000 kilometers / 2500 miles, or the unit’s accumulated time reaches 6000 hours, the maintenance lamp will light meaning maintenance is needed. The following is the maintenance lamp key:

• Still Blue Light: When the treadmill’s accumulated distance reaches 4000 kilometers / 2500 miles, it means that the treadmill needs to be maintained. To turn off the maintenance light after performing service, hold the INCLINE and SPEED keys

at the same time for 3 seconds.

• Flashing Blue Light: When the treadmill’s accumulated time reaches 6000 hours, it means that the treadmill’s running deck needs to be flipped. Every 12000 hours, the running deck needs to be replaced. After the deck is flipped or replaced, turning off the light to hold the INCLINE and SPEED keys at the same time for 3 seconds.

• Still Red Light: It means that the treadmill might have a problem, and needs to be checked. Please contact Johnson Fitness customer service or local authorized dealers.

Page 24

PRODUCT SPECIFICATIONS

Model T8000

Workout Profile Window – 7” blue backlit LCD display Instruction Center – 14-character red LED alphanumeric display Informational Display – 3 numeric 7-segment display (3 sets) Time, Speed, Distance, Pace, Calories, Incline, Level, Heart Rate, METS, Profile Manual, Interval, Fat Burn, K Run+(5K Run, 10K Run), Heart Rate+(Target HR, Weight Loss), Fit Test, Warm Up, Cool Down Yes Yes Yes Yes Yes Yes Yes 30 seconds Push button with lanyard clip English, Italian, German, Spanish, French, Dutch, Portuguese, Japanese

3.2 hp DC Club grade DC controller

0.8 – 20 km/h / 0.5 – 12 mph 0 – 15% 1” hard-wax reversible deck

20.6 cm / 8” 51cm × 153cm / 20" × 63" Multi-ply Variable durometer cushioning system

7.6 cm / 3” Diameter, precision-crowned steel, front and back 56 cm (22”) long, cantilevered, integrated Speed and Incline Control One piece extrude 216cm × 87cm × 139cm / 84” × 34” × 55” 165 kg / 365 lbs 182 kg / 400 lbs 100V – 230V dedicated circuit required

Yes Yes Yes Yes

Yes CSAFE ready, Fitlinxx™ certified

CONSOLE

Display Screen

Display Readout Programs

On-the-fly Program Change Telemetric Receiver Contact HR Sensors Program Plus™ Keys Number Keys Navigation Keys One-Touch Quick Start Pause Time Safety Stop Language Options

TECHNICAL DATA

Drive Motor Motor Control System Speed Range Elevation Range Deck Deck Step Height Belt Area Belt Type Cushion System Rollers Side Handrails Foot Standing Platform Dimensions (LxWxH) Product Weight Max User Weight Power Requirement

SPECIAL FEATURES

Integrated Accessory Tray Integrated Reading Rack Maintenance Lamp Swift Controls™ Panel

ENTERTAINMENT SOLUTIONS

JOHNSON® LCD TV Mount Networking Capabilities

*Product specifications subject to change without notice.

JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO

Model T8000 Pro

Workout Profile Window – 7” blue backlit graphic LCD display Instruction Center – 14-character red LED alphanumeric display Informational Display – 3 numeric 7-segment display (3 sets) Time, Speed, Distance, Calories, Incline, Level, Heart Rate, METS, Profile Manual, Interval+(Hill Interval, Random Hill), Multi FX+(Brave Hill, Lakeside, Forest, Desert, Plateau), Goal+(Time Goal, Distance Goal, Calories Goal), Heart Rate+(Target HR, Weight Loss), Fit Trainer+(Fit Test, Cooper Test), Warm Up, Cool Down Yes Yes Yes Yes Yes Yes Yes 30 seconds Push button with lanyard clip English, Italian, German, Spanish, French, Dutch, Portuguese, Japanese

3.0 hp AC AC motor inverter

0.8 – 20 km/h / 0.5 – 12 mph 0 – 15% 1” hard-wax reversible deck

20.6 cm / 8” 51cm × 153cm / 20" × 63" Multi-ply Variable durometer cushioning system

Yes Yes Yes Yes Yes Yes

Yes CSAFE ready, Fitlinxx™ certified

CONSOLE

Display Screen

Display Readout Programs

On-the-fly Program Change Telemetric Receiver Contact HR Sensors Program Plus™ Keys E-CONNEXTION™ Keys Navigation Keys One-Touch Quick Start Pause Time Safety Stop Language Options

TECHNICAL DATA

SPECIAL FEATURES

Integrated Accessory Tray Integrated Reading Rack Maintenance Lamp Swift Controls™ Panel HR Indicator Light Speed Leading Light

ENTERTAINMENT SOLUTIONS

JOHNSON® LCD TV Mount Networking Capabilities

*Product specifications subject to change without notice.