Installation Instructions
12in. Deep Premier Closet Organizer
MODEL: JLH-528, JLH-529
16in. Deep Deluxe Closet Organizer
MODEL: JLH-525, JLH-526
www.johnlouishome.com
BOOKLET SKU#707
IMPORTANT: DO NOT RETURN TO STORE!
For missing or damaged parts, technical or assembly questions,
please call John Louis Customer Service at 1-800-480-6985
IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA!
Llame al servicio al cliente local de John Louis al 1-800-480-6985
para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.
IMPORTANT: NE PAS RENVOYER OU RAPPORTER AU MAGASIN!
Si vous avez une question concernant l’assemblage, des piéces manquantes ou endommagées ou
un probléme technique, appelez le Service á la clientéle de John Louis au 1-800-480-6985.
PARTS LIST Lista De Piezas Liste Des Piéces
Quantity: 1 72 in. Shelf
Quantity: 2 24 in. Adjustable Shelf
Quantity: 2 72 in. Tower Side
Quantity: 1 72 in. Garment Bar
Quantity: 2 48 in. Shelf
Quantity: 1 24 in. Tower Bottom Cam Shelf
Quantity: 1 26.25 in. Tower Top Shelf
Quantity: 2 48 in. Garment Bar
1
Quantity: 6 Angle Bracket
Quantity: 6
J-Hook
Quantity: 6
Tower Bracket
Quantity: 7
Shelf End
Quantity: 14
Shelf mounting L- Clip
Quantity: 6
Bar End
Quantity: 6
Angle Bracket Mushroom
Cap
Quantity: 6 #8 3 in.
Quantity: 12
#8 1 in. (J-Hook)
Quantity: 4
Cam Bolt
Quantity: 4
Barrel Bolt
Quantity: 14
#8 3/4 in.
Quantity: 64 #8 1 1/2 in.
Quantity: 4
Tower Mushroom Cap
Quantity: 4
Barrel Nut
Quantity: 4
#8 1/2 in.
Quantity: 16
Adjustable Shelf Pin
Quantity: 5
Cam Lock Nut
Quantity: 24
#4 3/4 in.
Quantity: 56 Wall Anchor
Quantity: 8 #6 1 1/4 Self Tapping Screw
Quantity: 1
Touch Up Stain Pen
Quantity: 1
Allen wrench
Quantity: 1
Shelf End Template
Contact Contact0 Contacter
For questions concerning missing or damaged parts, technical specs and / or assembly
help, please contact John Louis Home Customer Service at:
Si tiene preguntas sobre partes faltantes o dañadas, especicaciones técnicas o asistencia para el armado, comuníquese con el Servicio al Cliente de John Louis Home:
Pour toute question relative à des pièces manquantes ou endommagées, toute spécication technique et/ou aide au montage, contactez le service après-vente de John Louis
Home au :
1.800.480.6985 service@johnlouishome.com www.johnlouishome.com
John Louis Home 4310 Rider Trail North Earth City, Missouri 63045 USA
© 2016 John Louis Inc., All Rights Reserved.
2
IMPORTANT - Read Before Assembly
STEP 2 - Marking Measurements On Wall
12 in. deep Premier Organizer and 16 in. deep Deluxe Organizer
use the same assembly instruction process EXCEPT DURING
THE J-HOOK PLACEMENT ON THE ANGLE BRACKET.
Assembly instructions are written for 8 ft. conguration A.
All assembly processes are the same for each conguration
EXCEPT for the order or locations of the assembly process.
Use selected conguration for shelf locations.
Shelf lengths and Garment bars may need to be cut depending upon conguration
desired.
All cut shelf lengths are used in closet congurations supplied. Depending upon
your closet dimensions, some cut lengths may not be usable.
EXAMPLE: If you choose an 8 ft. closet conguration and the width of your
closet is 8 ft. 4 in., the cut shelf length will be short 4 in. for use. It is recommended
that if your closet is over the selected dimension (8 ft.), then choose a conguration from the next dimension higher (10 ft.).
EXAMPLE: If you choose an 8 ft. closet conguration and the width of your
closet is 7 ft. 6 in., some shelf lengths may need to be cut 6 in. shorter in length
to t closet dimensions.
1. Locate the 3 main shelf height locations for your conguration.
2. Measure up from the oor & mark the 84 in. location.
3. Measure up from the oor & mark the 42 in. location.
4. Measure up from the oor & mark the 72in. location.
84 in. - top shelf
42 in. - lower hang shelf
72 in. - long hang shelf
1 432
5. Draw a 6 ft. long level line out from wall end at 84 in. location.
6. Draw a 4 ft. long level line out from wall end at 42 in. location.
7. Draw a 22 in. long level line out from wall end at 72 in. location.
8. Locate stud locations at level lines.
VERIFY SHELF MEASUREMENTS
MEASURE - MARK - MEASURE AGAIN
Chosen conguration may not require use of all hardware or components supplied.
It is recommended to secure hardware into wall studs for overall strength and
stability of closet system.
If choosing a custom designed conguration, modications to the instructions provided will be necessary.
All congurations provided may be reversed.
STEP 1 - Determining Your Dimensions
1. Locate your desired conguration (Instructions are written for 8 ft.
conguration A).
2. Double hang is created with 2 - 4 ft. shelf length.
3. Long hang is created by cutting a 6 ft. shelf to 21.75 in. wide. (If your
closet is greater or less than 8 ft. wide you will cut your shelf greater
or less that distance.)
2 3
5
6
7
8
STEP 3 - Tower Assembly
1. Place tower sides down with grooves facing up.
2. Insert cam bolts at tower bottom hole locations (Do not over tighten).
3. Insert tower sides into tower bottom.
4. Insert cam nuts into tower bottom shelf with arrow facing bolt hole.
5. Secure by turning cam nuts clockwise to tighten.
6. Repeat for opposite tower side.
1 2
3
2 3
10 10
3 4
5
7. Place tower top (26 1/4in. shelf) into notches at top of tower.
8. Insert barrel nuts into tower sides with slot in a vertical position.
9. Insert barrel bolts into tower top
10. Flush Tower top with tower side & tighten with allen wrench provided (nut
position may need adjustment).
6
11. Place tower face down (nameplate typically designates tower front)
12. Place top tower bracket between 1st & 2nd groove.
13. Place middle tower bracket between 8th & 9th groove.
14. Place bottom tower bracket between last groove & tower bottom.
15. Repeat for opposite side.
16. Secure brackets to tower using #8 3/4in. screws.
11 12
13
14
15
16
7 8
8 9
STEP 4 - Installing Top Shelf & Tower
It is recommended to install hardware into wall studs. Typically 16 in. on
center. Use 50 lb. wall anchors provided if no stud is present.
On the top level line space shelf mounting L-clip hardware equidistant in
the following manner:
• 3 L-clip hardware within the 48in. shelf location
• 2 L-clip hardware within the tower top location
NOTE: AT LEAST 1 L-CLIP HARDWARE MUST BE IN-
STALLED INTO A WALL STUD AT TOWER TOP LOCATION
1. Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
2. Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
3. Repeat for remaining L-clip locations.
4
1
2 3
2
9. Place shelf onto hardware.
10. Place tower onto hardware.
11. Place a shelf end onto the shelf at tower end.
12. Flush tower with top shelf by moving tower left or right.
13. Level shelf front to back & mark shelf end hardware location on tower.
9 10
4. Position shelf end template onto side wall.
5. Align template line with adjacent wall line.
6. Level template.
7. Mark required Shelf End position for required depth (12in. or 16in. depth).
8. Secure shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud is
present).
4 5
6 7
11
14. Plumb level tower side.
15. Mark tower bracket hole locations on wall.
16. Remove shelf and tower.
17. Align shelf end hardware with the mark on the tower & mark screw hole
locations.
18. Secure shelf end to tower top using #8 1/2in. screws at hole location.
NOTE: If shelf is mounted level with the tower top, the shelf end hardware
should be “centered” on the end of the front rail of the tower top.
14
12
13
15
8 8
5
16
19. Install wall anchors at tower bracket locations if no stud is present.
20. Place tower onto wall and align with hole locations.
21. Place shelf onto wall hardware.
22. Secure tower to wall using #8 1 1/2in. screws at all bracket locations.
23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
17
18
19
20
21
5. Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
6. Repeat for all L-clips at shelf height location.
22
23
23
3
4
5 6
7. Position shelf end template onto side wall.
8. Align template line with adjacent wall line.
9. Level template.
10. Mark required Shelf End position for required depth (12in. or 16in. depth).
11. Secure Shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud is
present).
5
STEP 5 - Installing Secondary Shelves
1. Lower hang shelf is created using a 4 ft. shelf.
2. Long hang is created by cutting a 6 ft. shelf to 21.75 in. wide. (If your
closet is greater or less than 8 ft. wide you will cut your shelf greater
or less that distance.)
1
3. Mark L clip hardware locations for secondary shelves.
• It is recommended to install hardware into wall studs. Typically 16 in.
on center. Use 50 lb. wall anchors provided if no stud is present.
• Space L-clip hardware equidistant in the following manner:
4-5 L-clip hardware per 6 ft. shelf span
3-4 L-clip hardware per 4 ft. shelf span
2 L-clip hardware per 2 ft. shelf span
2
7 8
9 10
11 11
4. Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
6
12. Position shelf end template onto tower side.
13. Align template line with adjacent wall line.
14. Level template.
15. Mark required Shelf End position for required depth (12in. or 16in. depth).
16. Secure using Shelf End #8 - 3/4in. screws.
10
9
11
12
13
16
17. Double check required shelf measurement. Cut Shelf if necessary.
18. Place shelf into shelf end hardware & onto L-clip hardware.
19. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
14
15
11
15
12
13
1614
18 19
19
20. Repeat hardware mounting steps for additional secondary shelf.
7 8
21. Double check required shelf measurement. Cut Shelf to required width.
22. Place shelf into shelf end hardware & onto L-clip hardware.
23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
21
23
22
23
7
STEP 6 - Installing Angle Brackets
16 in. Angle Bracket used with 16 in. deep Deluxe Organizer
1. Measure 3 in. back from front of angle bracket & mark location.
2. Place J-hook snug with underside of bracket & align the front edge of the
J-hook with the mark.
3. Secure using #8 1 in. screws.
4. Repeat for each angle bracket & J-hook.
1
4. Insert #8 3 in. screw into angle bracket.
5. Position angle bracket 6 in. or 4 slats in from shelf end (bracket may be
positioned in your desired location).
6. Ensure bracket is square with shelf underside & back wall.
7. If no stud is present, mark hole location by driving screw into drywall.
8. Install anchor if no stud is present.
9. Secure angle bracket using #8 3 in. screw.
4
5
2 3
12 in. Angle Bracket used with 12 in. deep Premier Organizer
On the 12 in. angle bracket install it is recommended to pre-pilot screw
hole locations with a 1/8 in. drill bit prior to securing the J-hook to the
angle bracket.
1. Place J-hook snug with underside of bracket & ush the front edge of the
J-hook with the front of the angle bracket.
2. Secure using #8 1 in. screws.
3. Repeat for each angle bracket & J-hook.
1
6
8
10. Repeat for 2nd angle bracket.
11. Repeat for all shelf locations.
7
9
2
8
STEP 7 - Installing Garment Bars
1. Locate the bar dimensions in you conguration guide
2. The double hang garment bars are created by using 2 - 4ft. bars.
3. The long hang garment bar is created by cutting a bar to 21 in. wide (The
required distance may vary based on actual closet dimensions)
2 3
9
10
4. DOUBLE CHECK MEASUREMENTS PRIOR TO CUTTING BARS
5. Measure required dimension, mark & cut bar (if necessary).
6. Repeat for all bars.
4
7. Insert bar end into end of garment bar.
8. Turn clockwise to tighten & repeat for each bar end.
7
4
7
11
11
STEP 8 - Installing Adjustable Shelves
1. Select a 24 in. adjustable shelf
2. Insert shelf pin into shelf at hole location.
3. Repeat at each hole location.
2 3
8
9. Place garment bar onto J-hooks.
10. Secure garment bar to J-Hooks using #6 1 1/4 in. self tapping screws.
11. Repeat for all garment bar locations.
8
9
4. Place the shelf into the tower by inserting the pins into the tower grooves.
5. Create a shoe shelf by inserting the shelf upside down with the back one
groove higher than the front.
4 4
5
Creating Adjustable Shelves
STEP 9 - Final Touches
Put your excess cuts back into your closet. Any material greater than 24 in.
wide can be used as an additional shelf.
Cut excess lengths to 24 in. wide to use as tower shelves & place where
ever you choose.
In an 8 ft. closet conguration your 4 ft. of excess shelving can create 2
additional adjustable shelves.
1. Measure required dimension, mark & cut shelf (if necessary).
2. Place shelf end bracket onto shelf.
1
2
1. Insert mushroom caps into all angle brackets.
2. Insert mushroom caps into barrel nut holes on tower sides.
3. Touch up scratches & cut ends with stain pen provided.
1 2
3
3. Using the lower hole location on the bracket, drill a pilot hole using a 1/8 in.
drill bit.
4. Remove the shelf end bracket.
3
5. Re-drill hole 1 - 1 1/4 in. deep using a 1/4 in. drill bit.
6. Repeat steps for each shelf end.
7. Insert shelf pin into holes at each end.
5
4
7
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Loading...