Page 1
KITCHEN COUNTERTOPS
CARE&FINISH/WARRANTY
P.O. BOX 609 • 3601 S. Banker St. • Effingham, IL 62401 • Ph: (888) 431-2667 • Fax: (800) 433-2667
CARE & FINISH
WHERE TO USE YOUR BUTCHER BLOCK
Certainly the ultimate kitchen will have natural butcher block counter tops throughout. However, any design
and decor can be enhanced by the addition of this gorgeous, yet useful, surface. Many home chefs appreciate
a built-in cutting surface next to their cook top. A small section is also often used over the built-in dishwasher.
A butcher block island under a hanging pot rack makes a perfect prep area, or you may want to add the warmth
and beauty of butcher block as a raised breakfast bar with stools. Remember, the beauty and longevity of your
butcher block counter is determined by your care.
SELECTION OF FINISH
John Boos & Co. oers two unique nishes. One is perfect for your application.
Penetrating Oil: If you wish to use your butcher block top as a cutting surface, this is the only nish to purchase.
Just like cutting boards and butcher blocks, the natural wood surface is protected by oil, which is actually
absorbed into the bers. Cleans up easily with mild soap and water. Wipe dry. It is advisable to periodically
re-oil your butcher block tops to preserve their beauty and durability. If, after heavy usage, you wish to remove
cut marks, just sand o the top and re-oil. It will look like new.
Varnique: This beautiful semi-gloss nish is virtually maintenance free. It is impervious to most household
chemicals. Cleans up easily with mild soap and water. Wipe dry. The ne furniture look makes it the choice
for kitchen island bars and eating counters. Cuts into the nish should be resealed immediately to prevent the
exposed wood from absorbing moisture. Renish with EZ-DO Poly Gel.
REFINISH OIL & VARNIQUE TOPS
Oil Tops: Can be sanded with ne sandpaper, sanding with the grain, and re-oiled with Boos® Mystery Oil and/
or Boos Block® Board Cream. NOTE: Oiled tops need to be oiled every 1-2 weeks depending on the usage
and household condition. Maple turns white when dry. Oiled tops can be renished with EZ-DO at any time
through the life of the top. Wood must be clean, dry, well sanded, free of dust and excess oil prior to application
of EZ-DO.
Varnique Tops: Can be spot sanded, if needed, or repair and renish with EZ-DO wipe-on poly gel.
www.johnboos.com
Page 2
KITCHEN COUNTERTOPS
WARRANTY/CARE&FINISH
P.O. BOX 609 • 3601 S. Banker St. • Effingham, IL 62401 • Ph: (888) 431-2667 • Fax: (800) 433-2667
WARRANTY
John Boos & Co. butcher block counter tops are manufactured to exacting standards under constant quality
control inspections. Changes in atmospheric conditions can aect natural wood products. Extreme changes
in humidity may cause warpage. These are not defects in the product or its manufacture and are beyond our
control. Proper installation and care are the best prevention.
The only warranty expressed or implied, is a 1-year guarantee against defect in workmanship and material.
This warranty doe not apply to damages which may result from neglect, accidental or intentional damage,
exposure to extremes in temperature and humidity, and alteration or abuse of the product. Wood products
ordered 'unnished' do not come with a warranty.
Repairs or replacement under this limited warranty will be made through an authorized John Boos & Co. dis-
tributor, if possible, the same dealer/distributor from which the product was purchased. Should the dealer or
factory representative nd return of the product to the factory necessary, all packing and shipping costs will be
the responsibility of the customer.
Factory obligation under this warranty, is limited, at the option of John Boos & Co. to repair or replacement of
the product (or one of equal type and quality if the product is no longer available), within 90 days after receipt
of written recommendation from the dealer, provided none of the above exceptions are evident.
NOTE: Unnished counter tops are not covered by warranty.
Remember, the beauty and longevity of your butcher block counter is determined by your care.
www.johnboos.com
Page 3
HOW TO MAINTAIN YOUR COUNTERTOP
PROBLEM DESCRIPTION CAUSE TO REPAIR
END CHECKS
SPLITS
WIND SHAKES
WARPAGE Cupping Or Bowing
Separation Of The Joints
Along The End Of Board
Separations Of
Joint Along Full
Length Of Board
Small Portion Of Wood
Grain Lifting Up From
Cutting Board
Excessive Dryness,
Not Oiled Frequently
Enough
Excessive Dryness
Grain Separation,
Excessive Dryness
Imbalance Of Moisture
Content Between Top
And Bottom Surfaces.
Oiling Only One Surface
Melt a 1 to 4 mixture of paran
and mineral oil and ll all checks.
Make sure paran seals the
check thoroughly. Continue oiling.
Proceed as above to seal split.
If condition continues for an
extended time period, contact
your dealer.
Clean and dry top. Apply small
portion of white glue to piece of
paper. Slip paper under the shake
and remove, leaving some glue
for adhesion. Place heavy weight
on area overnight and let dry.
Remove any excess glue using
light sandpaper or ne steel wool.
WORK ONLY WITH THE GRAIN !
NEVER AGAINST IT!
Apply oil liberally to concave side.
If not corrected within 2 weeks,
tape plastic (ie. plastic liners, dry
cleaning wrap, etc.) to the convex
side and oil the reverse side every
day. Top will adjust to new
humidity and correct itself.
RAIL
EXPANSION
STAINS
DAMAGE
MINERAL
STREAKS
IMPORTANT!!! If you make any cuts or alterations in your Butcher Block, be sure to renish the exposed
edges with melted paran and oil or lacquer sealer. Holes or notches that have been installed in the table
top must also be renished. If you do not renish these edges, your top will crack due to dryness.
One Rail Raised
Above Balance
Of Cutting Board
Water Spots, Food
Stains, Etc.
Nicks, Gouges, Dents,
Etc.
Dark Streaks In The
Wood
Raised Rail Expanding
At Faster Rate Than
Other
Allowing Food To
Remain On Table
Top Too Long,
Needs Paran Or Wax
External Environment
Natural Discoloring
Of The Wood Due
To Mineral Deposits
In The Tree
Continue oiling as instructed for
regular maintenance. Top will
adjust to new humidity and
correct itself.
Use light sandpaper of ne steel
wood on stain. Continue regular
maintenance. Stain will dissipate
in wood grain.
If top is oiled, simply sand and
re-oil. If top is lacquered, lightly
sand and renish with lacquer or
another compatible nish (consult
a local nishing store).
No repair needed - adds to
individuality of your Butcher
Block!
www.johnboos.com
Loading...