John Boos GMT001 User Manual

A

S

"GMT" Stainless Steel Breaking Tables

w/ 1 1/2" High Density Polyethylene Flat Top (w/ 2-3/4" pieces)
w/ Stainless Steel Base and Bracing

FEATURES:

* 1 1/2" thick High Density Polyethylene Top (w/ 2-3/4" pieces)
sectioned per National Sanitation Foundation regulations
also available with 1 1/2" thick Hard Rock Maple Top,
top style "SCT" flat top
* One piece High Density Polyethylene Top available at no extra charge
must specify
* Top is held in place by welded clips, removable for ease in cleaning
* Stainless Steel Base, Bracing
Type 300 stainless steel with # 4 polish, satin finish
* Adjustable bullet feet
* Shipped Standard Welded Set-Up, available knocked-down
must specify
* Optional drawers, casters, pot racks, etc. available
* All models are approved by the National Sanitation Foundation and
the U.S. Department of Agriculture.

1 1/2" POLY TOP w/ STAINLESS STEEL BASE

and BRACING

24"WIDE Qty 30"WIDE Qty 36"WIDE Qty

GMT001 - ­GMT002 GMT008 ­GMT003 GMT009 GMT014
GMT004 GMT010 GMT015
GMT005 GMT011 GMT016
GMT006 GMT012 GMT017
GMT007 GMT013 GMT018

1-1/2" Thick

Over All

w/ 2 - 3/4"

Poly

CONSTRUCTION:

* Stainless Steel Bases are TIG welded OPTIONAL
Exposed welds are polished to match adjacent surface

CCESSORIE

MODEL # Qty

MATERIAL:

DRAWER

Top: High Density Polyethylene DRAWER LOCK
Frame: 1 1/2" Square O.D. 18 gauge type 300 tubular stainless steel CASTERS

# 4 polish, satin finish LOWER SHELVES

Bracing: 1 1/4" Round O.D. 18 gauge type 300 tubular stainless steel MEAT BOAT RACK

# 4 polish, satin finish PAPER HOLDER

Legs: 1 5/8" Round O.D., 16 gauge type 300 tubular stainless steel POT RACK

# 4 polish, satin finish K.D. easy - to - assemble

Feet: 1" adjustable stainless steel bullet feet

John Boos & Co

3601 S. Banker Street - Effingham, IL 62401

Phone: [phone] - Fax: [phone]

Email: [e-mail] - Web-site: www. johnboos.com

E-7

DETAILED SPECIFICATIONS

L

W

L

CLEARANCE

L - 3.5"

Shipped Standard Welded Set-Up
Units 7 ft. and larger are furnished with six legs.
All dimensions are typical.
Tolerance +/- .500".

1 1/2" HIGH DENSITY POLYETHYLENE TOP & BRACING

L 24" WIDE WT. 30" WIDE WT. 36" WIDE WT.

24 GMT001 59 ---­30 GMT002 67 GMT008 79 - ­36 GMT003 76 GMT009 89 GMT014 102
40 GMT004 84 GMT010 96 GMT015 110
50 GMT005 101 GMT011 120 GMT016 133
60 GMT006 116 GMT012 137 GMT017 159
72 GMT007 133 GMT013 150 GMT018 183

W

1 1/2"

36 1/4"

12"

John Boos & Co

3601 S. Banker Str.- Effingham, IL 62401 Phone: [phone] - Fax: [phone]

Email: [e-mail] - Web-site: www.johnboos.com

July 2013

John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice

E-8