10" High Boxed Backsplash
"2PBPS1431-1DB" Pro-Bowl Sinks
Two Compartment Sinks w/ 1 Drainboard
Must specify Left or Right
w/ Galvanized Base & Bracing
PREMIUM:
STANDARD:
14 ga. 304 S/S welded Bowls
14 ga. 304 S/S Drainboard and Splash
10" Back Splash
16 ga. 304 S/S welded Bowls
16 ga. 304 S/S Drainboard and Splash
10" Back Splash
STANDARD PREMIUM
16 Gauge
2PBPS1431-1D18 42PBPS1431-1D18
2PBPS1431-1D24 42PBPS1431-1D24
2PBPS1431-1D30 42PBPS1431-1D30
* Standard 16 Gauge (optional 14 gauge)
Type 300 stainless steel with # 3 polish, satin finish
* 12" Deep Bowls (optional 14" deep bowls)
* All Corners, both vertical and horizontal, coved at 5/8" radius
* Bottoms of bowls formed for drainage to 3-1/2" diameter
die stamped opening
* Full length
, with 2" return to
wall at 45 degree and 3/4" turned down rear lip 14" X 31"
* 1-1/2" Faucet Holes in Backsplash
* Solid Stainless Steel front panel, type 300 stainless steel
with # 3 polish, satin finish
* All outside corners of assembly are Bullnosed to
provide safe,clean and polished edge
* Standard legs 1-5/8" diameter, 16 gauge galvanized steel
100% pre-galvanized steel -
(optional stainless steel)
* Legs located directly under sink bowls, providing increased
stability and maximum weight support
Qty
Drainboards
Bowl Sizes:
14 Gauge
Qty
Top: Stainless Steel Sinks are TIG welded, Exposed welds
are polished to match adjacent surface.
Bases: Galvanized Bases are MIG welded
Bowls & 16 gauge stainless Steel (optional 14 Gauge)
Top: Type 300 stainless steel with # 3 polish, satin finish
Legs: 1 5/8" Round O.D., 16 gauge galvanized steel
100% pre-galvanized steel -
Bracing: 1 1/4" Round O.D., 16 gauge galvanized steel
100% pre-galvanized steel Gussets: Stainless Steel
Feet: 1" adjustable galvanized bullet feet
John Boos & Co
315 South First Street - Effingham, IL 62401
Phone: 217-347-7701 - Fax: 217-347-7705
Email: sales@johnboos.com - Web-site: www. johnboos.com
END SPLASHS, RIGHT , LEFT or BOTH
14" DEEP BOWLS
14 GAUGE
FAUCETS
ADD-A-FAUCETS
PRE-RINSE UNITS
LEVEL WASTE
OVERSHELVES
POT RACK
STAINLESS STEEL FEET
BOWLS F G H
14 X 31 36-1/2" 31" 18-7/16"
DETAILED SPECIFICATIONS
2PBPS1431-1D18
2PBPS1431-1D24
2PBPS1431-1D30
14"
12"
10"
43"
42PBPS1431-1D18
42PBPS1431-1D18
42PBPS1431-1D18
14 X 31 X 12 50-3/16" X 36-1/2" 18" 245
14 X 31 X 12 56-3/16" X 36-1/2" 24" 250
14 X 31 X 12 62-3/16" X 36-1/2" 30" 260
14 X 31 X 12 50-3/16" X 36-1/2" 18" 270
14 X 31 X 12 56-3/16" X 36-1/2"
14 X 31 X 12 62-3/16" X 36-1/2"
24" 275
30" 286
All dimensions are typical.
Tolerance +/- .500".
All units ship unassembled for reduced shipping cost.
315 South First - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705
John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice
John Boos & Co
Email: sales@johnboos.com - Web-site: www.johnboos.com
May 2002