"2PB-1DB" Pro-Bowl Sinks - 16 Gauge
Two Compartment Sinks w/ 1 Drainboard
w/ Stainless Steel Base & Bracing
STANDARD:
16 ga. 300 S/S welded Bowls
16 ga. 300 S/S Drainboard and Splash
10" Back Splash
12" or 14" Deep Bowls
16 GAUGE 16 GAUGE
12" Deep
2PB1618-1D18 2PB16184-1D18
2PB1618-1D24 2PB16184-1D24
2PB18-1D18 2PB184-1D18
Qty
14" Deep
FEATURES: 2PB18-1D24 2PB184-1D24
* Standard 16 Gauge 2PB18-1D30 2PB184-1D30
Type 300 stainless steel with # 4 polish, satin finish 2PB1824-1D18 2PB18244-1D18
* 12" & 14" Deep Bowls 2PB1824-1D24 2PB18244-1D24
* All Corners, both vertical and horizontal, coved at 5/8" radius 2PD1824-1D30 2PD18244-1D30
* Bottoms of bowls formed for drainage to 3-1/2" diameter 2PB24-1D24 2PB244-1D24
die stamped opening 2PB24-1D30 2PB244-1D30
* Full length 10" High Boxed Backsplash, with 2" return to
wall at 45 degree and 3/4" turned down rear li
2PB3024-1D30 2PB30244-1D30
2PB3024-1D36 2PB30244-1D36
* 1-1/8" Faucet Holes in Backsplash
* Solid Stainless Steel front panel, type 300 stainless steel
with # 4 polish, satin finish
Must specify Left or Right
Drainboards
* All outside corners of assembly are Bullnosed to
provide safe,clean and polished edge
* Standard legs 1-5/8" diameter, 16 gauge stainless steel
16" X 18" 18" X 24"
Bowl Sizes:
* Legs located directly under sink bowls, providing increased 16" X 20" 24" X 24"
stability and maximum weight support 18" X 18" 30" X 24"
* 36" Drainboards are standard w/ additional stainless steel legs
Qty
CONSTRUCTION:
Top: Stainless Steel Sinks are TIG welded, Exposed welds
are polished to match adjacent surface. OPTIONAL
Bases: Stainless Steel Bases, Standard K.D.
CCESSORIE
Qty
MATERIAL:
Bowls & 16 gauge stainless Steel
Top: Type 300 stainless steel with # 4 polish, satin finish
Legs: 1 5/8" Round O.D., 16 gauge stainless steel
Bracing: 1 1/4" Round O.D., 16 gauge stainless steel
Gussets: Stainless Steel
Feet: 1" adjustable stainless steel bullet fee
END SPLASHS, RIGHT , LEFT or BOTH
FAUCETS
ADD-A-FAUCETS
PRE-RINSE UNITS
LEVEL WASTE
OVERSHELVES
POT RACK
John Boos & Co
3601 S. Banker Street - Effingham, IL 62401
Phone: 217-347-7701 - Fax: 217-347-7705
Email: sales@johnboos.com - Web-site: www. johnboos.com
P-9
BOWLS F G H
16 X 18 23-1/2" 18" 11-15/16"
16 X 20 25-1/2" 20" 12-15/16"
18 X 18 23-1/2" 18" 11-15/16"
18 X 24 29-1/2" 24" 14-15/16"
24 X 24 29-1/2" 24" 14-15/16"
30 X 24 29-1/2" 24" 14-15/16"
DETAILED SPECIFICATIONS
16 GAUGE * 12" DEEP
MODEL BOWL SIZE DIMENSIONS DB WT.
2PB1618-1D18 16 X 18 X 12 54-3/16" X 23-1/2" 18" 250
2PB1618-1D24 16 X 18 X 12 60-3/16" X 23-1/2" 24" 275
2PB18-1D18 18 X 18 X 12 58-3/16" X 23-1/2" 18" 270
2PB18-1D24 18 X 18 X 12 64-3/16" X 23-1/2" 24" 285
2PB18-1D30 18 X 18 X 12 76-3/16" X 23-1/2" 30" 295
2PB1824-1D18 18 X 24 X 12 58-3/16" X 29-1/2" 18" 300
2PB1824-1D24 18 X 24 X 12 64-3-16" X 29-1/2" 24" 315
2PB1824-1D30 18 X 24 X 12 70-3/16" X 29-1/2" 30" 330
2PB24-1D24 24 X 24 X 12 76-3/16" X 29-1/2" 24" 355
2PB24-1D30 24 X 24 X 12 82-3/16" X 29-1/2" 30" 370
2PB3024-1D30 30 X 24 X 12 94-3/16" X 29-1/2" 30" 385
2PB3024-1D36 30 X 24 X 12 100-3/16" X 29-1/2" 36" 400
12" Deep 14" Deep
14" 16"
B 12" 14"
C 10" 10"
D 43" 43"
16 GAUGE * 14" DEEP
MODEL BOWL SIZE DIMENSIONS DB WT.
2PB16184-1D18 16 X 18 X 14 54-3/16" X 23-1/2" 18" 256
All dimensions are typical.
Tolerance +/- .500".
All units ship unassembled for reduced shipping cost.
2PB16184-1D24
2PB184-1D18
2PB184-1D24
2PB184-1D30 18 X 18 X 14 76-3/16" X 23-1/2" 30" 301
2PB18244-1D18 18 X 24 X 14 58-3/16" X 29-1/2" 18" 306
2PB18244-1D24 18 X 24 X 14 64-3-16" X 29-1/2" 24" 321
2PB18244-1D30 18 X 24 X 14 70-3/16" X 29-1/2" 30" 336
2PB244-1D24 24 X 24 X 14 76-3/16" X 29-1/2" 24" 361
2PB244-1D30 24 X 24 X 14 82-3/16" X 29-1/2" 30" 376
2PB30244-1D30 30 X 24 X 14 94-3/16" X 29-1/2" 30" 391
2PB30244-1D36 30 X 24 X 14 100-3/16" X 29-1/2" 36" 406
18 X 18 X 14
18 X 24 X 14
24 X 24 X 14
60-3/16" X 23-1/2"
58-3/16" X 23-1/2"
64-3/16" X 23-1/2"
John Boos & Co
3601 S. Banker Str- Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705
Email: sales@johnboos.com - Web-site: www.johnboos.com
July 2013
John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice
24"
18"
24"
281
276
291
P-10