Joerns Healthcare CareChair-Manual QXDx AutoDG Droplet Digital PCR System Operation Manual

Download

Page 1

User-Service Manual

Joerns® Transport Chairs

CareChair

Tilt-in-Space Chair with Stretcher

Model RCCC550B, RCCC650B, RCCC850B

To avoid injury, read user’s manual before using.

The Caregiver’s Choice

Page 2

Joerns® Transport Chairs CareChair

Important Precautions

Caution: Rotating Parts. Keep ngers and arms clear

of chair’s moving parts when mechanism is operating.

Caution: Pinch Points. While adjusting back or arm

rests, patient’s arms must be inside arm rests.

Caution: Pinch Points. Keep objects away from these

areas while chair is in motion.

Caution: Pinch Points. Keep objects away from arm

rest while lowering.

Warning: Possible Injury Or Death. Do not leave

unattended when on a sloped surface. Lock casters when not in use or unattended. Failure to do so could result in injury or death.

Caution: Keep feet clear of casters. Make sure

casters are locked before transferring patient.

Warning: Possible Injury Or Death. Lock casters

when not in use or unattended. Failure to do so could result in injury or death.

Caution: Use tilt function to level the arm rest before

going into the transfer (stretcher) position. Raise arm rest when patient is in stretcher position.

Caution: Make sure that the pendant cord is properly

positioned before operating the chair. Do not allow cord to get caught in the moving parts of the chair.

Warning: Possible Injury Or Death. Resident/patients

may become entangled in pendant cord. Resident/ patients with reduced mental acuity should not be allowed access to pendant. Unsupervised use of pendant could result in injury or death.

Warning: Possible Injury. Keep all objects from

under chair. Certain parts under the chair raise and lower when the chair is in motion.

Caution: Make sure I.V. rod and oxygen tank are fully

inserted into their holders.

Warning: Possible Shock Hazard. Do not service the

chair without rst disconnecting the power cord.

Caution: Caster lock is not designed to slow motion

of the CareChair while in motion. Do not engage lock pedal while moving the chair.

Caution: Pinch points possible during manual

adjustment of foot rest. Always use both hands when raising or lowering the leg rest

Warning: Possible Injury Or Death. CareChair safe

working load is based per model. This is total weight counting resident/patient, accessories, linens and any other equipment or persons likely to be on chair. Do not exceed safe working load. Exceeding the safe

working load could result in property damage, injury

or death.

Caution: Risk of Personal Injury. In the event worn or

broken part(s) are identied, remove the device from service until repairs are made.

Caution: Risk of Personal Injury. Do not sit on

head or foot end when unit is in the horizontal (stretcher) position.

Warning: Possible Injury. Adjust arm rests only after

the resident/patient is safely positioned in the chair. Failure to do so could result in injury.

Warning: Possible Injury. Prior to operation,

ensure chair has space in the room to tilt and

recline as needed.

Caution: Risk of Personal Injury. Use the push/pull

handles integrated to the back section to move the

chair. Recommend 2 attendants to push occupied

850 lb. chair.

Warning: Possible Injury. Restraining belt is available

for safe operation. Caregiver is obligated to assess if the restraining belt is required to ensure safety of the patient. Serious injury can occur in the event of a fall from the chair.

Caution: Make sure the power cord is unplugged and

stored before moving chair.

Warning: Possible Shock Hazard. Do not operate

this device if the power cord or any of the cords coming from the control module are cut, frayed, damaged or loosely connected.

Warning: Possible Injury. Do not place any body

parts into frame while operating. Stand Clear of the chair’s frame before operating.

Caution: Seat belt adjustment may be required for

patient comfort when articulating the chair.

Caution: Do not use the footrest as a step when

patient sits or stands from the chair.

Warning: Possible Injury Or Death. If using

accessories not manufactured, marketed, or provided by Joerns Healthcare for CareChairs, consult with the manufacturer for compatibility and limitations prior to use. Failure to do so may result in injury or death.

Page 3

Joerns® Transport Chairs

CareChair

Table of Contents

Important Precautions .................................................................................................................2

Introduction Specications Operation Accessories Instructions for Use

..................................................................................................................................3

..............................................................................................................................4

.....................................................................................................................................5

.................................................................................................7

Inspection and Maintenance........................................................................................................8

Cleaning Troubleshooting

......................................................................................................................................8

...........................................................................................................................9

Appendix A.................................................................................................................................10

Warranty

....................................................................................................................................24

Introduction

The Joerns 550B, 650B and 850B Tilt-in-Space CareChairs have been designed primarily for use in hospitals and other institutions to support patients whose weight exceeds the limit of conventional chairs and who may require special positioning.

The welded tubular frames have 3 available seat widths and are designed to support a safe working load of 550, 650 and 850 lbs. respectively. The power-assisted positioning reduces strain on the caregiver while offering convenient pressure redistribution for the patient. The on-board battery operation allows full facility mobility improving the dignity of care to the most challenging patients.

The chairs adjust from a full upright sitting position to a full stretcher position. They tilt back to redistribute the patient’s weight, aiding in comfort and pressure relief. The chairs also tilt forward to assist in patient’s egress. When in the supine position, the patient can receive treatment, emergency care or be more easily transferred from the chair to a bed. While in the stretcher mode, the chair has the ability to go into the trendelenburg position.

The chairs are equipped with a central steering and locking system which provides convenient, one step access to the steering and total lock functions. The 6" swivel casters allow for easy chair movement to facilitate patient transport.

Save These Instructions

Thank you and congratulations for choosing Joerns CareChairs. Joerns transport chairs are developed with safety, comfort and convenience of both residents/patients and caregivers in mind.

For More Information

To learn more about compliance options with Joerns products, visit our website at www.joerns.com, or contact our Customer Care at 800-826-0270 and ask for free informational publications.

Advanced ergonomic patient handling will provide years of reliable service in your facility.

Page 4

Joerns® Transport Chairs CareChair

Speciﬁcations

550B 650B 850B Weight Capacity 550 lbs. (250 kg) 650 lbs. (295.5 kg) 850 lbs. (386.4 kg) Chair Weight 180 lbs. (81.8 kg) 196 lbs. (89.1 kg) 210 lbs. (95.5 kg) Overall Width 32" 35" 39" Seat Depth 18" 18" 19" Back Angle 0-65° Tilt Angle 0-15° Seat Height Above Floor Chair Position: 24"

Stretcher Position: 30"

Arm Rest (side rail) Height Above Seat

Power Requirements

Battery

Environmental Conditions

Foot Rest Length adjustable individually, manual 0 - 5" Leg Rest Angle adjustable individually, manual and affected by other position changes

Casters

Standard

Options Shipping Weight Approximately 300 lbs. (plus accessories)

Chair Position: 7" - 18" Stretcher Position: 1" - 10"

Power: 120 VAC Frequency: 60 Hz Current Rating: 4.0 Amps Mode of Operation: 10% Maximum Duty Cycle 2 minutes on/18 minutes off Circuit Protection: Auto Reset Current Sensor

We suggest the batteries be charged for 24 hours prior to rst use. Thereafter, when the battery capacity is approximately 0% it takes about 4-5 hours to reach 80% of the battery capacity level. We recommend a charging time up to 10 hours which gives 100% capacity. To achieve optimum battery life, keep the chair plugged in at all times when chair is stationary.

Operating Conditions

Ambient Temperature: +10°C to +40°C Relative Humidity: 30% to 75% Non-Condensing Atmospheric Pressure: 700 hPa to 1060 hPa Protected Against Splashing Water: IPX4

Storage and Shipping Conditions

Ambient Temperature: -40°C to +70°C Relative Humidity: 10% to 100% Atmospheric Pressure: 500 hPa to 1060 hPa

Diameter: 6" Width: 3" Operated by central steer/lock system Tread Guards: Non-marring

Oxygen Tank Holder, Inclinometer, Captive IV Rod and Holder (adjustable height), 4-way stretch Urethane padded cushion cover

Tray - Not yet available on 850 model Commode Seat

Page 5

Joerns® Transport Chairs

CareChair

Operation

Instructions for use of 550B, 650B, 850B Tilt Chair Battery Electronic Controlled Convert & Tilt

Whenever making adjustments to the CareChair, the brakes must be on.

Caution: When adjusting position of back, exercise caution that patient arms are inside arm rests.

Position Adjustment

Lock the wheels before changing the chair position

A good operating procedure is to charge the unit, by keeping it plugged in, when not in use. You cannot overcharge the system by leaving the unit plugged in.

The control box duty cycle: max. 10% or 2 minutes continuous use followed by 18 minutes not in use. The control box has electronic overload protection. The current will be cut off when the control box is not in use.

Pendant Functions (Figure 1)

1. Button converts chair to horizontal position

2. Button converts chair to seat position

3. Button tilts chair forward to assist in egress from chair

4. Button tilts chair back for comfort in the chair position, in the horizontal position the

head end can be tilted down into the trendelenburg position (Figure 2).

Figure 2

1 2

3 4

Figure 1

Page 6

Joerns® Transport Chairs CareChair

Brake Pedal Position (Figure 3)

1. BRAKE ON: All (4) wheels locked from rolling

and swiveling.

2. BRAKE OFF: All (4) wheels unlocked free to roll

and swivel.

3. STEER ON: (3) Wheels unlocked, free to roll and

swivel, and one wheel is locked in the in-line position. This allows the chair to have better steering control.

Leg Rest Height Adjustment (Figure 4)

To Raise

1. Move lever to lock position

2. Move leg rest up to desired height. Leg rest will automatically lock into desired position

To Lower

1. Raise leg rest slightly and hold

2. Move lever to unlock position

3. Lower leg rest

Leg Rest Length Adjustment (Figure 5)

1. Hold foot rest

2. Swing and hold locking bar

3. Move foot rest to desired length

4. Release locking bar and move foot rest slightly until

pin snaps into locking hole.

Arm Rest Adjustment (Figure 6)

1. Grasp arm rest in center directly above vertical

square tubing

2. Pull spring loaded locking pin toward head-end

3. Move arm rest to desired height

4. Release pin and move arm rest slightly up or down

until the pin snaps into locking position.

Figure 4

Figure 5

Figure 6

Figure 3

Page 7

Accessories Instructions for Use

Caution: Make sure all accessories are properly

inserted into holders and storage locations prior to patient use or transport.

Oxygen Tank Holders

Insert oxygen tank into holder.

I.V. Rod and Assembly

1. The I.V. Rod is attached by chain to the back of the chair.

2. The Rod can be used on either side of the chair by

inserting it into the hole in the arm rest on either side.

3. To adjust the height of the I.V. pole, loosen the locking

knob and extend the rod to the desired height, then tighten the locking knob.

4. When not in use collapse the rod and store in the storage

tube under the chair.

Joerns® Transport Chairs

CareChair

Patient Tray

1. Insert tube on tray into tube on the left

hand arm rest.

2. When tray is in place, tighten tray

locking knob.

Note: The tray cannot be used as a restraint.

Note: Tray is not available on the 850 model

at this time.

Commode Seat Assembly

1. Remove seat cushion retainer clips from

under seat.

2. Lift seat cushion and remove from chair

(recline chair slightly to assist in easy removal).

3. Remove commode bucket lid and place

patient in chair.

4. Remove, empty and clean commode bucket.

5. Replace bucket, lid and seat cushion.

Replace seat cushion retaining clips.

Page 8

Joerns® Transport Chairs CareChair

Inspection and Maintenance

The amount of maintenance required by the chair will be dictated by its use. At a minimum, the unit should be periodically inspected every 6 months.

Periodic Inspection

1. Check for any loose threaded ttings.

2. Check for torn or soiled upholstery.

3. Check for freedom of motion at all pivot points.

4. Check for freedom of motion of all casters, rolling and swivel

5. Check for tightness of caster brakes with brake lever ON.

6. Check for proper operation of steering lock caster on right front, when standing behind the chair.

Maintenance

1. After a week or two of usage, check all the bolts to be sure that none of them have worked loose and that all pins

are in their normal location and securely fastened. Check all welds.

2. Correct any problems discovered during the inspection.

3. Lubricate all pivot points, pins and bolts as required with one drop of light machine oil at each point every

6 months.

4. Check all electrical connections for tightness.

5. Check all electrical wiring for fraying, kinking damage and/or deterioration.

IF ANY DISCREPANCIES ARE NOTED DURING INSPECTION, THEY MUST BE CORRECTED BEFORE CONTINUED USE OF THE CHAIR.

CAUTION: Used batteries are potentially hazardous to the environment if they are not disposed of properly. Heavy

metals, corrosive acids, and lead may seep out from batteries that are carelessly disposed potentially contaminating bodies of water, and harming wildlife and/or humans. Dispose of worn-out batteries at your local recycling center, in the same manner as a lead-acid automotive battery.

Joerns Healthcare Technical Support can provide additional assistance to repair or troubleshoot any problems.

Major service and repair must only be performed by authorized Joerns Healthcare Technical Support, which you may contact at 800.966.6662.

Cleaning

Caution: Possible Shock Hazard. Possible damage to electrical parts, and/or shock hazard.

Warning: Possible Injury. Lock casters when cleaning, inspecting or performing any maintenance on the chair.

1. Clean all electrical components (motors, control box, pendant and cords) on your Joerns

well-wrung out cloth. Excess water in or on electrical parts, could damage these components. Do not submerge pendant in liquid.

2. Your Joerns chair features durable, baked-on epoxy nish that is easily cleaned with mild solution of antiseptic cleaner and warm water. Read and follow all label instructions on your cleaning products.

3. If there is no visible soilage with possible body uids, we recommend that you clean the cushion surfaces with a

mild detergent and warm water. If disinfection is desired, you may use a combination cleanser/ disinfectant.

chair with damp,

Page 9

Troubleshooting

Problem Possible Cause Solution

Activating pendant button results in

no action

Activating pendant button causes a

click noise in the controller but no

motor action

Dead battery Recharge battery

Defective battery Replace battery

Loose wires

Defective wiring between battery box

and actuator

Defective actuator

Joerns® Transport Chairs

CareChair

Check if pendant is properly plugged in. If it still does not operate, replace battery.

Replace actuator

Plug defective actuator into the other actuators controller socket. If actuator still does not operate, replace actuator.

No functions work

Pendant

Chair does not roll straight Position of caster pedal Adjust pedal to steer position.

Leg rest is too high Leg rest position

Angle of leg rest improper Leg rest lever position

If the above does not resolve the problems, call Joerns Healthcare T

serial number of the chair and make the phone call from as close to the chair as practical.

Some functions work and some do

not

Functions working opposite of how

they are supposed to operate

echnical Support at 800.966.6662. Have the

Check that pendant is properly plugged in.

Replace pendant.

Reverse actuator plugs in controller.

Raise or lower leg rest with pin position desired.

Adjust leg rest angle using the lever next to the leg rest.

Page 10

Joerns® Transport Chairs CareChair

Appendix A - Wiring Diagram

Page 11

Appendix A - Frame Assembly

Joerns® Transport Chairs

CareChair

Page 12

Joerns® Transport Chairs CareChair

Appendix A - Chassis Assembly

Page 13

Appendix A - Back and Arm Assembly

Joerns® Transport Chairs

CareChair

Page 14

Joerns® Transport Chairs CareChair

Appendix A - Seat and Leg Assembly

Page 15

Appendix A - Upholstery Assembly

Joerns® Transport Chairs

CareChair

Page 16

Joerns® Transport Chairs CareChair

Appendix A - Back Frame Assembly

Page 17

Appendix A - Label Locations

Joerns® Transport Chairs

CareChair

Page 18

Joerns® Transport Chairs CareChair

Appendix A - Parts List

Item Part No. Description

1 100164-0 Pin, Spring Guide

2 100192-1 Ratchet, Leg Adjustment

3 100963-0 Pin, Seat Retainer 4 100965-0 Bracket, Back Retainer 5 101365-0 Sleeve, Friction, Long

6 101366-0 Sleeve, Friction, Short

7 102652-0 Pivot Pin Tilt Chair, 1.136" LG 8

10 102672-0 Pointer, Inclinometer 11 102676-0 Bracket, Restraining Belt

12 102702-0 Shaft, Front Frame Pivot

13 102703-0 Shaft, Seat/Back Pivot 14 39001552 Pinch Shield, Outer, LH 15 39001553 Pinch Shield, Outer, RH 16 39001554 Pinch Shield, Inner, LH 17 39001555 Pinch Shield, Inner, RH 18 102749-0 Shaft, Pinch Shield, 2.062" LG 19 102782-0 Wear Strip, Tilt Chair Side Panel

21 105122-0 Spacer, Pinch Shield

102670-0GY

102670-0SL

102671-0GY

102671-0SL

103311-0GY

103311-0SL

39001556GY

39001556SL

39001557GY

39001557SL

39001558GY

39001558SL

39001559GY

39001559SL

39001531GY

39001531SL

39001532GY

39001532SL

Dial Plate Inclinometer, LH

Dial Plate Inclinometer, RH

Rod, Connecting Wheels

Weldment, PAWL, RH, Leg Height Adjustment

Weldment, PAWL, LH, Leg Height Adjustment

Weldment, PAWL, Height Adjustment, Base, RH

Weldment, PAWL, Height Adjustment, Base, LH

Assembly, PAWL, RH

Assembly, PAWL, LH

Page 19

Appendix A - Parts List

Item Part No. Description

35 31009625 Assembly, Leg Support, Adjustment Plunger

36 300079-0 Assembly, Cushion, Arm Rest

37 300228-0 Assembly, Side Panel, RH, Tilt Chair 38 300229-0 Assembly, Side Panel, LH, Tilt Chair 39 40

44 45 900005-0 Cap, Square, 1"

46 900014-0 Screw, #14 x ⅝" LG., Pan Head Phillips, Type A

47 900016-0 Nut, ¼-20 Hex, ESNA 48 900045-0 Nut, 5/16-18 Hex, ESNA 49 900049-0 Detent, Valcro #8-141 50 900050-0 Buckle, 2" Black 51 900051-0 Plunger, Southco

52 900053-0 Screw, #10 x ¾" LG., Flat Head Phillips

53 900059-0 Screw, ¼-20 x ¼" LG., Socket Set, ½ Dog Point 54 900063-0 Bolt, Hex, 5/16-18 x 2¼" LG 55 900070-0 Dowel, Pin, 3/32" DIA x ½" LG

56 900073-0 Spring, Compression

57 208-0510 Washer, Flat, #10 (Old Part Number: 900075-0) 58 900076-0 Bolt, Hex, 5/16-18 x 1"LG 59 900085-0 Washer, Lock, ¼" Internal Tooth

60 900087-1 Caplug, 1" Black Plastic

61 900088-0 Bolt, Hex, ¼-20 x 2¼" LG

62 900100-0 Tip, ¼" DIA Rod

64 900103-0 Washer, Lock, #10 Internal Tooth

65 900111-0 Screw, #10 x ⅝" LG., Pan Head Phillips, Type A

66 900122-1 Lever, Transmission

67 900147-0 Bolt, Hex, ¼-20 x 1" LG

68 900157-0 Pin, Hair Cotter

69 900238-0 Screw, #8-32 x ½" LG., Pan Head Phillips

70 900258-S Washer, Lock, ¼" Split 71 900259-S Nut, ¼-20 Hex

72 900262-0 Bumper, Rubber ⅜" x ¼"

39001567GY

39001567SL

39001568GY

39001568SL

300143-0GY

300143-0SL

300144-0GY

300144-SL

Assembly, Arm Support, LH, Dual Guide

Assembly, Arm Support, RH, Dual Guide

Assembly, Inclinometer, LH (Old Part Number: 400067-0)

Assembly, Inclinometer, RH (Old Part Number: 400068-0)

Joerns® Transport Chairs

CareChair

Page 20

Joerns® Transport Chairs CareChair

Appendix A - Parts List

Item Part No. Description

73 900282-0 Washer, ¼" x ¾" x 1/16", Nylon 74 900358-0 Retaining Ring 75

76 900419-0 Washer, ½" x ¾" x 1/16", Nylong

77 78 900609-0 Rivet, Pop, ⅛" DIA x 3/16" Alum 79 900614-S Nut, #8-32 Hex Nylock 80 900658-0 Caplug, 1" x 2" 81 900888-0 Screw, 5/16-24 x 5/16" LG., Nylon Tip

82 900990-0 Screw, ¼-20 x ⅜" LG., Button Head, Socket

83 900991-0 Washer, ⅜" x ¾" x 1/16", Nylon 84 900992-0 Screw, #8-32 x ¼" LG., Button Head 85 901013-0 Knob

86 901016-0 Washer, 5/16" x ¾" x 1/16", Nylon

87 901061-0 Screw, #10-32 x ½", LG., Round Head Phillips 88 901086-0 Nut, 5/16-18 Hex ESNA 89 902015-0 Wheel, Tente 90 903194-0 Screw, #6 x ⅜" LG., Phillips 91 208-0509 Washer, Flat, #8 (Old Part Number: 903205-0)

92 903212-0 Shoulder Bolt, ⅜" DIA x ⅝" LG

93 903502-0 Label, Warning Keep Feet Clear 94 903526-0 Label, Leg Length Release Pin, RH 95 903527-0 Label, Leg Length Release Pin, LH

96 903528-0 Label, Leg Elevation On/Off, RH

97 903529-0 Label, Leg Elevation On/Off, LH 98 903530-0 Label, Caution Pinch Area

99 903531-0 Label, Arm Adjust Pin, RH 100 903532-0 Label, Arm Adjust Pin, LH 101 903533-0 Label, I.V. Pole Socket, RH

102 903534-0 Label, I.V. Pole Socket, LH

103 903535-0 Label, Wheel Lock 104 903536-0 Label, Swivel Lock 105 903554-0 Label, Logo, Care Givers Choice

106

107 903557-0 Label, Inclinometer, RH 108 903558-0 Label, Inclinometer, LH 109 903559-0 Label, Caution I.V. Rod & Oxygen Tank 110 903560-0 Label, Caution Before Transfer

111 903593-0 Pin, Cotter, ⅜" DIA Shaft

112 903608-0 Screw, ¼-20 x 5/16" LG. Socket Set, Cup Point

113 903627-0 Screw, ¼-20 x ⅜" LG., Flat Head Phillips

Page 21

Joerns® Transport Chairs

Appendix A - Parts List

Item Part No. Description

114 903630-0 Screw, 6mm x 10mm Pan Head Phillips 115 39001560 Caster, Total Lock

116 39001561 Caster, Steer Lock

117 903638-0 Rivet, Pop, ⅛" DIA x 56/16" LG., Steel 118 903651-0 Plug, Finishing, 0.500" ID Black Poly 119 903652-0 Plug, Finishing, 1¼" ID Steel

120 903654-0 Bearing, Nylon, Double Flange, 1" ID

121 903667-0 Rivet, Blind ⅛" DIA x ⅜" LG Aluminum

122 903679-0 Plug, Rectangular Tube, ½" x 1½"

123 903707-0 Screw, #6 x ½" LG., Flat Head Phillips, Wood

124 903718-0

125 39001562 Lever, Caster Locking, Double Lever

126 903995-0 Plug, Caster Lever, Red

127 903996-0 Plug, Cater Lever, Green

128 904071-0 Cable Clamp, 3/16" Nylon

129 904098-0 Terminal Ring, 16-14 AWG

130 904120-0 Cable Clamp, ¼" Steel, Vinyl Coated 131 39001563 Actuator, Linak, 374mm Install, 192mm Stroke

132 39001564 Actuator, Linak, 300mm Install, 92mm Stroke

133 904182-0 Pendant, CareChair, Linak 134 39001565 Controller, CareChair, Linak 135 39001566 Battery, CareChair, Linak

136 904190-0 Pin, Clevis, 10mm x 60mm LG.

137 11012283 Cordset, Angled Mains and Control Box End (Old Part Number: 904203-0) 138 12160281 Cable Tie, 10" (Old Part Number: 904207-0) 139 904208-0 Screw, #8-32 x ¾" LG., Pan Head Phillips 140 904210-0 Placard, Chair Instructions, Linak 141 904071-0 Cable Clamp (Old Part Number: 903233-0)

142 903653-0 Screw, 10-24 x ½" LG. Self Tapping, Hex Washer Head

143 102769-0 Strap, Chair Cord Hanger, Velcro Loop 144 106459-0 Strap, Cord Hanger, Velcro Hook 145 903489-0 Label, Power Cord Hanger

Screw, #6 x ⅝" LG., Pan Head Phillips, Sheet Metal

CareChair

Page 22

Joerns® Transport Chairs CareChair

Appendix A - Chair Conversion List

Chair Model Number

550 650 850

Item Description Part No. Part No. Part No.

200 Shaft, Legs 100906-0 105039-0 105040-0

201 Shaft, Arm Link & Back Pivot 102760-0 102759-0 102757-0

202 Shaft, Back Support 104306-0 102709-0 102701-0

203 Rod Caster Brake, Front 39001537 39001538 39001539

204 Belt, Restraining, 8 104338-0 104339-0 104340-0

205 Rod, Caster Brake, Rear 39001534 39001535 39001536

206 Weldment, Tie Tube Adj Lever

207 Weldment, Leg Support, LH

208 Weldment, Leg Support, RH

209

210

211

212

213 Weldment, Foot Plate

214

215 Assembly, Cushion, Seat 300086-0 300095-0 300189-0

216 Assembly, Cushion, Back 300087-0 300096-0 300190-0

217 Assembly, Cushion, Lower Leg 300088-0 300097-0 300191-0

218 Assembly, Cushion, Foot 300089-0 300098-0 300192-0

219 Assembly, Cushion, Upper Leg 300090-0 300099-0 300193-0

220 Label, Do Not Sit 903544-0 903545-0 903546-0

39001551GY

39001551SL

39001548GY

39001548SL

39001547GY

39001547SL

39001549GY

39001549SL

39001541GY

39001541SL

39001544GY

39001544SL

39001543GY

39001543SL

39001533GY

39001533SL

39001542GY

39001542SL

39001546GY

39001546SL

39001545GY

39001545SL

39001540GY

39001540SL

Page 23

Notes

Joerns® Transport Chairs

CareChair

Page 24

Joerns Healthcare Warranty Program

for Joerns® CareChair

Joerns CareChair, Model 550B, 650B and 850B, are guaranteed for a period of ve years from the date of delivery, against defects in materials and workmanship, under normal use and service.

A two-year warranty includes all mechanical and electrical components.

A one-year warranty includes all upholstery and caster components.

Steel structural components on chairs are covered under warranty for a period of ve years from the date of delivery.

Welds are covered under warranty for the lifetime

the product.

Damage caused by use in unsuitable environmental conditions, abuse or failure to maintain the product in accordance with user and service instructions is not covered.

Any alteration, modication, or repair unless performed by or authorized in writing by Joerns Healthcare, will void this warranty.

Joerns Healthcare’s obligation under this warranty is limited to supplying replacement parts, servicing or replacing, at its option, any product which is found by Joerns Healthcare to be defective.

Warranty replacement parts are covered by the terms of this warranty until the product’s original stated warranty period expires.

When requested by Joerns Healthcare, parts must be returned for inspection at the customer’s expense. Credit will be issued only after inspection.

Service

Most service requests can be handled by the facility Maintenance Department with assistance from the Joerns Healthcare Product Service Department.

Most parts requested can be shipped next day air at the customer’s expense.

Should a technician be required, one will be provided by Joerns Healthcare, at our discretion. Only the Joerns Healthcare Product Service Department can dispatch authorized technicians.

Parts

This warranty is extended to the original purchaser of the equipment.

Joerns CareChairs contain various parts that wear from normal use, such as batteries. These parts are not covered under the stated warranty but are covered for 90 days after date of delivery.

Manufactured by:

Joerns Healthcare 2100 Design Rd.

Weld lifetime dened as 15 years.

Post Acute, Acute, HomeCare

2430 Whitehall Park Dr. Ste 100 Charlotte, NC 28273 (P) 800.826.0270 (F) 800.457.8827

VA/Government

19748 Dearborn Street Chatsworth, CA 91311 (P) 800.966.6662 (F) 800.232.9796

Canadian Ofce

4056 Meadowbrook Dive, Unite #148 London, ON Canada N6L 1E5 (P) 866.546.1151 (F) 519.451.8662

Arlington, TX 76014

United Kingdom and Other Countries

+44 (0)844 811 1156 +44 (0)844 811 1157

Netherlands

+31 (0)30 6363700 +31 (0)30 6363799

Joerns Healthcare CareChair-Manual QXDx AutoDG Droplet Digital PCR System Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual