© 2019 Jobar International, Inc.
Carson, CA 90745
Made in China
Rechargable Vanity Light
INSTRUCTIONS
[090319]
9/5/19 9:46 AM
Charging Rechargeable Battery:
Connect USB cable (B) to power source. LED light (C) will turn
red during charging and green when fully charged. Unplug unit
when fully charged.
Installation:
Important: for best results make sure surface is flat, clean, and
non-porous.
Wet suction cups (D). Attach unit to clips (D). Position unit as
desired. Clips (D) can be rotated 360 degrees if needed.
How to Use:
Tap unit (C) to turn light on. Continue tapping to increase brightness or to turn off. Unit contains 3 levels of
brightness: low, medium, and high.
Cleaning:
Occasionally clean with a damp cloth. Note: never use solvents
or abrasive cleaning agents.
Vertical: Horizontal: Charging:
CAUTIONS:
To prevent electrical shock, damage, or possible injury, keep
away from moisture, water, or liquids.
Always unplug unit from electrical power sources before
each use.
9/5/19 9:46 AM