
JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
User Guide
JMC-UB5A0 N4 Hybrid / SDI

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Introduction
UB5A0 N4 SDI is a high-quality, high-performance capture device which is specially designed for high-definition
video capture applications. It supports up to 4 channel of video inputs with USB3.0 connectors to connect with signal
sources. With software support, UB5A0 N4 SDI can record live video from UB5A0 N4 SDI via USB 3.0 sources into
MPEG4 or H.264 files..
Product Specification
SC5A0 Product Series Hardware Specification
Hardware Compression, Real-Time Mode
250mm x 129.8mm x 41.9mm(with foot pad +5mm)
USB 3.0 x1,Power switch x1, DC Jack x1, RS485 × 1
4 × SDI
1 ×Composite, 1 × S-video , 1 × YPbPr , 1 × HDMI, 1 × DVI , 1 × VGA
Recording
Video Resolution
3G-SDI
1920×1080p@60/50fps
HD-SDI
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50/30/25fps
SD-SDI
720×480i@60fps
720×576i@50fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
SDI Embedded Audio × 4
Audio line in × 4
RCA (Audio L/R through component cable) × 2
Stereo / 16-bit / 32000 ~ 48000Hz
VC++ / C# / .NET / VB / V4L2

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Windows XP / Vista / Windows 7
Windows 8 / Windows 8.1/ Windows 10
Linux 2.6.14 or Higher
( 32-bit and 64-bit )
1、 Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
Plug the power cord and turn on UB5A0 power button
Connect USB3.0 cable to PC/Laptop
3.1. Signal Source Connection
Connection Diagram
4. Software Installation
1.Driver : Yuan Driver
2.Application : vMix Software
4.1. Yuan Driver (Windows XP, Windows Vista, Windows 7, Windows 8/8.1, Windows 10)
Install the driver, click ‘DRIVER.QP0204_YS 1.1.0.149.0.exe
Follow by the icon below to complete install procedure

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Step 1: Click driver icon
Step 2: Shows driver name, version and architecture
Step 3: Enter user name and organization

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Step 4: Start installation
Step 5: Trust the software provider
Step 6: Complete the driver installation

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Step 7: After driver installation success, the driver package will acquire an reboot
Step 8: After reboot, the UB5A0 N4 SDI Hybrid shows in Device Manager
Users shall get 4 QP0204 USB devices
4.2. vMix Software
Step 1: Open vMix software

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Step 2: Select Camera and format , then press OK
Example:
Camera : QP0204 USB, Analog 03 Capture
Input : SDI
Resolution : 1920x1080
Frame Rate : NTSC 59.94p
Video Format : H264 Low Latency

JMC Systems Engineering AB www.jmc.se +46-8-82 82 70 info@jmc.se
Step 3: After press OK, the vMix will start to action
Below is some information about latency with UB5A0 N4 Hybrid
*QCAP is the testing program from our SDK