JL Audio Stealthbox SB-POL-SLINGSUBD/10W3v3-4, Stealthbox SB-POL-SLINGSUBD/10W3v3-2 Installation Manual

Enclosure Type: Sealed
Driver Type: 10W3 v3
Nominal Impedance: 4 or 2 ohms
Continuous Power Handling: 500 watts (RMS method)

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to per form the installation yoursel f, it is absolutely
vital that the Stealthb ox

®

be properly mo unted to the vehicle
according to these instr uctions. Failure to mount the enclosure
properly presents two problems:

1) The sub -bass performance will suf fer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A l oose enclosure presents a serious s afety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DI FFIC ULT Y:

ESTIMATED TIME:

1 HOUR

Continued on Next Page

1

5

OUT

OF

SB-POL-SLINGSUBD/10W3v3 INSTR_SKU# 011482

INSTALLATION GUIDE

for the

SB-POL-SLINGSUBD/10W3v3-4

SB-POL-SLINGSUBD/10W3v3-2

SKU# 94637 (4 W) & 94638 (2 W)

2015-Up Polaris Slingshot

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2017

SB-POL-SLINGSUBD/10W3v3 INSTR_SKU# 011482

BOM ID Qty SKU Description

1 2 153814 8 - 32 x 1/2” Pan Head Phillips Machine Screw
2 1 153850

ABS Plate
3 2 153855 M6 - 1 x 50mm Hex Drive Flanged Button Head Screw
4 4 153858 Nylon Plastic Washer
5 2 153853 M6 - 1 x 25mm Hex Drive Flanged Button Head Screw
6 4 153856 M6 - 1 U-Nut
7 1 153848 Bottom Bracket
8 1 150285 Nylon Cable Tie
9 1 153847 Top Bracket

- 1 153857 3/4” x 3/4” EPDM Foam (not shown)

- 1 150249 Foam Tape (not shown)

Note: For optimum p erformance, JL Audio recomme nds applying the included Foa m Strips (or sound damping material) to surro unding plastic panels to redu ce unwanted vibrations.