JL Audio Stealthbox SB-POL-RZG2/10TW3 Installation Manual

Continued on Next Page

SB-POL-RZG2/10TW3 INSTR_SKU# 011446

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to per form the installation yoursel f, it is absolutely
vital that the Stealthb ox

®

be properly mo unted to the vehicle
according to these instr uctions. Failure to mount the enclosure
properly presents two problems:

1) The sub-bass per formance will suffer due to the m ovement of the

enclosure caused by the force exerted by th e woofer(s).

2) A loose enclosure p resents a serious safety haz ard in the event of a

collision or sudden deceleration.

INSTALLATION

DI FFIC ULT Y:

ESTIMATED TIME:

2 HOURS

2

5

OUT

OF

Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)

INSTALLATION GUIDE

for the

SB-POL-RZG2/10TW3

SKU# 94620

2014 & Up Polaris RZR XP 1000, RZR XP 4 1000,

RZR 900 XC, & RZR 4 900

INCLUDED HARDWARE

Continued on Next Page

Page 2 • JL Audio, Inc., 2016

SB-POL-RZG2/10TW3 INSTR_SKU# 011446

Note: For optimum p erformance, JL Audio recomme nds applying the included Foa m Strips (or sound damping material) to surro unding plastic panels to redu ce unwanted vibrations.

* Pre-installed on enclosure

BOM ID Qty SKU Description

1 4 153729 1/4 - 20 x 1” Stainless Steel Serrated Flange Bolt
2 1 153678

Side Bracket
3* 5 153728 1/4 - 20 x 1-1/2” Stainless Steel Low Prole Cap Screw
4* 1 150867 Black Starboard Bae

5 1 153730 3/8 - 16 x 1-1/4” Stainless Steel Serrated Flange Bolt
6 1 153731 3/8” Stainless Steel Serrated Spring Lock Washer
7 2 153732 3/8” Stainless Steel 1” Diameter Flat Washer
8 1 153677 Top Bracket

9 1 151140 3/8 - 16 U-Nut
10 2 153735 #8 x 1/2” Stainless Steel Pan Head Screw
11 1 153707 Glove Box Latch
12 1 153676 Bottom Bracket
13 1 153734 1/4” Stainless Steel 5/8” Diameter Flat Washer
14 1 153733 #12 x 3/4” Stainless Steel Phillips Pan Head Screw

- 1 150249 Foam Strips (not shown)

POWER RECOMMENDATION

JL Audio recommends high quality amp liers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the
amplier settings, consult the own er’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

CONNECTIONS

Using quality power, signal, and speaker wire is essential in ensuring the p erformance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should b e used to provide signal for
both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as the XC-BCS12-25.

Continued on Next Page

Page 3 • JL Audio, Inc., 2016

SB-POL-RZG2/10TW3 INSTR_SKU# 011446