JL Audio Stealthbox SB-K-SORNTO/10TW3 Installation Manual
INSTALLATION GUIDE
for the
SB-K-SORNTO/10TW3
SKU# 94539
2009 & Up Kia Sorento
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
If you choose to per form the installation yoursel f, it is abso lutely vital that
the Stealthbox
®
be properly mo unted to the vehicle according to these
instructions . Failure to mount the enclosure prop erly presents two problems:
1) The sub-bass per formance will suffer due to the movement of the enclosure
caused by the force exe rted by the woofer(s).
2) A loose enclosure pres ents a serious safety haza rd in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-K-SORNTO/10TW3 INSTR_SKU# 011335
IN STALL ATIO N
DIFFICULTY:
2
5
OUT
OF
ESTIMATED TIME:
2 HOURS
SPECIFICATIONS
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS Method)
INCLUDED HARDWARE
(1) Bracket
(1) 3/8 - 16 U-Nut
(1) 3/8 - 16 x 2-1/4” Set Screw
(1) 3/8” Flat Washer
(1) 3/8” Lock Washer
(1) 3/8 - 16 Hex Nut
(1) 1/4 - 20 x 1” Hex Bolt
(1) 1/4” Lock Washer
(2) 1/4” Flat Washer
(1) 1/4 - 20 Hex Nut
(1) 6mm Flange Nut
SB-K-SORNTO/10TW3 INSTR_SKU# 011335
POWER RECOMMENDATION
JL Audio recommends hi gh quality ampliers such as the J L Audio XD300/1. The di agram below shows the recommend ed crossover settings for the XD300/1. For a detaile d description of the amplier se ttings, consult the
owner’s manual for the a mplier. If another amplier is being us ed, please reference this illustr ation and use similar settings on tha t amplier.
CONNECTIONS
Using quality powe r, signal, an d speaker wire is essential in ensuring the p erformance of your Stealthbox ®. JL Audio re commends using a 4 AWG power kit such as the XD- PCS4-1B for your Stealthbox® amplier. Other k its
are available should yo u be using more than one amplier. Signal wire su ch as the JL Audio Premium Audio Interconnec t Cables should be used to provid e signal for both channels of the ampli er. JL Audio
reccomends using 12AWG speaker wire for subwo ofers.
Continued on Next Page Page 2 • JL Audio, Inc., 2013
Loading...