JL Audio Stealthbox SB-HY-VELOSTR/10TW3 Installation Manual
INSTALLATION GUIDE
for the
SB-HY-VELOSTR/10TW3
SKU# 94570
2011 & Up Hyundai Veloster
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
If you choose to per form the installation yoursel f, it is abso lutely vital that
the Stealthbox® be properly mo unted to the vehicle according to these
instructions . Failure to mount the enclosure prop erly presents two problems:
1) The sub-bass per formance will suffer due to the movem ent of the enclosure
caused by the force exe rted by the woofer(s).
2) A loose enclosure presents a serious safety haza rd in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-HY-VELOSTR/10TW3 INSTR _SKU# 011355
IN STALL ATIO N
DIFFICULTY:
3
5
OUT
OF
ESTIMATED TIME:
23 HOURS
SPECIFICATIONS
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
INCLUDED HARDWARE
(2) 3/8 - 16 x 2-1/2” Bolt
(9) 3/8” Fender Washer
(4) 3/8” Flat Washer
(4) 3/8” Lock Washer
(6) 3/8 - 16 Hex Nut
SB-HY-VELOSTR/10TW3 INSTR _SKU# 011355
POWER RECOMMENDATION
JL Audio recommends hi gh quality ampliers such as the J L Audio XD300/1v2. The dia gram below shows the recommende d crossover settings for the XD300/1v2. For a detailed d escription of the amplier set tings, consult the owner’s manual f or the amplier. If another amplier is be ing used, please reference this ill ustration and use similar settin gs on that amplier.
CONNECTIONS
Using quality powe r, signal, a nd speaker wire is essential in ensuring th e performance of your Stealthbox ®. JL Audio re commends using a 4 AWG power kit such as the XD -PCS4-1B for your Stealthbox® amplier. Other k its
are available should yo u be using more than one amplier. Signal wire s uch as the JL Audio Premium Audio Interconnec t Cables should be used to provi de signal for both channels of the ampli er. JL Audio
recommends using 12AWG speaker wire for su bwoofers.
Continued on Next Page Page 2 • JL Audio, Inc., 2016
Continued on Next Page
SB-HY-VELOSTR/10TW3 INSTR _SKU# 011355
Page 3 • JL Audio, Inc., 2016
STEP 4
Carefully unclip and remove the hatch sill panel.
STEP 8
Carefully unclip the front of the rear seat cushion, and
remove the cushion.
STEP 3
Unclip the cover on the passenger side rear seat back latch.
STEP 7
Remove the bolts at the b ack of the rear seat cushion.
STEP 2
Fold the rear seat back forward and remove the trunk floor.
STEP 6
Remove the screws that hold the passenger side panel to
the floor.
STEP 1
Empty the cargo area of the vehicle.
STEP 5
Remove the screw that holds the rear of the passenger side
panel in place.
Loading...