JL Audio Stealthbox SB-H-PIO5/10TW3 Installation Manual
Continued on Next Page
SB-H-PIO5/10TW3 INSTR_SKU# 011453
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to per form the installation yoursel f, it is absolutely
vital that the Stealthb ox® be properly mo unted to the vehicle
according to these instr uctions. Failure to mount the enclosure
properly presents two problems:
1) T he sub-bass performan ce will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure p resents a serious safety haz ard in the event of a
collision or sudden deceleration.
INSTALLATION
DI FFIC ULT Y:
ESTIMATED TIME:
2 HOURS
2
5
OUT
OF
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
INSTALLATION GUIDE
for the
SB-H-PIO5/10TW3
SKU# 94627
2015 & Up Honda Pioneer 500
INCLUDED HARDWARE
Continued on Next Page
Page 2 • JL Audio, Inc., 2016
SB-H-PIO5/10TW3 INSTR_SKU# 011453
Note: For optimum p erformance, JL Audio recomme nds applying the included Foa m Strips (or sound damping material) to surro unding plastic panels to redu ce unwanted vibrations.
BOM ID Qty SKU Description
1 1 153746 5/16 - 18 x 1-1/2” Stainless Steel Low Prole Cap Screw
2 1 153741
5-16 - 18 x 3/4” Stainless Steel Serrated Flange Bolt
3 5 153742 5/16” Stainless Steel Flat Washer
4 1 153704 Inner Side Bracket
5 3 153743 5/16” Stainless Steel Serrated Spring Lock Washer
6 3 153744 5/16 - 18 Stainless Steel Hex Nut
7 7 153729 1/4 - 20 x 1” Stainless Steel Serrated Flange Bolt
8 1 153745 5/16 - 18 x 1-1/2” Stainless Steel Serrated Flange Bolt
9 1 153698 3/4” OD x 5/16” ID x 5/8” Aluminum Spacer
10 1 153706 Rear Bracket
11 2 153738 1/4” Stainless Steel Flat Washer
12 1 153705 Outer Side Bracket
13 1 153739 1/4” Stainless Steel Serrated Spring Lock Washer
14 1 153740 1/4 - 20 Stainless Steel Hex Nut
- 1 150249 Foam Strips (not shown)
POWER RECOMMENDATION
JL Audio recommends high quality amp liers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the
amplier settings, consult the own er’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
CONNECTIONS
Using quality power, signal, and speaker wire is essential in ensuring the p erformance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as the XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2016
SB-H-PIO5/10TW3 INSTR_SKU# 011453
Loading...