JL Audio Stealthbox SB-H-CRV2/10TW3 Installation Manual
INSTALLATION GUIDE
for the
SB-H-CRV2/10TW3
SKU# 94584, 94585, 94586
2012 & Up Honda CRV
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to per form the installation yoursel f, it is abso lutely vital
that the Stealthbox
®
be properly mo unted to the vehicle according to
these instruc tions. Failure to mount the enclosure properl y presents two
problems:
1) The sub-bass perfor mance will suffer due to the movement of th e
enclosure caused by the force exerte d by the woofer(s).
2) A loose enclosure present s a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DI FFIC ULT Y:
ESTIMATED TIME:
2 HOUR S
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
Continued on Next Page
2
5
OUT
OF
SB-H-CRV2/10TW3 INSTR_SKU# 011371
INCLUDED HARDWARE
Continued on Next Page
Page 2 • JL Audio, Inc., 2013
SB-H-CRV2/10TW3 INSTR_SKU# 011371
POWER RECOMMENDATION
JL Audio recommends high quality ampliers such as the JL Audio XD300/1. The diagram below shows the recommended crossover settings for the XD300/1. For a detailed description of the amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar set tings on that amplier.
CONNECTIONS
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthb ox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4 -1B for your Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect C ables should be used to provide signal for both
channels of the amplier. JL Audio reccomends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2013
SB-H-CRV2/10TW3 INSTR_SKU# 011371
Loading...