JL Audio Stealthbox SB-F-MUSCPE/12TW3 Installation Manual
INSTALLATION GUIDE
for the
SB-F-MUSCPE/12TW3
SKU# 94617
2015 - Up Ford Mustang Coupe
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to per form the installation yourse lf, it is absolutely vital
that the Stealthbox® be properly mo unted to the vehicle according to
these instruc tions. Failure to mount the enclosure properly presents two
problems:
1) The sub-bass perfor mance will suffer due to the movement of th e
enclosure caused by t he force exerted by the woofer(s).
2) A loose enclosure present s a serious safety hazard in th e event of a
collision or sudden deceleration.
INSTALLATION
DI FFIC ULT Y:
ESTIMATED TIME:
12 HOURS
Enclosure Type: Sealed
Driver Type: 12TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
Continued on Next Page
2
5
OUT
OF
SB-F-MUSCPE/12TW3 INSTR_SKU# 011432
INCLUDED HARDWARE
Continued on Next Page
Page 2 • JL Audio, Inc., 2015
SB-F-MUSCPE/12TW3 INSTR_SKU# 011432
Not shown: 1 150834 Trim Panel
1 151507 Velcro Strip
POWER RECOMMENDATION
JL Audio recommends high quality ampliers such as the JL Audio XD600/1v2. The diagram below shows the recommende d crossover settings for the XD600/1v2. For a detailed description of the
amplier settings, consult the owner’s manual for the amplier. If another amplier is b eing used, please reference this illustration and use similar settings on that amplier.
CONNECTIONS
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox ®. JL Audio recommends using a 4 AWG power kit such as the XD -PCS4-1B for your
Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio reccomends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2015
SB-F-MUSCPE/12TW3 INSTR_SKU# 011432
Loading...