JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2 Installation Manual
INSTALLATION GUIDE
for the
SB-F-150-SPRCRW/13TW5v2
SKU# 94460 - 94462
2009 & Up Ford F150 SuperCrew
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
If you choose to per form the installation yoursel f, it is abso lutely vital that
the Stealthbox® be properly mo unted to the vehicle according to these
instructions . Failure to mount the enclosure prop erly presents two problems:
1) The sub-bass per formance will suffer due to the movem ent of the enclosure
caused by the force exe rted by the woofer(s).
2) A loose enclosure presents a serious safety haza rd in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-F-150-SPRCRW/13TW5v2 INSTR _SKU# 011297
IN STALL ATIO N
DIFFICULTY:
2
5
OUT
OF
ESTIMATED TIME:
1 HOUR
SPECIFICATIONS
Enclosure Type: Sealed
Driver Type: 13T W5v2 -2
Nominal Impedance: 2 ohms
Continuous Power Handling: 600 watts (RMS metho d)
INCLUDED HARDWARE
(4) Encl osure Brac ket
(4) 1/4 - 20 x 1-1/2” Hex Drive Bolt
(4) 3” x 3” Wax Square
(4) 3/8” Flat Washer
(4) 3/8 - 16 x 1-3/4” Hex Bolt
(4) 3/8” Fender Washer
(4) 3/8” Split Lock Washer
(4) 3/8 - 16 Hex Nut
(1) Trim Panel
(1) #8 x 1” Self Tap Screw
SB-F-150-SPRCRW/13TW5v2 INSTR _SKU# 011297
POWER RECOMMENDATION
JL Audio recommends hi gh quality ampliers such as the J L Audio XD600/1v2. The diagram below shows the recom mended crossover settings fo r the XD600/1v2. For a detailed description of th e amplier settings,
consult the owner’s manua l for the amplier. If another amplier is b eing used, please reference this il lustration and use similar setti ngs on that amplier.
CONNECTIONS
Using quality powe r, signal, a nd speaker wire is essential in ensuring th e performance of your Stealthbox ®. JL Audio re commends using a 4 AWG power kit such as the XD -PCS4-1B for your Stealthbox® amplier. Other k its
are available should yo u be using more than one amplier. Signal wire s uch as the JL Audio Premium Audio Interconnec t Cables should be used to provi de signal for both channels of the ampli er. JL Audio
recommends using 12AWG speaker wire for su bwoofers such as our XC-BCS12-25.
Continued on Next Page Page 2 • JL Audio, Inc., 2016
Loading...