JL Audio Stealthbox 94376, Stealthbox SB-F-Edg/10W3v3 Installation Manual

I N S T A L L A T I O N G U I D E

for th e

SB-F-Edg/10W3v3

SKU#94376

2007+ Ford Edge

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.

S T E P 1

Remove the floor panel by lifting seat flaps. Carefully tilt
entire panel to exit hatch diagonally.

Continued on Next Page

S T E P 2

Remove threshold plate by lifting directly upward.

S T E P 3

Remove foam filler panel from passenger side of spare tire.

SB-F-EDG/10W3v3 INSTR_SKU# 011254

INS TALLATIO N
D I F F I C U LT Y :

35

OU T
OF

EST IMATED TIME:
23 HO URS

Continued on Next Page

SB-F-EDG/10W3v3_INSTR_SKU# 011254

S T E P 7

Remove passenger side cargo panel by prying away from
side of vehicle and floor.

S T E P 6

Pull passenger side cargo panel away from the door jamb.

S T E P 5

Remove passenger side threshold plate.

S T E P 4

Fold passenger side rear seat forward.

Remove bolt securing seat belt at lower front of cargo
side panel.

Page 2 • JL Audio, Inc 2008

S T E P 9

Carefully pry taillight assembly out, then back, from vehicle,
releasing two alignment pins at the front edge.

Remove bulbs from assembly by turning 1/4 turn to the left.

S T E P 1 1

Unpack Stealthbox® and install mounting stud into threaded
insert so that 1/2 to 3/4 inch extends from enclosure.

S T E P 1 0

Route woofer wiring to passenger side rear of cargo area.

S T E P 8

Remove passenger side taillight assembly by removing
(2) 8mm screws.