JL Audio SB-T-TACACG3/10TW3 Stealthbox Installation Guide

SB-T-TACACG3/10TW3 INSTR_SKU# 011503

If you choose to perform the installation yourself, it is absolutely
vital that the Stealthbox
according to these instructions. Failure to mount the enclosure
properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.

®

be properly mounted to the vehicle

INSTALLATION

DI FFICU LTY:

OUT

OF

5

1

ESTIMATED TIME:

1 HOUR

INSTALLATION GUIDE

for the

SB-T-TACACG3/10TW3

SKU# 94658

2016 & Up Toyota Tacoma Access Cab

Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

Continued on Next Page

INCLUDED HARDWARE

BOM ID Qty SKU Description

5 1 153944 Front Bracket

1 3 153117 1/4 - 20 x 1” Hex Head Bolt
2 3 151098

1/4” Split Lock Washer
3 3 151021 1/4” Flat Washer
4 1 153945 Rear Bracket

SB-T-TACACG3/10TW3 INSTR_SKU# 011503

Page 2 • JL Audio, Inc., 2017

Continued on Next Page