JL Audio SB-GM-TAHOCNSL-10W1v2, SB-GM-TAHOSCNSL-10W3v2 User Manual

SB-GM-TAHOCNSL/10W1v2

2007 - Up

Chevrolet / GMC Full-Size SUV’s & Truck

Avalanche, Suburban, Tahoe, Yukon & Yukon XL

with bucket seats and

factory console

SB-GM-TAHOSCNSL/10W3v2_INSTR_SKU#011220

INSTALLATION GUIDE

for the

SB-GM-TAHOCNSL/10W1v2

2007 - Up

Avalanche, Suburban, Tahoe, Yukon & Yukon XL

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 1 year if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

Chevrolet / GMC Full-Size SUV’s & Truck

with bucket seats and

before beginning the process.

factory console

If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.

be properly mounted to the vehicle according to these

STEP 1

Using masking tape or similar, mark where the bottom edge of the front center console meets the carpet on the driver’s side.

STEP 2

Using masking tape or similar, mark where the bottom edge of the front center console meets the carpet on the passenger’s side.

STEP 3

Open the storage lid of the center console. Remove the four exposed screws.

INSTALLATION DIFFICULTY:

OUT OF

Continued on Next Page

SB-GM-TAHOSCNSL/10W3v2_INSTR_SKU#011220

STEP 4

Remove the cup ho lders from center co n s ole by pull ing upwards.

STEP 5

With the cup holders removed, look through the opening and disconnect the exposed wiring harness plug.

STEP 6

Pull the wiring harness off the tab.

STEP 8

Pr y the rear face to t h e rear of the vehicle.

STEP 9

Remove all plugs from the rear face pl ate.

STEP 10

From the back side of the center console, fold down the cup holder s. Remove two screws be hind th e c up holders a s w ell as t h e three scre w s securing th e cup holder to the ce nter console.

Page 2 • JL Audio, Inc 2006

STEP 7

*Read S te p 7 & S te p 8 b e fo re a t t e mp t in g t he r em ov al o f the rea r f ac e pl at e .*

Car e fully p ry up a nd back on the two black t abs on either side of the console’s door hinge.

Extra care should be used in a effort to prevent break i ng t h es e t a bs .

Remove the back panel from the center console.

STEP 11

Remov e the wiring harne ss that is secured to t h e driv er’s side of the center console.

Continued on Next Page

+ 3 hidden pages