JL Audio SB-GM-BURB-10W3v3-BU, SB-GM-BURB-10W3v3-LT, SB-GM-BURB-10W3v3-BK, SB-GM-BURB-10W3v3-RD, SB-GM-BURB-10W3v3-TN User Manual
...
SB-GM-BURB/10W3 STEALTHBOX
™
Fits 92-97 GM Suburbans, 88-97 GM FullSize Trucks, 92-97 GMC Yukons and Chevy
Tahoes (2 and 4 Door Models)
Installation Guide:
This Stealthbox is designed to mount between the front bucket seats, replacing the center console.
It is not designed for installation in vehicles with bench seats.
Please read this installation guide thoroughly before beginning the project. It will guide you step by
step through the process. This product requires professional installation skills and tools. We highly
recommend that an authorized JL AUDIO dealer performs the installation.
It is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly will result in
inferior bass performance and potential danger in the event of
a collision or sudden jolt to the vehicle.
STEP 1: Remove the storage bin from the front portion of the
center console by gently prying it out. Save this piece for later
use.
STEP 2: Remove the inner storage bin from the console by
gently prying it out. Save this piece in the event that the
original console is ever reinstalled.
STEP 3: Using a 10mm socket, remove the two bolts that
hold the front console bracket to the floor.
Sheet SKU#011118 Revision 5/21/01SB-GM-BURB/10W3 - JL AUDIO, Inc 2001 • Page 1
STEP 4: Slide the console forward to dislodge it from the rear
support bracket. Remove the console.
STEP 5: Using a 10mm socket, remove the two bolts that hold
the rear bracket to the floor. Remove the bracket from the vehicle.
STEP 6: Place the two supplied 4" X 4" wax squares, sticky side down, in the approximate locations of the
Stealthbox mounting holes.
STEP 7: Thread both of the supplied 3/8" X 1 1/2" bolts fully into the threaded inserts in the bottom of
the Stealthbox.
STEP 8: Place the Stealthbox into its mounting location.
Be sure the Stealthbox is in the same relative position as the original factory console.
STEP 9: Press down firmly on the Stealthbox to leave impressions in the wax squares.
Sheet SKU#011118 Revision 5/21/01SB-GM-BURB/10W3 - JL AUDIO, Inc 2001 • Page 2
Loading...